Biomechanical Analysis of Body Movement During Skiing Over Bumps

Maintenance of balance of the skier's body is one of the most important and basic techniques in skiing on slopes of various conditions. However, skiers, especially beginners are likely to lose their balance on an uneven terrain with dips and swells. In order to keep his balance during skiing on an uneven terrain, it seems to be important for a skier to avoid receiving impulse from the snow surface. Some investigations have been conducted about maintenance of balance of body during skiing over artificially constructed bumps by means of electromyography (Miyashita and Sakurai, 1979), electrogoniometry (Iizuka and Miyashita, 1979) and cinematography (Miyashita and Sakurai, 1979, Iizuka and Miyashita, 1979, Sodeyama et al., 1979 and Ikegami et al. 1985). However, there is no research to try to measure force or acceleration acting on the skier's body during running over bumps. Therefore the purpose of this study is to measure force acting on skier's body by analyzing the movement of skier's body mechanically as well as kinematically, and to find out essential motions to maintain the balance of skier's body against rapid change of force acting from snow surface while skiing over bumps on a straight downhill run

Electrospun nanofiber membranes as ultrathin flexible supercapacitors

A highly flexible electrochemical supercapacitor electrode was developed with a novel metal oxide-reinforced nanofiber electrode by utilizing a solution-based electrospinning technique. The facile fabrication steps involved the introduction of metal precursors into a polymeric solution, which was subjected to an in situ electrospinning process. The electrospun polymeric web with metallic ingredients was then subjected to an oxidative stabilization process that induced the formation of metal oxide nanoparticles within the polymer structure. Finally, the metal oxide nanoparticles incorporated with nanofibers were obtained using a carbonization process, thus converting the polymer backbones into a carbon-rich conductive nanofiber structure. The fabricated nanofibers were decorated and implanted with metal oxide nanoparticles that had a surface-decorated structure morphology due to the solubility of the precursors in the reaction solution. The electrochemical performance of the fabricated metal oxide reinforced with nanofiber electrodes was investigated as an electrochemical system, and the novel morphology significantly improved the specific capacitance compared to a pristine carbon nanofiber membrane. As a result of the uniform dispersion of metal oxide nanoparticles throughout the surface of the nanofibers, the overall capacitive behavior of the membrane was enhanced. Furthermore, a fabricated free-standing flexible device that utilized the optimized nanofiber electrode demonstrated high stability even after it was subjected to various bending operations and curvatures. These promising results showed the potential applications of these lightweight, conductive nanofiber electrodes in flexible and versatile electronic devices

Development of Organo-Dispersible Graphene Oxide via Pseudo-Surface Modification for Thermally Conductive Green Polymer Composites

Graphene has attracted lots of researchers attention because of its remarkable conductivity in both electrically and thermally. However, it has poor dispersibility in organic solvents which limited its applications. Polymers with aromatic end group which act as an intercalator were prepared by ring-opening polymerization with ε-caprolactone by utilizing 1-naphthalene methanol (1-NM) as an initiator. These intercalators will exist between graphene oxide (GO) sheets to prevent aggregation via interactions. The attachment of 1-NM on polymer chains was supported by ultraviolet–visible spectra, size exclusion chromatography profiles, and 1H nuclear magnetic resonance spectra. Exfoliated structured functionalized GO (fGO)/polycaprolactone (PCL) (synthesized fGO) nanocomposites that dispersed well in acetone, chloroform, N,N-dimethylformamide, dimethyl sulfoxide, tetrahydrofuran, and toluene were successfully synthesized. This agreed well with the enlarged interlayer spacing in the optimized fGO as compared to that of GO from density functional theory simulations using the DMol3 module that implemented in the Materials Studio 6.0. Furthermore, its potential to be applied as green electronics in electronics, aerospace, and automotive industries was presented, by trailering the thermal conductivity enhancement from the incorporation of fGO/PCL with commercialized biodegradable polymers, PCL, and poly[(R)-3-hydroxybutyric acid]

Preoperative induction chemotherapy with cisplatin and irinotecan for pathological N2 non-small cell lung cancer

We conducted a phase I/II study to investigate whether the surgical resection after induction chemotherapy with cisplatin and irinotecan was feasible and could improve the treatment outcome for patients with pathological N2 non-small cell lung cancer. Fifteen patients with stage IIIA non-small cell lung cancer having mediastinal lymph node metastases proved by mediastinoscopy were eligible. Both cisplatin (60 mg m−2) and irinotecan (50 mg m−2) were given on days 1 and 8. Patients received two cycles of chemotherapy after 3–4 weeks interval. Induction was followed by surgical resection in 4–6 weeks. Patients who had documented tumour regression after preoperative chemotherapy received two additional cycles of chemotherapy and other patients received radiotherapy postoperatively. After the induction chemotherapy, the objective response rate was 73%. All the 15 patients received surgical resection and complete resection was achieved in 11 (73%) patients. There was no operation-related death and one death due to radiation pneumonitis during postoperative radiotherapy. The median time from entry to final analysis was 46.5 months, ranging from 22 to 68 months. The 5-year survival rate was 40% for all the 15 patients and it was 55% for the 11 patients who underwent complete resection. We conclude that the surgical resection after induction chemotherapy with cisplatin and irinotecan is feasible, and associated with low morbidity and high respectability

Novel, Objective, Multivariate Biomarkers Composed of Plasma Amino Acid Profiles for the Diagnosis and Assessment of Inflammatory Bowel Disease

BACKGROUND: Inflammatory bowel disease (IBD) is a chronic intestinal disorder that is associated with a limited number of clinical biomarkers. In order to facilitate the diagnosis of IBD and assess its disease activity, we investigated the potential of novel multivariate indexes using statistical modeling of plasma amino acid concentrations (aminogram). METHODOLOGY AND PRINCIPAL FINDINGS: We measured fasting plasma aminograms in 387 IBD patients (Crohn's disease (CD), n = 165; ulcerative colitis (UC), n = 222) and 210 healthy controls. Based on Fisher linear classifiers, multivariate indexes were developed from the aminogram in discovery samples (CD, n = 102; UC, n = 102; age and sex-matched healthy controls, n = 102) and internally validated. The indexes were used to discriminate between CD or UC patients and healthy controls, as well as between patients with active disease and those in remission. We assessed index performances using the area under the curve of the receiver operating characteristic (ROC AUC). We observed significant alterations to the plasma aminogram, including histidine and tryptophan. The multivariate indexes established from plasma aminograms were able to distinguish CD or UC patients from healthy controls with ROC AUCs of 0.940 (95% confidence interval (CI): 0.898-0.983) and 0.894 (95%CI: 0.853-0.935), respectively in validation samples (CD, n = 63; UC, n = 120; healthy controls, n = 108). In addition, other indexes appeared to be a measure of disease activity. These indexes distinguished active CD or UC patients from each remission patients with ROC AUCs of 0.894 (95%CI: 0.853-0.935) and 0.849 (95%CI: 0.770-0.928), and correlated with clinical disease activity indexes for CD (r(s) = 0.592, 95%CI: 0.385-0.742, p<0.001) or UC (r(s) = 0.598, 95%CI: 0.452-0.713, p<0.001), respectively. CONCLUSIONS AND SIGNIFICANCE: In this study, we demonstrated that established multivariate indexes composed of plasma amino acid profiles can serve as novel, non-invasive, objective biomarkers for the diagnosis and monitoring of IBD, providing us with new insights into the pathophysiology of the disease

Intersubject and intrasubject variability of potential plasma and urine metabolite and protein biomarkers in healthy human volunteers

A limited understanding of intersubject and intrasubject variability hampers effective biomarker translation from in vitro/in vivo studies to clinical trials and clinical decision support. Specifically, variability of biomolecule concentration can play an important role in interpretation, power analysis, and sampling time designation. In the present study, a wide range of 749 plasma metabolites, 62 urine biogenic amines, and 1,263 plasma proteins were analyzed in 10 healthy male volunteers measured repeatedly during 12 hours under tightly controlled conditions. Three variability components in relative concentration data are determined using linear mixed models: between (intersubject), time (intrasubject), and noise (intrasubject). Biomolecules such as 3-carboxy-4-methyl-5-propyl-2-furanpropanoate, platelet-derived growth factor C, and cathepsin D with low noise potentially detect changing conditions within a person. If also the between component is low, biomolecules can easier differentiate conditions between persons, for example cathepsin D, CD27 antigen, and prolylglycine. Variability over time does not necessarily inhibit translatability, but requires choosing sampling times carefully.Analytical BioScience

Histamine Derived from Probiotic Lactobacillus reuteri Suppresses TNF via Modulation of PKA and ERK Signaling

Beneficial microbes and probiotic species, such as Lactobacillus reuteri, produce biologically active compounds that can modulate host mucosal immunity. Previously, immunomodulatory factors secreted by L. reuteri ATCC PTA 6475 were unknown. A combined metabolomics and bacterial genetics strategy was utilized to identify small compound(s) produced by L. reuteri that were TNF-inhibitory. Hydrophilic interaction liquid chromatography-high performance liquid chromatography (HILIC-HPLC) separation isolated TNF-inhibitory compounds, and HILIC-HPLC fraction composition was determined by NMR and mass spectrometry analyses. Histamine was identified and quantified in TNF-inhibitory HILIC-HPLC fractions. Histamine is produced from L-histidine via histidine decarboxylase by some fermentative bacteria including lactobacilli. Targeted mutagenesis of each gene present in the histidine decarboxylase gene cluster in L. reuteri 6475 demonstrated the involvement of histidine decarboxylase pyruvoyl type A (hdcA), histidine/histamine antiporter (hdcP), and hdcB in production of the TNF-inhibitory factor. The mechanism of TNF inhibition by L. reuteri-derived histamine was investigated using Toll-like receptor 2 (TLR2)-activated human monocytoid cells. Bacterial histamine suppressed TNF production via activation of the H2 receptor. Histamine from L. reuteri 6475 stimulated increased levels of cAMP, which inhibited downstream MEK/ERK MAPK signaling via protein kinase A (PKA) and resulted in suppression of TNF production by transcriptional regulation. In summary, a component of the gut microbiome, L. reuteri, is able to convert a dietary component, L-histidine, into an immunoregulatory signal, histamine, which suppresses pro-inflammatory TNF production. The identification of bacterial bioactive metabolites and their corresponding mechanisms of action with respect to immunomodulation may lead to improved anti-inflammatory strategies for chronic immune-mediated diseases

Electrospun Nanofiber Membranes as Ultrathin Flexible Supercapacitors

A highly flexible electrochemical supercapacitor electrode was developed with a novel metal oxide-reinforced nanofiber electrode by utilizing a solution-based electrospinning technique. The facile fabrication steps involved the introduction of metal precursors into a polymeric solution, which was subjected to an in situ electrospinning process. The electrospun polymeric web with metallic ingredients was then subjected to an oxidative stabilization process that induced the formation of metal oxide nanoparticles within the polymer structure. Finally, the metal oxide nanoparticles incorporated with nanofibers were obtained using a carbonization process, thus converting the polymer backbones into a carbon-rich conductive nanofiber structure. The fabricated nanofibers were decorated and implanted with metal oxide nanoparticles that had a surface-decorated structure morphology due to the solubility of the precursors in the reaction solution. The electrochemical performance of the fabricated metal oxide reinforced with nanofiber electrodes was investigated as an electrochemical system, and the novel morphology significantly improved the specific capacitance compared to a pristine carbon nanofiber membrane. As a result of the uniform dispersion of metal oxide nanoparticles throughout the surface of the nanofibers, the overall capacitive behavior of the membrane was enhanced. Furthermore, a fabricated free-standing flexible device that utilized the optimized nanofiber electrode demonstrated high stability even after it was subjected to various bending operations and curvatures. These promising results showed the potential applications of these lightweight, conductive nanofiber electrodes in flexible and versatile electronic devices