44 research outputs found
Structure and giant magnetoresistance of granular Co-Cu nanolayers prepared by cross-beam PLD
A series of Co_xCu_{100-x} (x = 0, 40...75, 100) layers with thicknesses
in-between 13 nm and 55 nm were prepared on silicon substrates using cross-beam
pulsed laser deposition. Wide-angle X-ray diffraction (WAXRD), transmission
electron microscopy (TEM) and electrical transport measurements revealed a
structure consisting of decomposed cobalt and copper grains with grain sizes of
about 10 nm. The influence of cobalt content and layer thickness on the grain
size is discussed. Electron diffraction (ED) indicates the presence of an
intermetallic Co-Cu phase of Cu3Au structure-type. Thermal treatment at
temperatures between 525 K and 750 K results in the progressive decomposition
of Co and Cu, with an increase of the grain sizes up to about 100 nm. This is
tunable by controlling the temperature and duration of the anneal, and is
directly observable in WAXRD patterns and TEM images. A careful analysis of
grain size and the coherence length of the radiation used allows for an
accurate interpretation of the X-ray diffraction patterns, by taking into
account coherent and non-coherent scattering. The alloy films show a giant
magnetoresistance of 1...2.3 % with the maximum obtained after annealing at
around 725 K.Comment: 9 pages, 9 figure
Evidence of near-field laser ablation inductively coupled plasma mass spectrometry (NF-LA-ICP-MS) at nanometre scale for elemental and isotopic analysis on gels and biological samples
Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) has been established as a powerful surface analytical method for local elemental analysis on metallic.. ceramic, geological or biological sample surfaces. Here we show a new way of nanometre scale analysis of elements on sample surfaces by near-field LA-ICP-MS (NF-LA-ICP-MS). This technique uses the near-field enhancement effect on the tip of a thin silver needle in a laser beam (Nd:YAG laser, wavelength 532 nm) on the sample surface. The thin silver needle was etched electrolytically in an electrochemical cell using a droplet of citric acid as electrolyte. For nanolocal analysis by NF-LA-ICP-MS on soft matter (e.g., on 2-D gels and biological samples) a small volume transparent laser ablation chamber was constructed and coupled to a double-focusing sector field inductively coupled plasma mass spectrometer (ICP-MS). A small amount of soft sample material is ablated at atmospheric pressure by a single laser shot in the near-field of the silver tip in the defocused Nd:YAG laser beam. The ablated material is transported with argon as carrier gas into the inductively coupled plasma (ICP) ion source of the sensitive double-focusing sector field mass spectrometer with reverse Nier-Johnson geometry. By single-shot analysis on 2-D gels and biological surfaces doped with uranium in the mu g g(-1) range using NF-LA-ICP-MS all enhancement of ion intensities of transient signals in comparison with the background signal of up to factor 60 was observed. In gels doped with isotopically enriched Cu-65 and Zn-67 spikes by NF-LA-ICP-MS (single shot analysis) ion intensities up to the n x 10(5) cps range and isotope ratios (U-235/U-238, Cu-65/Cu-63 and Zn-67/Zn-64) were measured at a lateral resolution ill the nanometre scale. Using the near-field effect in LA-ICP-MS, it was demonstrated that nanolocal analysis is possible in single-shot measurements of elements oil biological samples and on a eel surface with spatial resolution at the hundreds of nanometres range. This first experiment on near-field LA-ICP-MS opens up a new, challenging path for future applications ill nanoimaging of elements in life science, biology and medicine, e.g., for analyses of single cells, cell organelles or biological structures at nanometre range in order to detect neurodegenerative diseases, but also in material science, nanotechnologies and nanoelectronics
Near-field Laser Ablation Inductively Coupled Plasma Mass Spectrometry (NF-LA-ICP-MS): A possibility for elemental distribution analysis in nanometre scale
Breaking Through in Single Shot Analysis on Biological Sample Surfaces and Gels by Near Field LA-ICP-MS at Nanoscale Range
Human coelomic fluid investigation: A MS-based analytical approach to prenatal screening
Time-resolved and integrated angular distributions of plume ions from silver at low and medium laser fluence
Multi-beam pulsed laser deposition for advanced thin-film optical waveguides
We discuss our progress in the use of multiple laser beams and multiple targets for the pulsed laser deposition of thin films for waveguide laser and magneto-optic applications. In contrast to the more widely used single-beam/single-target geometries, having more than one laser-produced plume can allow tuning of the material properties and complex engineering of the deposited thin films. For optical applications - the majority of the work reported here - dopants can be selectively introduced, lattice mismatch and residual strain can be compensated, which is an important factor for successful growth of thin films of ~ tens of microns thickness, and refractive index values can be adjusted for fabrication of sophisticated waveguiding structures. We discuss mixed, layered, superlattice and Bragg reflector growth, which involve out-of-plane engineering of the film structure, and in-plane engineered geometries for designs relevant to thin-film disc lasing devices. Finally we briefly discuss our most recent use of multi-plume growth for magneto-optic thin films, which involves compositional tuning of final magnetic properties