A Digital Triplet for Utilizing Offline Environments to Train Condition Monitoring Systems for Rolling Element Bearings

Manufacturing competitiveness is related to making a quality product while incurring the lowest costs. Unexpected downtime caused by equipment failure negatively impacts manufacturing competitiveness due to the ensuing defects and delays caused by the downtime. Manufacturers have adopted condition monitoring (CM) techniques to reduce unexpected downtime to augment maintenance strategies. The CM adoption has transitioned maintenance from Breakdown Maintenance (BM) to Condition-Based Maintenance (CbM) to anticipate impending failures and provide maintenance actions before equipment failure. CbM is the umbrella term for maintenance strategies that use condition monitoring techniques such as Preventive Maintenance (PM) and Predictive Maintenance (PdM). Preventive Maintenance involves providing periodic checks based on either time or sensory input. Predictive Maintenance utilizes continuous or periodic sensory inputs to determine the machine health state to predict the equipment failure. The overall goal of the work is to improve bearing diagnostic and prognostic predictions for equipment health by utilizing surrogate systems to generate failure data that represents production equipment failure, thereby providing training data for condition monitoring solutions without waiting for real world failure data. This research seeks to address the challenges of obtaining failure data for CM systems by incorporating a third system into monitoring strategies to create a Digital Triplet (DTr) for condition monitoring to increase the amount of possible data for condition monitoring. Bearings are a critical component in rotational manufacturing systems with wide application to other industries outside of manufacturing, such as energy and defense. The reinvented DTr system considers three components: the physical, surrogate, and digital systems. The physical system represents the real-world application in production that cannot fail. The surrogate system represents a physical component in a test system in an offline environment where data is generated to fill in gaps from data unavailable in the real-world system. The digital system is the CM system, which provides maintenance recommendations based on the ingested data from the real world and surrogate systems. In pursuing the research goal, a comprehensive bearing dataset detailing these four failure modes over different collection operating parameters was created. Subsequently, the collections occurred under different operating conditions, such as speed-varying, load-varying, and steadystate. Different frequency and time measures were used to analyze and identify differentiating criteria between the different failure classes over the differing operating conditions. These empirical observations were recreated using simulations to filter out potential outliers. The outputs of the physical model were combined with knowledge from the empirical observations to create ”spectral deltas” to augment existing bearing data and create new failure data that resemble similar frequency criteria to the original data. The primary verification occurred on a laboratory-bearing test stand. A conjecture is provided on how to scale to a larger system by analyzing a larger system from a local manufacturer. From the subsequent analysis of machine learning diagnosis and prognosis models, the original and augmented bearing data can complement each other during model training. The subsequent data substitution verifies that bearing data collected under different operating conditions and sizes can be substituted between different systems. Ostensibly, the full formulation of the digital triplet system is that bearing data generated at a smaller size can be scaled to train predictive failure models for larger bearing sizes. Future work should consider implementing this method for other systems outside of bearings, such as gears, non-rotational equipment, such as pumps, or even larger complex systems, such as computer numerically controlled machine tools or car engines. In addition, the method and process should not be restricted to only mechanical systems and could be applied to electrical systems, such as batteries. Furthermore, an investigation should consider further data-driven approximations to specific bearing characteristics related to the stiffness and damping parameters needed in modeling. A final consideration is for further investigation into the scalability quantities within the data and how to track these changes through different system levels

Aeronautical engineering: A continuing bibliography with indexes (supplement 233)

This bibliography lists 637 reports, articles, and other documents introduced into the NASA scientific and technical information system in November, 1988. Subject coverage includes: design, construction and testing of aircraft and aircraft engines; aircraft components, equipment and systems; ground support systems; and theoretical and applied aspects of aerodynamics and general fluid dynamics

Aeronautical engineering: A continuing bibliography with indexes (supplement 276)

This bibliography lists 705 reports, articles, and other documents introduced into the NASA scientific and technical information system in Feb. 1992. Subject coverage includes: design, construction, and testing of aircraft and aircraft engines; aircraft components, equipment, and systems; ground support systems; and theoretical and applied aspects of aerodynamics and general fluid dynamics

The Use of Advanced Soft Computing for Machinery Condition Monitoring

The demand for cost effective, reliable and safe machinery operation requires accurate fault detection and classification. These issues are of paramount importance as potential failures of rotating and reciprocating machinery can be managed properly and avoided in some cases. Various methods have been applied to tackle these issues, but the accuracy of those methods is variable and leaves scope for improvement. This research proposes appropriate methods for fault detection and diagnosis. The main consideration of this study is use Artificial Intelligence (AI) and related mathematics approaches to build a condition monitoring (CM) system that has incremental learning capabilities to select effective diagnostic features for the fault diagnosis of a reciprocating compressor (RC). The investigation involved a series of experiments conducted on a two-stage RC at baseline condition and then with faults introduced into the intercooler, drive belt and 2nd stage discharge and suction valve respectively. In addition to this, three combined faults: discharge valve leakage combined with intercooler leakage, suction valve leakage combined with intercooler leakage and discharge valve leakage combined with suction valve leakage were created and simulated to test the model. The vibration data was collected from the experimental RC and processed through pre-processing stage, features extraction, features selection before the developed diagnosis and classification model were built. A large number of potential features are calculated from the time domain, the frequency domain and the envelope spectrum. Applying Neural Networks (NNs), Support Vector Machines (SVMs), Relevance Vector Machines (RVMs) which integrate with Genetic Algorithms (GAs), and principle components analysis (PCA) which cooperates with principle components optimisation, to these features, has found that the features from envelope analysis have the most potential for differentiating various common faults in RCs. The practical results for fault detection, diagnosis and classification show that the proposed methods perform very well and accurately and can be used as effective tools for diagnosing reciprocating machinery failure

Dynamical systems : mechatronics and life sciences

Proceedings of the 13th Conference „Dynamical Systems - Theory and Applications" summarize 164 and the Springer Proceedings summarize 60 best papers of university teachers and students, researchers and engineers from whole the world. The papers were chosen by the International Scientific Committee from 315 papers submitted to the conference. The reader thus obtains an overview of the recent developments of dynamical systems and can study the most progressive tendencies in this field of science

Mining Safety and Sustainability I

Safety and sustainability are becoming ever bigger challenges for the mining industry with the increasing depth of mining. It is of great significance to reduce the disaster risk of mining accidents, enhance the safety of mining operations, and improve the efficiency and sustainability of development of mineral resource. This book provides a platform to present new research and recent advances in the safety and sustainability of mining. More specifically, Mining Safety and Sustainability presents recent theoretical and experimental studies with a focus on safety mining, green mining, intelligent mining and mines, sustainable development, risk management of mines, ecological restoration of mines, mining methods and technologies, and damage monitoring and prediction. It will be further helpful to provide theoretical support and technical support for guiding the normative, green, safe, and sustainable development of the mining industry

Engineering Dynamics and Life Sciences

From Preface: This is the fourteenth time when the conference “Dynamical Systems: Theory and Applications” gathers a numerous group of outstanding scientists and engineers, who deal with widely understood problems of theoretical and applied dynamics. Organization of the conference would not have been possible without a great effort of the staff of the Department of Automation, Biomechanics and Mechatronics. The patronage over the conference has been taken by the Committee of Mechanics of the Polish Academy of Sciences and Ministry of Science and Higher Education of Poland. It is a great pleasure that our invitation has been accepted by recording in the history of our conference number of people, including good colleagues and friends as well as a large group of researchers and scientists, who decided to participate in the conference for the first time. With proud and satisfaction we welcomed over 180 persons from 31 countries all over the world. They decided to share the results of their research and many years experiences in a discipline of dynamical systems by submitting many very interesting papers. This year, the DSTA Conference Proceedings were split into three volumes entitled “Dynamical Systems” with respective subtitles: Vibration, Control and Stability of Dynamical Systems; Mathematical and Numerical Aspects of Dynamical System Analysis and Engineering Dynamics and Life Sciences. Additionally, there will be also published two volumes of Springer Proceedings in Mathematics and Statistics entitled “Dynamical Systems in Theoretical Perspective” and “Dynamical Systems in Applications”