Dielectric function of InGaAs in the visible

Measurements are reported of the dielectric function of thermodynamically stable In(x)Ga(1-x)As in the composition range 0.3 equal to or less than X = to or less than 0.7. The optically thick samples of InGaAs were made by molecular beam epitaxy (MBE) in the range 0.4 = to or less than X = to or less than 0.7 and by metal-organic chemical vapor deposition (MOCVD) for X = 0.3. The MBE made samples, usually 1 micron thick, were grown on semi-insulating InP and included a strain release structure. The MOCVD sample was grown on GaAs and was 2 microns thick. The dielectric functions were measured by variable angle spectroscopic ellipsometry in the range 1.55 to 4.4 eV. The data was analyzed assuming an optically thick InGaAs material with an oxide layer on top. The thickness of this layer was estimated by comparing the results for the InP lattice matched material, i.e., X = 0.53, with results published in the literature. The top oxide layer mathematically for X = 0.3 and X = 0.53 was removed to get the dielectric function of the bare InGaAs. In addition, the dielectric function of GaAs in vacuum, after a protective arsenic layer was removed. The dielectric functions for X = 0, 0.3, and 0.53 together with the X = 1 result from the literature to evaluate an algorithm for calculating the dielectric function of InGaAs for an arbitrary value of X(0 = to or less than X = to or less than 1) were used. Results of the dielectric function calculated using the algorithm were compared with experimental data

Study of InGaAs based MODFET structures using variable angle spectroscopic ellipsometry

Variable angle spectroscopic ellipsometry was used to estimate the thicknesses of all layers within the optical penetration depth of InGaAs based MODFET structures. Strained and unstrained InGaAs channels were made by MBE on InP substrates and by MOCVD on GaAs substrates. In most cases, ellipsometrically determined thicknesses were within 10 percent of the growth calibration results. The MBE made InGaAs strained layers showed large strain effects, indicating a probable shift in the critical points of their dielectric function toward the InP lattice matched concentration

Scaling and diffusion of oil spills in the Ocean Surface

The region of the Gulf of Lions at the northwestern Mediterranean Sea has been studied within a ten-year period from December 1996 until November 2006. More than 1000 synthetic aperture radar (SAR) images, which have been acquired by the Second European Remote Sensing Satellite (ERS 1/2) as well as from ENVISAT. We present statistical results of the structure of several features revealed by SAR such as oil spills and tensioactive slicks dynamic. We compare oil splils obtained from the projects Clean Seas,ENVA4/CT/0334, RC2003/005700, ESP2005/07551 and ESA/AO/IP2240. Since natural (caused by plankton, fish, etc.) slicks as well as man-made oil slicks dampen the small-scale surface waves, which are responsible for the radar backscattering from the ocean surface, both types of effects may be confused and give look/alike false oil spill detections. The early SAR images were processed at a resolution of 1 pixel=200m and were provided by the RApid Information Dissemination System (RAIDS) SAR processing facility in West Freugh, UK. Recent ENVISAT images directly from ESA allow a higher resolution of 1 pixel = 26 m, improving the detected turbulent scaling range. The occurrence of marine oil pollution as well as several dynamic features near Barcelona (frames 8-10, 19, 20; 200 SAR images)is itself a random multi-scale process. The use of different multifractal techniques, both using limits to the smallest and largest available scales, show that the scaling laws are very complex and depend strongly on intermittency of the assumed turbulent cascade, the shapes of the multifractal spectra functions are seen to deviate from an homogeneous multifractal and depend both on the initial conditions of the spill or slick, and on the transit time that the spill has been subjected to the local turbulence

Multifractal observations of eddies, oil spills and natural slicks in the ocean surface

Natural and man-made distributions of tensioactive substance concentrations in the sea surface features exhibit self-similarity at all radar reflectivity levels when illuminated by SAR. This allows the investigation of the traces produced by vortices and other features in the ocean surface. The man-made oil spills besides often presenting some linear axis of the pollutant concentration produced by moving ships also show their artificial production in the sea surface by the reduced range of scales, which widens as time measured in terms of the local eddy diffusivity distorts the shape of the oil spills. Thanks to this, multifractal analysis of the different backscattered intensity levels in SAR imagery can be used to distinguish between natural and man-made sea surface features due to their distinct self-similar properties. The differences are detected using the multifractal box-counting algorithm on different sets of SAR images giving also information on the age of the spills. Different multifractal algorithms are compared presenting the differences in scaling as a function of some physical generating process such as the locality or the spectral energy cascade

Protein spot arrays on graphene oxide coatings for efficient single-cell capture

Biomedical applications such as cell screening or cell–cell interaction studies require placement and adhesion of cells on surfaces with controlled numbers and location. In particular, single-cell arraying and positioning has come into focus as a basis of such applications. An ideal substrate would combine biocompatibility with favorable attributes such as pattern stability and easy processing. Here, we present a simple yet effective approach to single-cell arraying based on a graphene oxide (GO) surface carrying protein (fibronectin) microarrays to define cell adhesion points. These capture NIH-3T3 cells, resulting in cell arrays, which are benchmarked against analogous arrays on silanized glass samples. We reveal significant improvement in cell-capture performance by the GO coating with regards to overall cell adhesion and single-cell feature occupancy. This overall improvement of cell-arraying combined with retained transparency of substrate for microscopy and good biocompatibility makes this graphene-based approach attractive for single-cell experiments

Phospholipid arrays on porous polymer coatings generated by micro-contact spotting

Nanoporous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate) (HEMA-EDMA) is used as a 3D mesh for spotting lipid arrays. Its porous structure is an ideal matrix for lipid ink to infiltrate, resulting in higher fluorescent signal intensity as compared to similar arrays on strictly 2D substrates like glass. The embedded lipid arrays show high stability against washing steps, while still being accessible for protein and antibody binding. To characterize binding to polymer-embedded lipids we have applied Streptavidin as well as biologically important biotinylated androgen receptor binding onto 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-(cap biotinyl) (Biotinyl Cap PE) and anti-DNP IgE recognition of 2,4-dinitrophenyl[1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-[6-[(2,4-dinitrophenyl)amino]hexanoyl] (DNP)] antigen. This approach adds lipid arrays to the range of HEMA polymer applications and makes this solid substrate a very attractive platform for a variety of bio-applications

Sensitivity of Space Launch System Buffet Forcing Functions to Buffet Mitigation Options

Time-varying buffet forcing functions arise from unsteady aerodynamic pressures and are one of many load environments, which contribute to the overall loading condition of a launch vehicle during ascent through the atmosphere. The buffet environment is typically highest at transonic conditions and can excite the vehicle dynamic modes of vibration. The vehicle response to these buffet forcing functions may cause high structural bending moments and vibratory environments, which can exceed the capabilities of the structure, or of vehicle components such as payloads and avionics. Vehicle configurations, protuberances, payload fairings, and large changes in stage diameter can trigger undesirable buffet environments. The Space Launch System (SLS) multi-body configuration and its structural dynamic characteristics presented challenges to the load cycle design process with respect to buffet-induced loads and responses. An initial wind-tunnel test of a 3-percent scale SLS rigid buffet model was conducted in 2012 and revealed high buffet environments behind the booster forward attachment protuberance, which contributed to reduced vehicle structural margins. Six buffet mitigation options were explored to alleviate the high buffet environments including modified booster nose cones and fences/strakes on the booster and core. These studies led to a second buffet test program that was conducted in 2014 to assess the ability of the buffet mitigation options to reduce buffet environments on the vehicle. This paper will present comparisons of buffet forcing functions from each of the buffet mitigation options tested, with a focus on sectional forcing function rms levels within regions of the vehicle prone to high buffet environments

Review of Major Crop and Animal Arthropod Pests of South Texas

The Lower Rio Grande Valley is an area in Texas that consists of the four southern-most counties. This area contains a diverse range of agriculture and land-use including vegetable, row-crop and livestock production. The year-around cool to hot subtropical climate means that green vegetation is continually present, including many crops. Geographically, it shares an international border, making it a region vulnerable to new invasive species and the re-introduction of pests that have been previously eliminated in the United States. These combined factors lead to an array of arthropod pests that may have serious impacts on the crops, animals, and people in the region. This review focuses on arthropod pests that have historically, currently, or have the potential to significantly impact vegetables, row-crops, livestock, and humans in the LRGV. This is not an all-inclusive re-view but aims to focus on many of the arthropods that have been significant in the last 20 years

Constructing a logistics space: perspectives form the Gulf Cooperation Council

Development plans across the Gulf Cooperation Council emphasise logistical infrastructure as a driver of economic diversification. Investments in maritime ports, roads, rail, airports and logistics cities are transforming the economic geography of the region. This study aims to make visible this neglected aspect of the physical transformation of the Gulf Cooperation Council with a focus on the understudied maritime container ports in Oman and Qatar. Shifting the analysis to emergent maritime logistical infrastructure at a regional level gives insight into the uneven developments within the Gulf Cooperation Council’s integration project. Three key features emerge: (a) a large degree of duplication in maritime port infrastructure across Gulf Cooperation Council states; (b) a regional hierarchy among Gulf Cooperation Council states that are resource rich and those dependent on public–private partnerships and (c) increasing competition among internationally dominant port operators looking to gain access to the Gulf Cooperation Council maritime port market. These features both reflect and reinforce competitive tensions within the regional integration project

Mental, Social and Visual Alienation in D’Alessandro’s Photography

This chapter analyzes the first of several photobooks that illustrated the reform of psychiatric health care in Italy in the 1960s and 1970s: Luciano D’Alessandro’s 1969 Gli esclusi. In 1967, D’Alessandro was invited by the director of the asylum of Nocera Superiore, Sergio Piro, to document through photography the abysmal conditions of the “total institution” that was the pre-reform mental hospital. D’Alessandro first published a small selection of photos, in Popular Photography Italiana (1967), which he then expanded in Gli esclusi. This chapter claims that, in the evolution between the two publications, we can read the complex and multilayered notion of alienation that informed the work of reform, especially that of one of the most famous figures associated with it, Franco Basaglia. By analyzing D’Alessandro’s Gli esclusi through the notion of alienation, this chapter lets what Sekula calls the conditions of “readability” of the photographic message emerge