1,773 research outputs found
Localization in Long-range Ultra Narrow Band IoT Networks using RSSI
Internet of things wireless networking with long range, low power and low
throughput is raising as a new paradigm enabling to connect trillions of
devices efficiently. In such networks with low power and bandwidth devices,
localization becomes more challenging. In this work we take a closer look at
the underlying aspects of received signal strength indicator (RSSI) based
localization in UNB long-range IoT networks such as Sigfox. Firstly, the RSSI
has been used for fingerprinting localization where RSSI measurements of GPS
anchor nodes have been used as landmarks to classify other nodes into one of
the GPS nodes classes. Through measurements we show that a location
classification accuracy of 100% is achieved when the classes of nodes are
isolated. When classes are approaching each other, our measurements show that
we can still achieve an accuracy of 85%. Furthermore, when the density of the
GPS nodes is increasing, we can rely on peer-to-peer triangulation and thus
improve the possibility of localizing nodes with an error less than 20m from
20% to more than 60% of the nodes in our measurement scenario. 90% of the nodes
is localized with an error of less than 50m in our experiment with
non-optimized anchor node locations.Comment: Accepted in ICC 17. To be presented in IEEE International Conference
on Communications (ICC), Paris, France, 201
Enhanced indoor location tracking through body shadowing compensation
This paper presents a radio frequency (RF)-based location tracking system that improves its performance by eliminating the shadowing caused by the human body of the user being tracked. The presence of such a user will influence the RF signal paths between a body-worn node and the receiving nodes. This influence will vary with the user's location and orientation and, as a result, will deteriorate the performance regarding location tracking. By using multiple mobile nodes, placed on different parts of a human body, we exploit the fact that the combination of multiple measured signal strengths will show less variation caused by the user's body. Another method is to compensate explicitly for the influence of the body by using the user's orientation toward the fixed infrastructure nodes. Both approaches can be independently combined and reduce the influence caused by body shadowing, hereby improving the tracking accuracy. The overall system performance is extensively verified on a building-wide testbed for sensor experiments. The results show a significant improvement in tracking accuracy. The total improvement in mean accuracy is 38.1% when using three mobile nodes instead of one and simultaneously compensating for the user's orientation
Recurrent Neural Networks For Accurate RSSI Indoor Localization
This paper proposes recurrent neuron networks (RNNs) for a fingerprinting
indoor localization using WiFi. Instead of locating user's position one at a
time as in the cases of conventional algorithms, our RNN solution aims at
trajectory positioning and takes into account the relation among the received
signal strength indicator (RSSI) measurements in a trajectory. Furthermore, a
weighted average filter is proposed for both input RSSI data and sequential
output locations to enhance the accuracy among the temporal fluctuations of
RSSI. The results using different types of RNN including vanilla RNN, long
short-term memory (LSTM), gated recurrent unit (GRU) and bidirectional LSTM
(BiLSTM) are presented. On-site experiments demonstrate that the proposed
structure achieves an average localization error of m with of the
errors under m, which outperforms the conventional KNN algorithms and
probabilistic algorithms by approximately under the same test
environment.Comment: Received signal strength indicator (RSSI), WiFi indoor localization,
recurrent neuron network (RNN), long shortterm memory (LSTM),
fingerprint-based localizatio
Advanced real-time indoor tracking based on the Viterbi algorithm and semantic data
A real-time indoor tracking system based on the Viterbi algorithm is developed. This Viterbi principle is used in combination with semantic data to improve the accuracy, that is, the environment of the object that is being tracked and a motion model. The starting point is a fingerprinting technique for which an advanced network planner is used to automatically construct the radio map, avoiding a time consuming measurement campaign. The developed algorithm was verified with simulations and with experiments in a building-wide testbed for sensor experiments, where a median accuracy below 2 m was obtained. Compared to a reference algorithm without Viterbi or semantic data, the results indicated a significant improvement: the mean accuracy and standard deviation improved by, respectively, 26.1% and 65.3%. Thereafter a sensitivity analysis was conducted to estimate the influence of node density, grid size, memory usage, and semantic data on the performance
Indoor Positioning for Monitoring Older Adults at Home: Wi-Fi and BLE Technologies in Real Scenarios
This paper presents our experience on a real case of applying an indoor localization system formonitoringolderadultsintheirownhomes. Sincethesystemisdesignedtobeusedbyrealusers, therearemanysituationsthatcannotbecontrolledbysystemdevelopersandcanbeasourceoferrors. This paper presents some of the problems that arise when real non-expert users use localization systems and discusses some strategies to deal with such situations. Two technologies were tested to provide indoor localization: Wi-Fi and Bluetooth Low Energy. The results shown in the paper suggest that the Bluetooth Low Energy based one is preferable in the proposed task
Position Estimation of Robotic Mobile Nodes in Wireless Testbed using GENI
We present a low complexity experimental RF-based indoor localization system
based on the collection and processing of WiFi RSSI signals and processing
using a RSS-based multi-lateration algorithm to determine a robotic mobile
node's location. We use a real indoor wireless testbed called w-iLab.t that is
deployed in Zwijnaarde, Ghent, Belgium. One of the unique attributes of this
testbed is that it provides tools and interfaces using Global Environment for
Network Innovations (GENI) project to easily create reproducible wireless
network experiments in a controlled environment. We provide a low complexity
algorithm to estimate the location of the mobile robots in the indoor
environment. In addition, we provide a comparison between some of our collected
measurements with their corresponding location estimation and the actual robot
location. The comparison shows an accuracy between 0.65 and 5 meters.Comment: (c) 2016 IEEE. Personal use of this material is permitted. Permission
from IEEE must be obtained for all other uses, in any current or future
media, including reprinting/republishing this material for advertising or
promotional purposes, creating new collective works, for resale or
redistribution to servers or lists, or reuse of any copyrighted component of
this work in other work
- …