104 research outputs found
Investigation of potential extreme load reduction for a two-bladed upwind turbine with partial pitch
This paper presents a wind turbine concept with an innovative design combining partial pitch with a two-bladed (PP-2B) turbine configuration. Special emphasis is on extreme load reduction during storm situations at standstill, but operational loads are also investigated. In order to compare the loads and dynamics of the PP-2B turbine, a partial pitch three-bladed (PP-3B) turbine and a normal pitch regulated three-bladed (3B) turbine are introduced on the basis of solidity similarity scaling. From the dynamic comparisons between two- and three-bladed turbines, it has been observed that the blade vibrations are transferred differently from the rotor to the tower. For a three-bladed turbine, blade vibrations seen in a fixed frame of reference are split with ±1P only. A two-bladed turbine has a similar split of ±1P but also includes contributions on higher harmonics (±2P, ±3P, ... etc.). Further on, frequency split is also seen for the tower vibrations, where an additional ±2P contribution has been observed for the two-bladed turbine. Regarding load comparisons, the PP-2B turbine produces larger tower load variations because of 2P excitation during the operational cases. However, extreme loads are reduced by approximately 20% for the PP-2B and 18% for the PP-3B compared with the 3B turbine for the parked condition in a storm situation. Moreover, a huge potential of 60% is observed for the reduction of the extreme tower bottom bending moment for the PP-2B turbine, when the wind direction is from ±90° to the turbine, but this also requires that the turbine is parked in a T-configuration
Gravitino Dark Matter Scenarios with Massive Metastable Charged Sparticles at the LHC
We investigate the measurement of supersymmetric particle masses at the LHC
in gravitino dark matter (GDM) scenarios where the next-to-lightest
supersymmetric partner (NLSP) is the lighter scalar tau, or stau, and is stable
on the scale of a detector. Such a massive metastable charged sparticle would
have distinctive Time-of-Flight (ToF) and energy-loss () signatures. We
summarise the documented accuracies expected to be achievable with the ATLAS
detector in measurements of the stau mass and its momentum at the LHC. We then
use a fast simulation of an LHC detector to demonstrate techniques for
reconstructing the cascade decays of supersymmetric particles in GDM scenarios,
using a parameterisation of the detector response to staus, taus and jets based
on full simulation results. Supersymmetric pair-production events are selected
with high redundancy and efficiency, and many valuable measurements can be made
starting from stau tracks in the detector. We recalibrate the momenta of taus
using transverse-momentum balance, and use kinematic cuts to select
combinations of staus, taus, jets and leptons that exhibit peaks in invariant
masses that correspond to various heavier sparticle species, with errors often
comparable with the jet energy scale uncertainty.Comment: 23 pages, 10 figures, updated to version published in JHE
A note on the primordial abundance of stau NLSPs
In scenarios with a gravitino LSP, there exist strong BBN constraints on the
abundance of a possible stau NLSP. We find that in settings with substantial
left-right mixing of the stau mass eigenstates these constraints can be evaded
even for very long-lived staus.Comment: 17 pages, 5 figures, discussion on vacuum stability adde
Comparison and Implementation of a Rigid and a Flexible Multibody Planetary Gearbox Model
We propose algorithms for developing (1) a rigid (constrained) and (2) a flexible planetary gearbox model. The two methods are compared against each other and advantages/disadvantages of each method are discussed. The rigid model (1) has gear tooth reaction forces expressed by Lagrange multipliers. The flexible approach (2) is being compared with the gear tooth forces from the rigid approach, first without damping and second the influence of damping is examined. Variable stiffness as a function of base circle arc length is implemented in the flexible approach such that it handles the realistic switch between one and two gear teeth in mesh. The final results are from modelling the planetary gearbox in a 500 kW wind turbine which we also described in Jørgensen et.al (2013)
Disequilibrium, adaptation and the Norse settlement of Greenland
This research was supported by the University of Edinburgh ExEDE Doctoral Training Studentship and NSF grant numbers 1202692 and 1140106.There is increasing evidence to suggest that arctic cultures and ecosystems have followed non-linear responses to climate change. Norse Scandinavian farmers introduced agriculture to sub-arctic Greenland in the late tenth century, creating synanthropic landscapes and utilising seasonally abundant marine and terrestrial resources. Using a niche-construction framework and data from recent survey work, studies of diet, and regional-scale climate proxies we examine the potential mismatch between this imported agricultural niche and the constraints of the environment from the tenth to the fifteenth centuries. We argue that landscape modification conformed the Norse to a Scandinavian style of agriculture throughout settlement, structuring and limiting the efficacy of seasonal hunting strategies. Recent climate data provide evidence of sustained cooling from the mid thirteenth century and climate variation from the early fifteenth century. Archaeological evidence suggests that the Norse made incremental adjustments to the changing sub-arctic environment, but were limited by cultural adaptations made in past environments.Publisher PDFPeer reviewe
High Interstitial Fluid Pressure Is Associated with Tumor-Line Specific Vascular Abnormalities in Human Melanoma Xenografts
PURPOSE: Interstitial fluid pressure (IFP) is highly elevated in many solid tumors. High IFP has been associated with low radiocurability and high metastatic frequency in human melanoma xenografts and with poor survival after radiation therapy in cervical cancer patients. Abnormalities in tumor vascular networks have been identified as an important cause of elevated tumor IFP. The aim of this study was to investigate the relationship between tumor IFP and the functional and morphological properties of tumor vascular networks. MATERIALS AND METHODS: A-07-GFP and R-18-GFP human melanomas growing in dorsal window chambers in BALB/c nu/nu mice were used as preclinical tumor models. Functional and morphological parameters of the vascular network were assessed from first-pass imaging movies and vascular maps recorded after intravenous bolus injection of 155-kDa tetramethylrhodamine isothiocyanate-labeled dextran. IFP was measured in the center of the tumors using a Millar catheter. Angiogenic profiles of A-07-GFP and R-18-GFP cells were obtained with a quantitative PCR array. RESULTS: High IFP was associated with low growth rate and low vascular density in A-07-GFP tumors, and with high growth rate and high vascular density in R-18-GFP tumors. A-07-GFP tumors showed chaotic and highly disorganized vascular networks, while R-18-GFP tumors showed more organized vascular networks with supplying arterioles in the tumor center and draining venules in the tumor periphery. Furthermore, A-07-GFP and R-18-GFP cells differed substantially in angiogenic profiles. A-07-GFP tumors with high IFP showed high geometric resistance to blood flow due to high vessel tortuosity. R-18-GFP tumors with high IFP showed high geometric resistance to blood flow due to a large number of narrow tumor capillaries. CONCLUSIONS: High IFP in A-07-GFP and R-18-GFP human melanoma xenografts was primarily a consequence of high blood flow resistance caused by tumor-line specific vascular abnormalities
A Fast Panel Code for Complex Actuator Disk Flows
A fast, linear scaling vortex method is presented to study inviscid incompressible flow problems involving one or more actuator disks. Building upon previous efforts that were limited to axi-symmetric flow cases, the proposed methodology is able to handle arbitrary configurations with no symmetry constraints. Applications include the conceptual study of wake interaction mechanisms in wind farms, and the correction of wind tunnel blockage effects in test sections of arbitrary shape. Actuator disks represent wind turbines through the shedding of a deformable vortex wake, discretized with a plaid of triangular distributed dipole singularities. An iterative method is adopted to align the wake with the local flow field, which is reconstructed from the vorticity field with a Green function approach. Interactions are computed with a Fast Multipole Method (FMM), effectively overcoming the quadratic scaling of computational time associated with traditional panel methods. When compared to direct computation, the use of an FMM algorithm reduced solution time by a factor 30 when studying the wake of a single actuator disk with 60000 panels. In the same case, the mass flux of the actuator streamtube was conserved to 0:002%. Finally, the presence of round and square impermeable walls around the actuator is considered to demonstrate the code applicability to wind tunnel wall interference correction problems
Ionic liquids at electrified interfaces
Until recently, “room-temperature” (<100–150 °C) liquid-state electrochemistry was mostly electrochemistry of diluted electrolytes(1)–(4) where dissolved salt ions were surrounded by a considerable amount of solvent molecules. Highly concentrated liquid electrolytes were mostly considered in the narrow (albeit important) niche of high-temperature electrochemistry of molten inorganic salts(5-9) and in the even narrower niche of “first-generation” room temperature ionic liquids, RTILs (such as chloro-aluminates and alkylammonium nitrates).(10-14) The situation has changed dramatically in the 2000s after the discovery of new moisture- and temperature-stable RTILs.(15, 16) These days, the “later generation” RTILs attracted wide attention within the electrochemical community.(17-31) Indeed, RTILs, as a class of compounds, possess a unique combination of properties (high charge density, electrochemical stability, low/negligible volatility, tunable polarity, etc.) that make them very attractive substances from fundamental and application points of view.(32-38) Most importantly, they can mix with each other in “cocktails” of one’s choice to acquire the desired properties (e.g., wider temperature range of the liquid phase(39, 40)) and can serve as almost “universal” solvents.(37, 41, 42) It is worth noting here one of the advantages of RTILs as compared to their high-temperature molten salt (HTMS)(43) “sister-systems”.(44) In RTILs the dissolved molecules are not imbedded in a harsh high temperature environment which could be destructive for many classes of fragile (organic) molecules
- …