255 research outputs found
Flunisolide Decreases Exhaled Nitric Oxide and Nitrotyrosine Levels in Asthmatic Children
Background. Exhaled nitric oxide (FeNO) has been reported to be elevated in the oxidative stress involved in asthmatic patients, and the reaction of nitric oxide (NO) with superoxide anions results in the formation of nitrotyrosine. The purpose of this study was to investigate the effect of inhaled steroid treatment on nitrotyrosine levels collected by exhaled breath condensate (EBC) and on FeNO. Methods. This was a single-blind placebo-controlled study. The lung function, FeNO, and nitrotyrosine levels were evaluated in 10 asthmatic children. Results. The nitrotyrosine levels were stable during the placebo period (T0 = 1.16 ng/ml versus T1 = 1.05 ng/ml; NS.), whereas they decreased after the treatment with flunisolide (T2 = 1.14 ng/ml versus T3 = 0.88 ng/ml; P < .001). No significant reduction in FeNO levels was observed after placebo treatment (T0 = 38.4 ppb versus T1 = 34.7 ppb, NS.). In contrast, FeNO values decreased significantly being at T3 = 14.9 ppb (T1 versus T3; P = .024). Conclusions. This study shows that corticosteroid treatment reduces nitrotyrosine levels in EBC of asthmatic subjects
Applicability of Confocal Raman Microscopy to Observe Microstructural Modifications of Cream Cheeses as Influenced by Freezing
Confocal Raman microscopy is a promising technique to derive information about microstructure, with minimal sample disruption. Raman emission bands are highly specific to molecular structure and with Raman spectroscopy it is thus possible to observe different classes of molecules in situ, in complex food matrices, without employing fluorescent dyes. In this work confocal Raman microscopy was employed to observe microstructural changes occurring after freezing and thawing in high-moisture cheeses, and the observations were compared to those obtained with confocal laser scanning microscopy. Two commercially available cream cheese products were imaged with both microscopy techniques. The lower resolution (1 µm/pixel) of confocal Raman microscopy prevented the observation of particles smaller than 1 µm that may be part of the structure (e.g., sugars). With confocal Raman microscopy it was possible to identify and map the large water domains formed during freezing and thawing in high-moisture cream cheese. The results were supported also by low resolution NMR analysis. NMR and Raman microscopy are complementary techniques that can be employed to distinguish between the two different commercial formulations, and different destabilization levels
Monitoraggio biologico ed esposizione a silice: applicazione di nuovi indicatori di dose e di effetto
In 16 addetti alla produzione di marmi
ricomposti è stato misurato Si-CAE, è stata eseguita
una spirometria e sono stati dosati 8oxoGua, 8oxoGuo,
8oxodGuo, SP-A, SP-D, CC16 e HO-1. Si sono osservati
valori spirometrici (FVC e FEV1) più bassi nei lavoratori
rispetto ai controlli. Nei lavoratori abbiamo osservato livelli
più elevati dei seguenti marcatori: Si-CAE, 8oxoGuo
ed espressione di HO-1. Lo studio evidenzia che l’esposizione
a silice può aumentare i livelli di Si-CAE, che può essere usato
per stimare la dose al bersaglio. Infine si evidenziavano
aspecifiche alterazioni spirometriche ed un aumento
di biomarcatori d’effetto
In-vivo vascular application via ultra-fast bioprinting for future 5D personalised nanomedicine
The design of 3D complex structures enables new correlation studies between the engineering parameters and the biological activity. Moreover, additive manufacturing technology could revolutionise the personalised medical pre-operative management due to its possibility to interplay with computer tomography. Here we present a method based on rapid freeze prototyping (RFP) 3D printer, reconstruction cutting, nano dry formulation, fast freeze gelation, disinfection and partial processes for the 5D digital models functionalisation. We elaborated the high-resolution computer tomography scan derived from a complex human peripheral artery and we reconstructed the 3D model of the vessel in order to obtain and verify the additive manufacturing processes. Then, based on the drug-eluting balloon selected for the percutaneous intervention, we reconstructed the biocompatible eluting-freeform coating containing 40\u2009nm fluorescent nanoparticles (NPs) by means of RFP printer and we tested the in-vivo feasibility. We introduced the NPs-loaded 5D device in a rat's vena cava. The coating dissolved in a few minutes releasing NPs which were rapidly absorbed in vascular smooth muscle cell (VSMC) and human umbilical vein endothelial cell (HUVEC) in-vitro. We developed 5D high-resolution self-dissolving devices incorporating NPs with the perspective to apply this method to the personalised medicine
Recommended from our members
The PELskin project: part IV—control of bluff body wakes using hairy filaments
The passive control of bluff body wakes using a sparse layer of elastic hairy filaments has been investigated via a series of numerical simulations and compared to selected experiments under well-controlled boundary conditions. It has been found that a distribution of filaments spaced half of the dominant three dimensional instability and resonating with the main shedding frequency can drastically delay the three dimensional transition of the wake behind a circular cylinder. It will also be shown that when using a pair of rows of filaments symmetrically spaced by an azimuthal angle, the wake topology can be deeply affected as well as the value of the integral force coefficients of the cylinder. In the most favourable case, a coupled three dimensional transition delay and strongly reduced values of the drag and of the lift fluctuation can be simultaneously achieved. These results hold also for higher Reynolds-number flows as shown in experiments on a cylinder with hairy flaps attached to the aft part. The lock-in effect of structural vibration of the flaps with the vortex shedding is assumed to be the reason for a sudden change in the shedding cycle as soon as the motion amplitude is high enough to modify the wake. In line with this hypothesis, it has been demonstrated that a long elastic filament pinned on the centerline of a forced spatially developing mixing layer can interact with the vortex dynamics delaying the pairing process-leading to a reduced thickness of the layer. These findings show that a properly designed fluid structure interaction can indeed lead to technological benefits in terms of wake control: drag reduction, vibration control and possibly palliation of aeroacoustic emissions
The food security continuum: a novel tool for understanding food insecurity as a range of experiences
The current lack of consensus on the relationships
between hunger, malnutrition and food insecurity frustrates
efforts to design good policies and programs to deal with the
many problems. Disputes over terminology distract from the
need for urgent action. This paper argues that our understanding
of food insecurity is incremental: it develops as new research
in a variety of food-deprived and nutrition-deprived
contexts reveals causes, experiences and consequences and
how they are interlinked. If we are to improve beneficiary
selection, program targeting and intervention impact assessment,
it is vital to coordinate our new understandings. The
paper brings convergence to our understanding of food insecurity
by introducing a new framework that visualizes levels
of food insecurity, and the concomitant consequences and
responses, as a continuum. Some potential benefits of using
the continuum as a diagnostic tool are increased focus on less
extreme but nevertheless urgent manifestations of food insecurity,
more accurate targeting of interventions and better follow-
up, and improved accountability for donor spending.http://link.springer.com/journal/12571hb201
Tolerability and efficacy of hydrocolloid dressings in the treatment of venous leg ulcers under tropical conditions: an open prospective study
Titanium dioxide nanoparticles promote arrhythmias via a direct interaction with rat cardiac tissue
BackgroundIn light of recent developments in nanotechnologies, interest is growing to better comprehend the interaction of nanoparticles with body tissues, in particular within the cardiovascular system. Attention has recently focused on the link between environmental pollution and cardiovascular diseases. Nanoparticles <50 nm in size are known to pass the alveolar¿pulmonary barrier, enter into bloodstream and induce inflammation, but the direct pathogenic mechanisms still need to be evaluated. We thus focused our attention on titanium dioxide (TiO2) nanoparticles, the most diffuse nanomaterial in polluted environments and one generally considered inert for the human body.MethodsWe conducted functional studies on isolated adult rat cardiomyocytes exposed acutely in vitro to TiO2 and on healthy rats administered a single dose of 2 mg/Kg TiO2 NPs via the trachea. Transmission electron microscopy was used to verify the actual presence of TiO2 nanoparticles within cardiac tissue, toxicological assays were used to assess lipid peroxidation and DNA tissue damage, and an in silico method was used to model the effect on action potential.ResultsVentricular myocytes exposed in vitro to TiO2 had significantly reduced action potential duration, impairment of sarcomere shortening and decreased stability of resting membrane potential. In vivo, a single intra-tracheal administration of saline solution containing TiO2 nanoparticles increased cardiac conduction velocity and tissue excitability, resulting in an enhanced propensity for inducible arrhythmias. Computational modeling of ventricular action potential indicated that a membrane leakage could account for the nanoparticle-induced effects measured on real cardiomyocytes.ConclusionsAcute exposure to TiO2 nanoparticles acutely alters cardiac excitability and increases the likelihood of arrhythmic events
Apparent slip and drag reduction for the flow over superhydrophobic and lubricant-impregnated surfaces
The motion of a liquid above textured surfaces, impregnated with either a gas or a lubricant oil, is considered by homogenizing the microscopic near-wall flow to obtain protrusion heights (or Navier slip lengths), which can then be used in (macroscopic) direct numerical simulations of turbulence. The microstructure of the wall consists in longitudinally aligned ridges; this renders the small-scale Stokes problem amenable to decoupling into two problems, solved by the boundary element method with full account of the deformation of the liquid-lubricant interface, finally yielding two different protrusion heights, a longitudinal and a transverse one, respectively h|| and h. Such heights are then employed in direct numerical simulations of the turbulent flow in a channel bounded by superhydrophobic or lubricant-impregnated walls, demonstrating the reduction in skin-friction drag which can be achieved with the rise in protrusion height difference, \u394h=h||-h. The results are in good agreement with an analytical approximation, provided \u394h+ (\u394h scaled in wall units) remains below 2 and the protrusion heights small in magnitude
- …