Development of a low-cost Arduino-based potentiostat

A simple Arduino-based potentiostat has been developed. This potentiostat design is cost effective for low budget applications and educational purposes. The resolution and linear response of the developed potentiosat was evaluated. A cyclic voltammetry of potassium ferricyanide K3[Fe(CN)6] was performed to compare the potentiostat electrochemical performance with a commercial one. To show the portable potentiostat capabilities, cyclic voltammograms were also performed at different scan rates. Finally, the diffusion coefficient of potassium ferricyanide was calculated in a solution containing a known concentration of the salt using the Randles-Sevcik equationMechanical Engineerin

Structural Artifacts and Advantages of Cytocentrifugation of Cells as Viewed by Scanning Electron Microscopy

Cytocentrifugation of cell suspensions onto glass slides is a widely used procedure in contemporary cytology. We employed here scanning electron microscopy (SEM) to investigate putative morphological changes induced in cells submitted to cytocentrifugation. The fine structure of murine pleural exudate cells (macrophages mainly) processed by spinning was compared with that of similar cells treated without centrifugation (poly-L-lysine attachment of the cells to glass slides at 1 g). Cells of cytocentrifuged preparations showed a significant increase in diameter and smoothening of the cell surface as compared with the morphology of non-centrifuged cells. Cytocentrifugation also induced the formation of thin elongations coming out of the cellular outlines. The centrifugation-induced flattening of the pleural macrophages improved the detection of large intracellular inclusions (containing tungsten particles): these bodies were readily identified by secondary-electron imaging mode of SEM in cytospinned cells whereas their detection in non-centrifuged spherical cells required the use of the backscattered-electron imaging mode of SEM. We conclude that the cytocentrifugation methodology, on one hand, requires caution on the interpretation of the microanatomy of the cells and, on the other hand, the procedure may be an adequate method to improve the identification of large intracellular inclusions by routine (secondary-electron imaging mode) SEM

Fast prototyping microfluidics: Integrating droplet digital lamp for absolute quantification of cancer biomarkers

UID/CTM/50025/2019 UID/Multi/04378/2019 Inn-INDIGO/0002/2015 PTDC/BTM-SAL/31201/2017 SFRH/BPD/124311/2016Microfluidic (MF) advancements have been leveraged toward the development of state-of-the-art platforms for molecular diagnostics, where isothermal amplification schemes allow for further simplification of DNA detection and quantification protocols. The MF integration with loop-mediated isothermal amplification (LAMP) is today the focus of a new generation of chip-based devices for molecular detection, aiming at fast and automated nucleic acid analysis. Here, we combined MF with droplet digital LAMP (ddLAMP) on an all-in-one device that allows for droplet generation, target amplification, and absolute quantification. This multilayer 3D chip was developed in less than 30 minutes by using a low-cost and extremely adaptable production process that exploits direct laser writing technology in “Shrinky-dinks” polystyrene sheets. ddLAMP and target quantification were performed directly on-chip, showing a high correlation between target concentration and positive droplet score. We validated this integrated chip via the amplification of targets ranging from five to 500,000 copies/reaction. Furthermore, on-chip amplification was performed in a 10 µL volume, attaining a limit of detection of five copies/µL under 60 min. This technology was applied to quantify a cancer biomarker, c-MYC, but it can be further extended to any other disease biomarker.publishersversionpublishe

Highly conductive p-type nanocrystalline silicon films deposited by RF-PECVD using silane and trimethylboron mixtures at high pressure

In this paper we present a study of boron-doped nc-Si:H films prepared by PECVD at high depositionpressure (>4 mbar), high plasma power and low substrate temperature (7 (U cm)1) andhigh optical band gap (>1.7 eV). Modeling of ellipsometry spectra reveals that the film growth mechanismshould proceed through a sub-surface layer mechanism that leads to silicon crystallization.The obtained films are very good candidates for application in amorphous and nanocrystalline siliconsolar cells as a p-type window layer.Peer reviewe

Arrest in ciliated cell expansion on the bronchial lining of adult rats caused by chronic exposure to industrial noise

Workers chronically exposed to high-intensity/low-frequency noise at textile plants show increased frequency of respiratory infections. This phenomenon prompted the herein investigation on the cytology of the bronchial epithelium of Wistar rats submitted to textile noise. Workplace noise from a cotton-mill room of a textile factory was recorded and reproduced in a sound-insulated animal room. The Wistar rats were submitted to a weekly schedule of noise treatment that was similar to that of the textile workers (8 h/day, 5 days/week). Scanning electron microscopy (SEM) was used to compare the fine morphology of the inner surface of the bronchi in noise-exposed and control rats. SEM quantitative cytology revealed that exposure to noise for 5-7 months caused inhibition in the natural expansion of the area occupied by ciliated cells on the bronchial epithelium as adult rats grow older. This difference between noise-exposed and age-matched control rats was statistically significant (P<0.05) and documents that the cytology of the rat bronchial epithelium is mildly altered by noise exposure. The decrease in the area of bronchial cilia may impair the mucociliar clearance of the respiratory airways and, thus, increase vulnerability to respiratory infection

TOWARDS THE IMPROVEMENT OF THE STABILITY OF A-SI:H PIN DEVICES

Abstract -This paper deals with a new process aiming to improve the stability of a-Si:H pin solar cells deposited on a single batch process, by proper passivation of the interfaces. The process consists in partially removing a deposited sacrificial oxide layer grown between the p/i and/or i/n interfaces by proper SF 6 etching. This layer is an absorber of defects and impurities that are introduced in the interfaces, mainly from the chamber walls and the substrate surface. The results achieved in laboratory samples lead to devices in which the fill factor and short circuit current density were improved respectively towards 75% and 16.5 mAcm -2 , with a final working efficiency of about 9.5%

Mortars from the palace of Knossos in Crete, Greece: A multi-analytical approach

The study of building materials constituting cultural heritage is fundamental to understand their characteristics and predict their behavior. When considering materials from archaeological sites, their characterization can provide not only relevant information for a broader understanding of the site and its importance and significance but can also increase knowledge about ancient materials and their performance. The Palace of Knossos is a very important archaeological site in the European history context, and its preservation benefits from the characterization of the constituent materials. Samples of mortars from this monument were collected under the scope of the H2020 HERACLES project, where a multi-analytical approach was chosen using established protocols for the different sample typologies. Instrumental techniques such as optical microscopy (OM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and simultaneous thermogravimetry and differential thermal analysis (TG–DTA) were used for the chemical, mineralogical, and morphological characterization of these mortar samples. The results indicate that the majority are lime mortars, both aerial and hydraulic, but gypsum-based mortars were also identified. Differences in the chemical composition of the samples in distinct areas of the monument allowed us to reflect on the variety of materials used in the construction of the Palace of Knossos.publishersversionpublishe

OCT in Alzheimer's Disease: Thinning of the RNFL and Superior Hemiretina

BACKGROUND: Peripapillary retinal nerve fiber layer (pRNFL) and internal macular layer thinning have been demonstrated in Alzheimer's disease (AD) with optical coherence tomography (OCT) studies. The purpose of this study is to compare the pRNFL thickness and overall retinal thickness (RT) in AD patients with non-AD patients, using spectral domain optical coherence tomography (SD-OCT) and determine the sectors most characteristically affected in AD. METHODS: A cross-sectional study was performed to determine the pRNFL and overall macular RT thicknesses in AD and non-AD patients, attending a tertiary hospital center. For pRNFL, the global and six peripapillary quadrants were calculated, and for overall RT values, the nine Early Treatment Diabetic Retinopathy Study (ETDRS) areas were used. A multiple regression analysis was applied to assess the effects of disease, age, gender, spherical equivalent, visual acuity, intraocular pressure, axial length and blood pressure on pRNFL and overall macular RT. RESULTS: A total of 202 subjects, including 50 eyes of 50 patients with mild AD (mean age 73.10; SD = 5.36 years) and 152 eyes of 152 patients without AD (mean age 71.03; SD = 4.62 years). After Bonferroni correction, the pRNFL was significantly thinner for the AD group globally and in the temporal superior quadrant (10.76 μm and 20.09 μm mean decrease, respectively). The RT thickness was also decreased in superior sectors S3 and S6 (mean thinning of 9.92 μm and 11.65 μm, respectively). Spearman's correlation coefficient showed a direct association between pRNFL in the temporal superior quadrant and RT in superior S6 and S3 sectors (rS = 0.41; p < 0.001 and rS = 0.28; p < 0.001, respectively). CONCLUSIONS: Patients with AD showed a significant thickness reduction in global and temporal superior quadrants in pRNFL and in superior pericentral and peripheral sectors of RT. These findings may reflect a peripapillary and retinal changes characteristic of AD, suggesting the importance of SD-OCT as a potential adjuvant in early diagnosis of AD. Further studies are needed to understand which retinal layers and macular sectors are more useful as potential ocular biomarker over time in AD.info:eu-repo/semantics/publishedVersio

Infrasound induces coronary perivascular fibrosis in rats

Background: Chronic exposure to industrial noise is known to affect biological systems, namely, by inducing fibrosis in the absence of inflammatory cells. In rat hearts exposed to this environmental hazard, we have previously found myocardial and perivascular fibrosis. The acoustic spectrum of industrial environments is particularly rich in high-intensity infrasound (<20 Hz), whose effects on the heart are unknown. We evaluated the morphological changes induced by IFS in rat coronaries in the presence and absence of dexamethasone. Methods: Adult Wistar rats were divided into three groups: group A (GA)-IFS (<20 Hz, 120 dB)-exposed rats for 28 days treated with dexamethasone; group B (GB)-IFS-exposed rats; group C (GC)-age-matched controls. The midventricle was prepared for observation with an optical microscope using 100x magnification. Thirty-one arterial vessels were selected (GA 8, GB 10, GC 13). The vessel caliber, thickness of the wall, and perivascular dimensions were quantified using image j software. Mann-Whitney and Kruskal-Wallis tests were used to compare the groups for lumen-to-vessel wall (LW) and vessel wall-to-perivascular tissue (W/P) ratios. Results: IFS-exposed rats exhibited a prominent perivascular tissue. The median L/W and median W/P ratios were 0.54 and 0.48, 0.66 and 0.49, and 0.71 and 0.68, respectively, in GA, GB, and GC. The W/P ratio was significantly higher in GC compared with IFS-exposed animals (P=.001). The difference was significant between GC and GB (P=.008) but not between GC and GA. Conclusion: IFS induces coronary perivascular fibrosis that differs under treatment with corticosteroid

Comparação de modelagem espacial na cultura do citros

Citrus is one of the most important activities in the northwest of São Paulo, demanding high investments and the use of irrigation has been increasing as a requirement for the viability of the activity, the need for high productivity in the region with the highest rates of evapotranspiration and water deficit of the state. The objective of this project was to determine the actual evapotranspiration of citrus and the crop coefficients in the different phenological stages under rainfall conditions and different irrigation systems, using combined techniques of remote sensing and climatic variables obtained from meteorological stations applying and validating SAFER and the FAO 56 on a large scale. The SAFER estimated harvest values were lower than those suggested by the FAO, which stimulates more research on the subject, considering that it is the first study to estimate the use of water by citrus in the northwest region of São Paulo, which combines information collected in the soil (agrometeorological stations) with orbital satellite images.O citros é uma das atividades mais importantes no noroeste de São Paulo, exigindo altos investimentos e o uso da irrigação vem aumentando como requisito para a viabilidade da atividade, necessidade de alta produtividade na região com as maiores taxas de evapotranspiração e déficit hídrico do estado. O objetivo deste projeto foi determinar a evapotranspiração real de citros e os coeficientes de cultura nos diferentes estádios fenológicos sob condições de chuva e diferentes sistemas de irrigação, fazendo uso combinado de técnicas de sensoriamento remoto e variáveis climáticas obtidas de estações meteorológicas aplicando e validando o SAFER e o FAO 56 em grande escala. O coeficiente de safra estimado pelo SAFER apresentou valores menores do que aqueles sugeridos pela FAO, o que estimula mais pesquisas sobre o assunto, considerando que é o primeiro estudo a estimar o uso de água por citros na região noroeste de São Paulo, que combina informações coletadas no solo (estações agrometeorológicas) com imagens de satélite orbitais