Low-dimensional formamidinium lead perovskite architectures via controllable solvent intercalation

We report the formation of a new class of solvent-intercalated two-dimensional (SI-2D) formamidinium lead halide perovskites. They can be mixed with three-dimensional (3D) stoichiometric perovskites by controlling the ratio of the precursor solutions. The composite leads to greatly improved photoluminescence quantum yield (PLQY) over the 3D compound. The enhanced PLQY is attributed to a type-I band alignment between the 3D and SI-2D, as revealed by first-principles calculations, which results in confined excitons with enhanced radiative recombination. The films exhibited excellent thermal and air stability retaining PLQY > 20% over 2 months in ambient conditions. Assemblies of halide perovskites with mixed dimensionality offer a pathway to enhance optoelectronic performance and device lifetimes

Programmable and Self-Healable Liquid Crystal Elastomer Actuators Based on Halogen Bonding

Peer reviewe

Graphene-intercalated Fe2O3/TiO2 heterojunctions for efficient photoelectrolysis of water

Interfacial modification of alpha-Fe2O3/TiO2 multilayer photoanodes by intercalating few-layer graphene (FLG) was found to improve water splitting efficiency due to superior transport properties, when compared to individual iron and titanium oxides and heterojunctions thereof. Both metal oxides and graphene sheets were grown by plasma-enhanced chemical vapor deposition. Compared to the onset potential achieved for alpha-Fe2O3 films (1 V vs. RHE), the alpha-Fe2O3/TiO2 bilayer structure yielded a better onset potential (0.3 V vs. RHE). Heterojunctioned bilayers exhibited a higher photocurrent density (0.32 mA cm(-2) at 1.23 V vs. RHE) than the single alpha-Fe2O3 layer (0.22 mA cm(-2) at 1.23 V vs. RHE), indicating more efficient light harvesting and higher concentration of photogenerated charge carriers. For more efficient charge transport at the interface, a few layer graphene sheet was intercalated into the alpha-Fe2O3/TiO2 interface, which substantially increased the photocurrent density to 0.85 mA cm(-2) (1.23 V vs. RHE) and shifted the onset potential (0.25 V vs. RHE). Ultrafast transient absorption spectroscopy studies indicated that the incorporation of FLG between the alpha-Fe2O3 and TiO2 layers resulted in reduced recombination in the alpha-Fe2O3 layer. The results showed that graphene intercalation improved the charge separation and the photocurrent density of the FTO/alpha-Fe2O3/FLG/TiO2 system

Protonation-induced fluorescence modulation of carbazole-based emitters

The development of purely organic fluorescence emitters is of great importance for their low cost and high performance. Responding to this demand, carbazole is a promising emitter due to its extensive freedom for functionalisation, high thermal and chemical stability, as well as low cost. Herein, the effect of protonation on the fluorescence of various pyridine-functionalised carbazole-based bipolar host materials was studied both in solution and in the solid-state. The restriction of intramolecular rotation of the molecules upon protonation of the pyridyl-moiety together with easier planarization of the protonated acceptor and the donor moieties and relocalisation of the LUMO orbital on the protonated species was found to increase the fluorescence quantum yield from 16% to 80%. Additionally, in the solid-state, the J-type packing of the molecules further facilitated the increase in the fluorescence quantum yield from 1% to 49%. In both cases, the pronounced bathochromic spectral shift was observed indicating that the gap between the emissive state and the first triplet state of the molecules was diminished upon protonation. Therefore, implementing this strategy could further boost the development of future emitters.peerReviewe

Electrospun black titania nanofibers: Influence of hydrogen plasma-induced disorder on the electronic structure and photoelectrochemical performance

This work encompasses a facile method for tailoring surface defects in electrospun TiO2 nano\ufb01bers by employing hydrogen plasma treatments. This amiable processing method was proven with SQUID, EPR, and XPS to be highly e\ufb00ective in generating oxygen vacancies, accompanied by the reduction of Ti4+ centers to Ti3+, resulting in the formation of black titania. The treatment temperature was found to a\ufb00ect the Ti3+/Ti4+ ratios and surface valence, while preserving the original 1D morphology of the titania \ufb01bers. Ab initio DFT calculations showed that a high concentration of oxygen vacancies is highly e\ufb03cient in producing midgap states that enhance the system absorption over the whole visible range, as observed with UV/ vis/NIR di\ufb00use re\ufb02ectance spectroscopy. Pristine TiO2 nano\ufb01bers produced a photocurrent density of 3c0.02 mA/cm2 at 1.23 V vs RHE, whereas the hydrogen plasma treatment resulted in up to a 10-fold increase in the photoelectrochemical performance

Pt-functionalized Fe2O3photoanodes for solar water splitting: the role of hematite nano-organization and the platinum redox state

Pt/α-Fe2O3 nanocomposites were synthesized on fluorine-doped tin oxide (FTO) substrates by a sequential plasma enhanced-chemical vapor deposition (PE-CVD)/radio frequency (RF) sputtering approach, tailoring the overall Pt content as a function of sputtering time. The chemico-physical properties of the as-prepared systems were extensively investigated by means of complementary techniques, including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field emission-scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDXS), secondary ion mass spectrometry (SIMS), and optical absorption spectroscopy, and compared to those of the homologous Pt/α-Fe2O3 systems annealed in air prior and/or after sputtering. The obtained results evidenced that the material compositional, structural and morphological features, with particular regard to the Pt oxidation state and hematite nano-organization, could be finely tailored as a function of the adopted processing conditions. Pt/α-Fe2O3 systems were finally tested as photoanodes in photoelectrochemical (PEC) water splitting experiments, evidencing a remarkable interplay between functional performances and the above-mentioned material properties, as also testified by transient absorption spectroscopy (TAS) results

Water Splitting: Fe2O3–TiO2 Nano-heterostructure Photoanodes for Highly Efficient Solar Water Oxidation (Adv. Mater. Interfaces 17/2015)

n/