5,309 research outputs found
Elastocapillary folding of three dimensional micro-structures using water pumped through the wafer via a silicon nitride tube
In this paper we present the first investigation of a batch method for folding of threedimensional micrometer-sized silicon nitride structures by capillary forces. Silicon nitride tubes have been designed and fabricated using DRIE at the center of the planar origami patterns of the structures. Water is brought to the structures by pumping the liquid through the wafer via those tubes. Isolated micro-structures were successfully folded using this method. The potential of this technique for batch self-assembly is discussed
Monolithic Integration of a Novel Microfluidic Device with Silicon Light Emitting Diode-Antifuse and Photodetector
Light emitting diode antifuse has been integrated into a microfluidic device that is realized with extended standard CMOS technological steps. The device comprises of a microchannel sandwiched between a photodiode detector and a nanometer-scale diode antifuse light emitter. Within this contribution, the device fabrication process, working principle and properties will be discussed. Change in the interference fringe of the antifuse spectra has been measured due to the filling of the channel. Preliminary applications are electroosmotic flow speed measurement, detection of absorptivity of liquids in the channe
Using phase relations in microstrip directional couplers to achieve high directivity
Cataloged from PDF version of article.We analyze the microstrip directional couplers with a special focus on the phase difference between the coupled and isolated ports. The analysis uses the even-odd mode decomposition technique and network theory. The results show that the phase difference between the signals at the coupled port and the isolated port is close to in a very wide band. This property can be used to achieve a broadband directivity by inducing a voltage cancellation at the isolated port of the couplers. Two different cancellation methods are investigated. Analytical formulas for the required component values of both methods are given. Higher directivity can be obtained at the expense of reduced bandwidth
An Optimized Isolation Network for the Wilkinson Divider
Cataloged from PDF version of article.We propose an isolation network to simultaneously
improve the input return loss, output return loss and isolation of
the Wilkinson power divider in a wide bandwidth. The required
even mode and odd mode reflection coefficients of the isolation network
are calculated. Constructed even and odd mode circuits are
combined to give the desired isolation network. Analytical expressions
for the optimal component values for a single-section divider
are given. Compared with the single-section Wilkinson divider, the
final design can triple the bandwidth for an input-output return
loss and isolation of greater than 25 dB. Broadband characteristic
is achieved without increasing the number of sections hence extra
length and insertion loss are avoided. Wide operation bandwidth
of the new divider is verified by experimental results. The proposed
method can be applied to a two-section divider, also broadening its
bandwidth
Scaling behaviour of pressure driven micro hydraulic systems
This paper presents a lumped network approach for the modelling and design of micro-hydraulic systems. A hydraulic oscillator has been built consisting of hydraulic resistors, capacitors and transistors (pressure controlled valves). The scaling of micro-hydraulic networks consisting of linear resistors, capacitors and inertances has been studied. An important result is that to make smaller networks faster, driving pressures should increase with reducing size
Recommended from our members
Emission of volatile halogenated organic compounds over various Dead Sea landscapes
Volatile halogenated organic compounds (VHOCs), such as methyl halides (CH3X; X is Br, Cl and I) and very short-lived halogenated substances (VSLSs; bromoform-CHBr3, dibromomethane-CH2Br2, bromodichloromethane-CHBrCl2, trichloroethylene-C2HCl3, chloroform-CHCl3- A nd dibromochloromethane-CHBr2Cl) are well known for their significant influence on ozone concentrations and oxidation capacity of the troposphere and stratosphere and for their key role in aerosol formation. Insufficient characterization of the sources and the emission rate of VHOCs limits our ability to understand and assess their impact in both the troposphere and stratosphere. Over the last two decades, several natural terrestrial sources for VHOCs, including soil and vegetation, have been identified, but our knowledge of emission rates from these sources and their responses to changes in ambient conditions remains limited. Here we report measurements of the mixing ratios and fluxes of several chlorinated and brominated VHOCs from different landscapes and natural and agricultural vegetated sites at the Dead Sea during different seasons. Fluxes were generally positive (emission into the atmosphere), corresponding to elevated mixing ratios, but were highly variable. Fluxes (and mixing ratios) for the investigated VHOCs ranged as follows: CHBr3 from 79 to 187 nmolm2 d1 (1.9 to 22.6 pptv), CH2Br2 from 55 to 71 nmolm2 d1 (0.7 to 19 pptv), CHBr2Cl from 408 to 768 nmolm2 d1 (0.4 to 11 pptv), CHBrCl2 from 29 to 45 nmolm2 d1 (0.5 to 9.6 pptv), CHCl3 from 577 to 883 nmolm2 d1 (15 to 57 pptv), C2HCl3 from 74 to 884 nmolm2 d1 (0.4 to 11 pptv), methyl chloride (CH3Cl) from-5300 to 10,800 nmolm2 d1 (530 to 730 pptv), methyl bromide (CH3Br) from 111 to 118 nmolm2 d1 (7.5 to 14 pptv) and methyl iodide (CH3I) from 25 to 17 nmolm2 d1 (0.4 to 2.8 pptv). Taking into account statistical uncertainties, the coastal sites (particularly those where soil is mixed with salt deposits) were identified as sources of all VHOCs, but this was not statistically significant for CHCl3. Further away from the coastal area, the bare soil sites were sources for CHBrCl2, CHBr2Cl, CHCl3, and probably also for CH2Br2 and CH3I, and the agricultural sites were sources for CHBr3, CHBr2Cl and CHBrCl2. In contrast to previous reports, we also observed emissions of brominated trihalomethanes, with net molar fluxes ordered as follows: CHBr2Cl > CHCl3 > CHBr3 > CHBrCl2 and lowest positive flux incidence for CHCl3 among all trihalomethanes; this finding can be explained by the soil's enrichment with Br. Correlation analysis, in agreement with recent studies, indicated common controls for the emission of CHBr2Cl and CHBrCl2 and likely also for CHBr3. There were no indications for correlation of the brominated trihalomethanes with CHCl3. Also in line with previous reports, we observed elevated emissions of CHCl3 and C2HCl3 from mixtures of soil and different salt-deposited structures; the flux correlations between these compounds and methyl halides (particularly CH3I) suggested that at least CH3I is also emitted via similar mechanisms or is subjected to similar controls. Overall, our results indicate elevated emission of VHOCs from bare soil under semiarid conditions. Along with other recent studies, our findings point to the strong emission potential of a suite of VHOCs from saline soils and salt lakes and call for additional studies of emission rates and mechanisms of VHOCs from saline soils and salt lakes
Unidirectional Invisibility and PT-Symmetry with Graphene
We investigate the reflectionlessness and invisibility properties in the
transverse electric (TE) mode solution of a linear homogeneous optical system
which comprises the -symmetric structures covered by graphene
sheets. We derive analytic expressions, indicate roles of each parameter
governing optical system with graphene and justify that optimal conditions of
these parameters give rise to broadband and wide angle invisibility. Presence
of graphene turns out to shift the invisible wavelength range and to reduce the
required gain amount considerably, based on its chemical potential and
temperature. We substantiate that our results yield broadband reflectionless
and invisible configurations for realistic materials of small refractive
indices, usually around , and of small thickness sizes with graphene
sheets of rather small temperatures and chemical potentials. Finally, we
demonstrate that pure -symmetric graphene yields invisibility at
small temperatures and chemical potentials.Comment: 20 pages, 1 table 17 figure
- …