Identifying factors limiting legume biomass production in a heterogeneous on-farm environment

Multipurpose legumes provide a wide range of benefits to smallholder production systems in the tropics. The degree of system improvement after legume introduction depends largely on legume biomass production, which in turn depends on the legumes' adaptation to environmental conditions. For Canavalia brasiliensis (canavalia), an herbaceous legume that has been recently introduced in the Nicaraguan hillsides, different approaches were tested to define the biophysical factors limiting biomass production on-farm, by combining information from topsoil chemical and physical properties, topography and soil profiles. Canavalia was planted in rotation with maize during two successive years on 72 plots distributed over six farms and at contrasting landscape positions. Above-ground biomass production was similar for both years and varied from 448 to 5357 kg/ha, with an average of 2117 kg/ha. Topsoil properties, mainly mineral nitrogen (N; ranging 25-142 mg/kg), total N (Ntot; 415-2967 mg/kg), soil organic carbon (SOC; 3-38 g/kg) and pH (5·3-7·1), significantly affected canavalia biomass production but explained only 0·45 of the variation. Topography alone explained 0·32 of the variation in canavalia biomass production. According to soil profiles descriptions, the best production was obtained on profiles with a root aggregation index close to randomness, i.e. with no major obstacles for root growth. When information from topsoil properties, topography and soil profiles was combined through a stepwise multiple regression, the model explained 0·61 of the variation in canavalia biomass (P<0·001) and included soil depth (0·5-1·70 m), slope position, amount of clay (19-696 kg/m2) and stones (7-727 kg/m2) in the whole profile, and SOC and N content in the topsoil. The linkages between topsoil properties, topography and soil profiles were further evaluated through a principal component analysis (PCA) to define the best landscape position for canavalia cultivation. The three data sets generated and used in the present study were found to be complementary. The profile description demonstrated that studies documenting heterogeneity in soil fertility should also consider deeper soil layers, especially for deep-rooted plants such as canavalia. The combination of chemical and physical soil properties with soil profile and topographic properties resulted in a holistic understanding of soil fertility heterogeneity and shows that a landscape perspective must be considered when assessing the expected benefits from multipurpose legumes in hillside environment

Quantitative Determination of Temperature in the Approach to Magnetic Order of Ultracold Fermions in an Optical Lattice

We perform a quantitative simulation of the repulsive Fermi-Hubbard model using an ultracold gas trapped in an optical lattice. The entropy of the system is determined by comparing accurate measurements of the equilibrium double occupancy with theoretical calculations over a wide range of parameters. We demonstrate the applicability of both high-temperature series and dynamical mean-field theory to obtain quantitative agreement with the experimental data. The reliability of the entropy determination is confirmed by a comprehensive analysis of all systematic errors. In the center of the Mott insulating cloud we obtain an entropy per atom as low as 0.77k(B) which is about twice as large as the entropy at the Neel transition. The corresponding temperature depends on the atom number and for small fillings reaches values on the order of the tunneling energy

Haemodialysis activates phospholipase A2 enzyme

Background Clinical and experimental evidence suggest that haemodialysis (HD) procedure is an inflammatory process. For the production of proinflammatory lipid mediators in many inflammatory reactions, the release of arachidonic acid by phospholipase A2 (PLA2 enzyme is a prerequisite. Therefore, the purpose of the present investigation was to establish whether the activity of PLA2 increases during HD and whether the increase depends on the type of dialyser used. Methods We performed dialysis in eight chronic HD patients. Blood samples entering and leaving the dialyser were obtained before and at 15, 60, 120 and 180 min after the dialysis was started, on one occasion using a cuprophane and on another occasion a cellulose triacetate dialyser. PLA2 activity was assessed in crude plasma and in plasma extract. Results PLA2 activity in plasma extract exhibited similar biochemical properties to that of inflammatory human synovial fluid PLA2 enzyme which is of group II PLA2. PLA2 activity in crude plasma represents a type of PLA2 other than the synovial type. In HD patients, baseline PLA2 activities in crude plasma and plasma extract were significantly increased when compared to normal subjects. An increase in PLA2 activity was observed in crude plasma with a peak appearing at 15 min when the patients were dialysed with cuprophane and cellulose triacetate membranes. This increase was observed in both arterial and venous blood samples and was more pronounced when the patients were dialysed with cuprophane than with cellulose triacetate membranes. When PLA2 was assessed in plasma extract, the activity increased only with cuprophane but not with cellulose triacetate membranes. Conclusions PLA2 activity in plasma is increased in HD patients and increases during the dialysis procedure to a greater extent with a less biocompatible membrane. Continuous activation of PLA2 might be relevant for long-term deleterious consequences of H

Joint field experiments for comparisons of measuring methods of photosynthetic production

During the 1st GAP Workshop at Konstanz in April 1982 comparative measurements of phytoplankton primary production by several techniques were conducted simultaneously at an offshore station in Lake Konstanz and an experimental algal pond. Suspended glass bottle exposure techniques using 14C and 13C uptake gave Pz (mg C m−3 h−1) values which varied considerably near-surface, but estimates of areal rates for the euphotic zone ΣPcu(mg C m−3 h−1) which were reasonably close. In the lake, ΣPz, from a vertical tube exposure (with 14C uptake) was greater than rates derived for integrated bottle samples. The oxygen bottle method permitted a good estimate of compensation depth, corresponding to in situ growth studies. There were difficulties in direct comparison between O2 and carbon methods. Correlation between them for Pz was good in the lake but poor in the pond, both for suspended bottle and vertical tube methods. This series demonstrates that despite reasonable overall estimates, comparatively minor methodological differences in experimental technique can cause large variatio

Near streambed flow shapes microbial guilds within and across trophic levels in fluvial biofilms

Flow is an important physical driver of biofilm communities. Here, we tested the effects of the near bed flows in two mountainous stream reaches on the structure of biofilm microbial guilds (autotrophs, heterotrophic bacteria, and heterotrophic protists) within and across trophic levels. Near bed flow velocity and turbulent kinetic energy were important physical drivers for structuring the communities within and across guilds of the multitrophic fluvial biofilms. The effects of flow were nested in a seasonal and spatial (across-streams) context. Changes in physicochemical factors (temperature, light, dissolved carbon, and nutrients) along the reaches were alike in both streams suggesting that environmental boundary conditions at larger temporal scales were responsible for the seasonal differences of biofilm communities, whereas locally microbial diversity was shaped by near bed flow. Typically, the abundance of autotrophs increased with flow, indicating that biofilms shifted toward increasing autotrophy with increasing shear forces. Filamentous autotrophs seemed to provide protected habitats from the shear forces for smaller sized bacteria. Heterotrophic protist abundance decreased with flow leading to decreasing grazer to prey ratio. Bacteria thus benefitted from a reduction in grazing pressure at faster flowing, more turbulent sites. Our results suggest that near bed flow can impact the magnitude and direction of matter fluxes through the microbial food web and possibly affect ecosystem functioning of fluvial biofilms

Creating, moving and merging Dirac points with a Fermi gas in a tunable honeycomb lattice

Dirac points lie at the heart of many fascinating phenomena in condensed matter physics, from massless electrons in graphene to the emergence of conducting edge states in topological insulators [1, 2]. At a Dirac point, two energy bands intersect linearly and the particles behave as relativistic Dirac fermions. In solids, the rigid structure of the material sets the mass and velocity of the particles, as well as their interactions. A different, highly flexible approach is to create model systems using fermionic atoms trapped in the periodic potential of interfering laser beams, a method which so far has only been applied to explore simple lattice structures [3, 4]. Here we report on the creation of Dirac points with adjustable properties in a tunable honeycomb optical lattice. Using momentum-resolved interband transitions, we observe a minimum band gap inside the Brillouin zone at the position of the Dirac points. We exploit the unique tunability of our lattice potential to adjust the effective mass of the Dirac fermions by breaking inversion symmetry. Moreover, changing the lattice anisotropy allows us to move the position of the Dirac points inside the Brillouin zone. When increasing the anisotropy beyond a critical limit, the two Dirac points merge and annihilate each other - a situation which has recently attracted considerable theoretical interest [5-9], but seems extremely challenging to observe in solids [10]. We map out this topological transition in lattice parameter space and find excellent agreement with ab initio calculations. Our results not only pave the way to model materials where the topology of the band structure plays a crucial role, but also provide an avenue to explore many-body phases resulting from the interplay of complex lattice geometries with interactions [11, 12]

Protocolised early de-resuscitation in septic shock (REDUCE): protocol for a randomised controlled multicentre feasibility trial.

BACKGROUND Fluid overload is associated with excess mortality in septic shock. Current approaches to reduce fluid overload include restrictive administration of fluid or active removal of accumulated fluid. However, evidence on active fluid removal is scarce. The aim of this study is to assess the efficacy and feasibility of an early de-resuscitation protocol in patients with septic shock. METHODS All patients admitted to the intensive care unit (ICU) with a septic shock are screened, and eligible patients will be randomised in a 1:1 ratio to intervention or standard of care. INTERVENTION Fluid management will be performed according to the REDUCE protocol, where resuscitation fluid will be restricted to patients showing signs of poor tissue perfusion. After the lactate has peaked, the patient is deemed stable and assessed for active de-resuscitation (signs of fluid overload). The primary objective of this study is the proportion of patients with a negative cumulative fluid balance at day 3 after ICU. Secondary objectives are cumulative fluid balances throughout the ICU stay, number of patients with fluid overload, feasibility and safety outcomes and patient-centred outcomes. The primary outcome will be assessed by a logistic regression model adjusting for the stratification variables (trial site and chronic renal failure) in the intention-to-treat population. ETHICS AND DISSEMINATION The study was approved by the respective ethical committees (No 2020-02197). The results of the REDUCE trial will be published in an international peer-reviewed medical journal regardless of the results. TRIAL REGISTRATION NUMBER ClinicalTrials.gov, NCT04931485

Artificial graphene as a tunable Dirac material

Artificial honeycomb lattices offer a tunable platform to study massless Dirac quasiparticles and their topological and correlated phases. Here we review recent progress in the design and fabrication of such synthetic structures focusing on nanopatterning of two-dimensional electron gases in semiconductors, molecule-by-molecule assembly by scanning probe methods, and optical trapping of ultracold atoms in crystals of light. We also discuss photonic crystals with Dirac cone dispersion and topologically protected edge states. We emphasize how the interplay between single-particle band structure engineering and cooperative effects leads to spectacular manifestations in tunneling and optical spectroscopies.Comment: Review article, 14 pages, 5 figures, 112 Reference

ALA and ALA hexyl ester induction of porphyrins after their systemic administration to tumour bearing mice

The use of synthetic lipophilic molecules derived from 5-aminolevulinic acid (ALA) is currently under investigation to enhance cellular ALA penetration. In this work we studied the effect of systemic administration to mice of the hexyl ester of ALA (He-ALA) on porphyrin tissue synthesis as compared to ALA. In most normal tissues as well as in tumour, He-ALA induced less porphyrin synthesis than ALA after its systemic administration either intravenous or intraperitoneal, although explant organ cultures exposed to either ALA or He-ALA revealed equally active esterases. The only tissue that accumulated higher porphyrin levels from He-ALA (seven times more than ALA) was the brain, and this correlated well with a rapid increase in ALA/He-ALA content in brain after administration of He-ALA. This may be ascribed to a differential permeability to lipophilic substances controlled by the blood–brain barrier, a feature which could be further exploited to treat brain tumours