An Experimental Platform for Multi-spacecraft Phase-Array Communications

The emergence of small satellites and CubeSats for interplanetary exploration will mean hundreds if not thousands of spacecraft exploring every corner of the solar-system. Current methods for communication and tracking of deep space probes use ground based systems such as the Deep Space Network (DSN). However, the increased communication demand will require radically new methods to ease communication congestion. Networks of communication relay satellites located at strategic locations such as geostationary orbit and Lagrange points are potential solutions. Instead of one large communication relay satellite, we could have scores of small satellites that utilize phase arrays to effectively operate as one large satellite. Excess payload capacity on rockets can be used to warehouse more small satellites in the communication network. The advantage of this network is that even if one or a few of the satellites are damaged or destroyed, the network still operates but with degraded performance. The satellite network would operate in a distributed architecture and some satellites maybe dynamically repurposed to split and communicate with multiple targets at once. The potential for this alternate communication architecture is significant, but this requires development of satellite formation flying and networking technologies. Our research has found neural-network control approaches such as the Artificial Neural Tissue can be effectively used to control multirobot/multi-spacecraft systems and can produce human competitive controllers. We have been developing a laboratory experiment platform called Athena to develop critical spacecraft control algorithms and cognitive communication methods. We briefly report on the development of the platform and our plans to gain insight into communication phase arrays for space.Comment: 4 pages, 10 figures, IEEE Cognitive Communications for Aerospace Applications Worksho

A robot swarm assisting a human fire-fighter

Emergencies in industrial warehouses are a major concern for fire-fighters. The large dimensions, together with the development of dense smoke that drastically reduces visibility, represent major challenges. The GUARDIANS robot swarm is designed to assist fire-fighters in searching a large warehouse. In this paper we discuss the technology developed for a swarm of robots assisting fire-fighters. We explain the swarming algorithms that provide the functionality by which the robots react to and follow humans while no communication is required. Next we discuss the wireless communication system, which is a so-called mobile ad-hoc network. The communication network provides also the means to locate the robots and humans. Thus, the robot swarm is able to provide guidance information to the humans. Together with the fire-fighters we explored how the robot swarm should feed information back to the human fire-fighter. We have designed and experimented with interfaces for presenting swarm-based information to human beings

GUARDIANS final report

Emergencies in industrial warehouses are a major concern for firefghters. The large dimensions together with the development of dense smoke that drastically reduces visibility, represent major challenges. The Guardians robot swarm is designed to assist fire fighters in searching a large warehouse. In this report we discuss the technology developed for a swarm of robots searching and assisting fire fighters. We explain the swarming algorithms which provide the functionality by which the robots react to and follow humans while no communication is required. Next we discuss the wireless communication system, which is a so-called mobile ad-hoc network. The communication network provides also one of the means to locate the robots and humans. Thus the robot swarm is able to locate itself and provide guidance information to the humans. Together with the re ghters we explored how the robot swarm should feed information back to the human fire fighter. We have designed and experimented with interfaces for presenting swarm based information to human beings

3D printed neuromorphic sensing systems

Thanks to the high energy efficiency, neuromorphic devices are spotlighted recently by mimicking the calculation principle of the human brain through the parallel computation and the memory function. Various bio-inspired \u27in-memory computing\u27 (IMC) devices were developed during the past decades, such as synaptic transistors for artificial synapses. By integrating with specific sensors, neuromorphic sensing systems are achievable with the bio-inspired signal perception function. A signal perception process is possible by a combination of stimuli sensing, signal conversion/transmission, and signal processing. However, most neuromorphic sensing systems were demonstrated without signal conversion/transmission functions. Therefore, those cannot fully mimic the function provides by the sensory neuron in the biological system. This thesis aims to design a neuromorphic sensing system with a complete function as biological sensory neurons. To reach such a target, 3D printed sensors, electrical oscillators, and synaptic transistors were developed as functions of artificial receptors, artificial neurons, and artificial synapses, respectively. Moreover, since the 3D printing technology has demonstrated a facile process due to fast prototyping, the proposed 3D neuromorphic sensing system was designed as a 3D integrated structure and fabricated by 3D printing technologies. A novel multi-axis robot 3D printing system was also utilized to increase the fabrication efficiency with the capability of printing on vertical and tilted surfaces seamlessly. Furthermore, the developed 3D neuromorphic system was easily adapted to the application of tactile sensing. A portable neuromorphic system was integrated with a tactile sensing system for the intelligent tactile sensing application of the humanoid robot. Finally, the bio-inspired reflex arc for the unconscious response was also demonstrated by training the neuromorphic tactile sensing system

GUARDIANS final report part 1 (draft): a robot swarm assisting a human fire fighter

Emergencies in industrial warehouses are a major concern for fire fighters. The large dimensions together with the development of dense smoke that drastically reduces visibility, represent major challenges. The Guardians robot swarm is designed to assist re ghters in searching a large warehouse. In this paper we discuss the technology developed for a swarm of robots assisting re ghters. We explain the swarming algorithms which provide the functionality by which the robots react to and follow humans while no communication is required. Next we discuss the wireless communication system, which is a so-called mobile ad-hoc network. The communication network provides also the means to locate the robots and humans. Thus the robot swarm is able to provide guidance information to the humans. Together with the fire fighters we explored how the robot swarm should feed information back to the human fire fighter. We have designed and experimented with interfaces for presenting swarm based information to human beings

TinyTerp: A FULLY AUTONOMOUS MOBILE SMART CENTI-ROBOT

A fully autonomous modular 8 cm3 robot is presented using commercially available off-the-shelf (COTS) components. The robot introduced is called Tiny Terrestrial Robotic Platform (TinyTeRP) which provides an inexpensive, easily assembled, small robotic platform for researchers to study swarm behavior. TinyTeRP can be assembled in 30 minutes and costs $51.50. TinyTeRP is fully autonomous, with approximately 10 minutes of run time, and the ability to travel over 20 cm/s with DC motors and wheels. Communication to other TinyTeRP robots and stationary sensors is performed using a 2.4 GHz IEEE 802.15.4 radio. TinyTeRP has the ability to interface with additional sensors modules and locomotion actuators, including a wheeled locomotion and inertial measurement unit (IMU) module. An additional legged platform module that uses thermally actuated polymer legs with a silver composite acrylic is discussed. Finally, TinyTeRP demonstrates the use of two control algorithms to interact with a fixed beacon using received signal strength indicator (RSSI)

Tutorial: A Versatile Bio-Inspired System for Processing and Transmission of Muscular Information

Device wearability and operating time are trending topics in recent state-of-art works on surface ElectroMyoGraphic (sEMG) muscle monitoring. No optimal trade-off, able to concurrently address several problems of the acquisition system like robustness, miniaturization, versatility, and power efficiency, has yet been found. In this tutorial we present a solution to most of these issues, embedding in a single device both an sEMG acquisition channel, with our custom event-driven hardware feature extraction technique (named Average Threshold Crossing), and a digital part, which includes a microcontroller unit, for (optionally) sEMG sampling and processing, and a Bluetooth communication, for wireless data transmission. The knowledge acquired by the research group brought to an accurate selection of each single component, resulting in a very efficient prototype, with a comfortable final size (57.8mm x 25.2mm x 22.1mm) and a consistent signal-to-noise ratio of the acquired sEMG (higher than 15 dB). Furthermore, a precise design of the firmware has been performed, handling both signal acquisition and Bluetooth transmission concurrently, thanks to a FreeRTOS custom implementation. In particular, the system adapts to both sEMG and ATC transmission, with an application throughput up to 2 kB s-1 and an average operating time of 80 h (for high resolution sEMG sampling), relaxable to 8Bs-1 throughput and about 230 h operating time (considering a 110mAh battery), in case of ATC acquisition only. Here we share our experience over the years in designing wearable systems for the sEMG detection, specifying in detail how our event-driven approach could benefit the device development phases. Some previous basic knowledge about biosignal acquisition, electronic circuits and programming would certainly ease the repeatability of this tutorial

Collective gas sensing in a cyber-physical system

This paper discusses a novel collective sensing approach using autonomous sensors specially designed to monitor gas leaks and search for gas sources. The proposed collective behavior aims to improve the gas-source search by sharing information between mobile sensors and reducing the risks associated with gas leakage. The group acts as a composite sensor that can move independently to search for an optimal sensing zone. The autonomous searching behavior is bio-inspired by colonies of bacteria that continuously seek energy sources throughout their existence. Each sensor makes its own autonomous search decision, considering the group sense, to move in the direction of a better energy source. The collective approach is based on autonomous agents sharing information to achieve a collective sense of gas perception and utilizes more intelligent searching. The method is evaluated in a cyber-physical system specially developed to safely experiment with gases and mobile sensors while reproducing the realistic dynamic behavior of the gas. Experiments are performed to clarify the collective gas-sensing contributions, and the gas search is compared through multiple mobile sensors with and without collective sensing. The proposed approach is evaluated in an unhealthy environment to elucidate its effectiveness. In addition to presenting the related differences between collective and individual sensory approaches, this work contributes with analyzes of the scalability of mobile gas sensing systems. This work also contributed as a simulated semi-physical experimental system to test algorithms' performance before applying it to practice. © 2001-2012 IEEEinfo:eu-repo/semantics/publishedVersio