Key Success Factors and Future Perspective of Silicon-Based Solar Cells

Today, after more than 70 years of continued progress on silicon technology, about 85% of cumulative installed photovolatic (PV) modules are based on crystalline silicon (c-Si). PV devices based on silicon are the most common solar cells currently being produced, and it is mainly due to silicon technology that the PV has grown by 40% per year over the last decade. An additional step in the silicon solar cell development is ongoing, and it is related to a further efficiency improvement through defect control, device optimization, surface modification, and nanotechnology approaches. This paper attempts to briefly review the most important advances and current technologies used to produce crystalline silicon solar devices and in the meantime the most challenging and promising strategies acting to increase the efficiency to cost/ratio of silicon solar cells. Eventually, the impact and the potentiality of using a nanotechnology approach in a silicon-based solar cell are also described

Concept for a Time-of-Flight Small Angle Neutron Scattering Instrument at the European Spallation Source

A new Small Angle Neutron Scattering instrument is proposed for the European Spallation Source. The pulsed source requires a time-of-flight analysis of the gathered neutrons at the detector. The optimal instrument length is found to be rather large, which allows for a polarizer and a versatile collimation. The polarizer allows for studying magnetic samples and incoherent background subtraction. The wide collimation will host VSANS and SESANS options that increase the resolution of the instrument towards um and tens of um, respectively. Two 1m2 area detectors will cover a large solid angle simultaneously. The expected gains for this new instrument will lie in the range between 20 and 36, depending on the assessment criteria, when compared to up-to-date reactor based instruments. This will open new perspectives for fast kinetics, weakly scattering samples, and multi-dimensional contrast variation studies.Comment: 18 pages, 10 figure

Dewetting of thin polymer films: Influence of interface evolution

The dewetting dynamics of ultrathin polymer films, e.g. in the model system of polystyrene on a polydimethylsiloxane-covered substrate, exhibits interesting behavior like a fast decay of the dewetting velocity and a maximum in the width of the built-up rim in the course of time. These features have been recently ascribed to the relaxation of residual stresses in the film that stem from the nonequilibrium preparation of the samples. Recent experiments by Coppee et al. on PS with low molecular weight, where such stresses could not be evidenced, showed however similar behavior. By scaling arguments and numerical solution of a thin film viscoelastic model we show that the maximum in the width of the rim can be caused by a temporal evolution of the friction coefficient (or equivalently of the slip length), for which we discuss two possible mechanisms. In addition, the maximum in the width is affected by the sample age. As a consequence, knowing the temporal behavior of friction (or slip length) in principle allows to measure the aging dynamics of a polymer-polymer interface by simple dewetting experiments.Comment: 6 pages, 2 figure

Homodyne solid-state biased coherent detection of ultra-broadband terahertz pulses with static electric fields

We present an innovative implementation of the solid-state-biased coherent detection (SSBCD) technique, which we have recently introduced for the reconstruction of both amplitude and phase of ultra-broadband terahertz pulses. In our previous works, the SSBCD method has been operated via a heterodyne scheme, which involves demanding square-wave voltage amplifiers, phase-locked to the THz pulse train, as well as an electronic circuit for the demodulation of the readout signal. Here, we demonstrate that the SSBCD technique can be operated via a very simple homodyne scheme, exploiting plain static bias voltages. We show that the homodyne SSBCD signal turns into a bipolar transient when the static field overcomes the THz field strength, without the requirement of an additional demodulating circuit. Moreover, we introduce a differential configuration, which extends the applicability of the homodyne scheme to higher THz field strengths, also leading a two-fold improvement of the dynamic range compared to the heterodyne counterpart. Finally, we demonstrate that, by reversing the sign of the static voltage, it is possible to directly retrieve the absolute THz pulse polarity. The homodyne configuration makes the SSBCD technique of much easier access, leading to a vast range of field-resolved applications

Rare Earth-Activated Silica-Based Nanocomposites

Two different kinds of rare earth-activated glass-based nanocomposite photonic materials, which allow to tailor the spectroscopic properties of rare-earth ions: (i) Er3+-activated SiO2-HfO2 waveguide glass ceramic, and (ii) core-shell-like structures of Er3+-activated silica spheres obtained by a seed growth method, are presented

Well dispersed fractal aggregates as filler in polymer-silica nanocomposites: long range effects in rheology

We are presenting a new method of processing polystyrene-silica nanocomposites, which results in a very well-defined dispersion of small primary aggregates (assembly of 15 nanoparticles of 10 nm diameter) in the matrix. The process is based on a high boiling point solvent, in which the nanoparticles are well dispersed, and controlled evaporation. The filler's fine network structure is determined over a wide range of sizes, using a combination of Small Angle Neutron Scattering (SANS) and Transmission Electronic Microscopy (TEM). The mechanical response of the nanocomposite material is investigated both for small (ARES oscillatory shear and Dynamical Mechanical Analysis) and large deformations (uniaxial traction), as a function of the concentration of the particles. We can investigate the structure-property correlations for the two main reinforcement effects: the filler network contribution, and a filler-polymer matrix effect. Above a silica volume fraction threshold, we see a divergence of the modulus correlated to the build up of a connected network. Below the threshold, we obtain a new additional elastic contribution of much longer terminal time than the matrix. Since aggregates are separated by at least 60 nm, this new filler-matrix contribution cannot be described solely with the concept of glassy layer (2nm)

Development of high-throughput methods to screen disease caused by Rhizoctonia solani AG 2-1 in oilseed rape

Background: Rhizoctonia solani (Kühn) is a soil-borne, necrotrophic fungus causing damping off, root rot and stem canker in many cultivated plants worldwide. Oilseed rape (OSR, Brassica napus) is the primary host for anastomosis group (AG) 2-1 of R. solani causing pre- and post-emergence damping-off resulting in death of seedlings and impaired crop establishment. Presently, there are no known resistant OSR genotypes and the main methods for disease control are fungicide seed treatments and cultural practices. The identification of sources of resistance for crop breeding is essential for sustainable management of the disease. However, a high-throughput, reliable screening method for resistance traits is required. The aim of this work was to develop a low cost, rapid screening method for disease phenotyping and identification of resistance traits. Results: Four growth systems were developed and tested: (1) nutrient media plates, (2) compost trays, (3) light expanded clay aggregate (LECA) trays, and (4) a hydroponic pouch and wick system. Seedlings were inoculated with virulent AG 2-1 to cause damping-off disease and grown for a period of 4–10 days. Visual disease assessments were carried out or disease was estimated through image analysis using ImageJ. Conclusion: Inoculation of LECA was the most suitable method for phenotyping disease caused by R. solani AG 2-1 as it enabled the detection of differences in disease severity among OSR genotypes within a short time period whilst allowing measurements to be conducted on whole plants. This system is expected to facilitate identification of resistant germplasm

പടന്നയിലെ കല്ലുമ്മക്കായ കൃഷിനാശം : കൃഷി വീണ്ടെടുക്കാൻ ചില നിർദേശങ്ങൾ 2016 - 17 ൽ CMFRI നടത്തിയ പഠനറിപ്പോർട്ടിന്റെ പ്രസക്തഭാഗങ്ങൾ

പടന്നയിലെ കല്ലുമ്മക്കായ കൃഷിനാശം : കൃഷി വീണ്ടെടുക്കാൻ ചില നിർദേശങ്ങൾ 2016 - 17 ൽ CMFRI നടത്തിയ പഠനറിപ്പോർട്ടിന്റെ പ്രസക്തഭാഗങ്ങ