3D printing for bio-synthetic biliary stents

Three-dimensional (3D) printing is an additive manufacturing method that holds great potential in a variety of future patient-specific medical technologies. This project validated a novel crosslinked polyvinyl alcohol (XL-PVA) 3D printed stent infused with collagen, human placental mesenchymal stem cells (PMSCs), and cholangiocytes. The biofabrication method in the present study examined 3D printing and collagen injection molding for rapid prototyping of customized living biliary stents with clinical applications in the setting of malignant and benign bile duct obstructions. XL-PVA stents showed hydrophilic swelling and addition of radiocontrast to the stent matrix improved radiographic opacity. Collagen loaded with PMSCs contracted tightly around hydrophilic stents and dense choloangiocyte coatings were verified through histology and fluorescence microscopy. It is anticipated that design elements used in these stents may enable appropriate stent placement, provide protection of the stent-stem cell matrix against bile constituents, and potentially limit biofilm development. Overall, this approach may allow physicians to create personalized bio-integrating stents for use in biliary procedures and lays a foundation for new patient-specific stent fabrication techniques

Comparison of crystallization characteristics and mechanical properties of polypropylene processed by ultrasound and conventional micro injection molding

YesUltrasound injection molding has emerged as an alternative production route for the manufacturing of micro-scale polymeric components, where it offers significant benefits over the conventional micro-injection molding process. In this work, the effects of ultrasound melting on the mechanical and morphological properties of micro-polypropylene parts were characterized. The ultrasound injection molding process was experimentally compared to the conventional micro-injection molding process using a novel mold, which allows mounting on both machines and visualization of the melt flow for both molding processes. Direct measurements of the flow front speed and temperature distributions were performed using both conventional and thermal high-speed imaging techniques. The manufacturing of micro-tensile specimens allowed the comparison of the mechanical properties of the parts obtained with the different processes. The results indicated that the ultrasound injection molding process could be an efficient alternative to the conventional process

Multilayer injection molding

Visualization of the fountain flow in a piston driven non-Newtonian flow is studied by means of experiments and numerical computation. The result will be applied to the multilayer injection molding technique, where an accumulator is used, to store the polymer melt. The discontinuity at the contactline of the piston and the wall of the cylinder appears to have consideranble influence on the total deformation history

Simplex space-time meshes in thermally coupled two-phase flow simulations of mold filling

The quality of plastic parts produced through injection molding depends on many factors. Especially during the filling stage, defects such as weld lines, burrs, or insufficient filling can occur. Numerical methods need to be employed to improve product quality by means of predicting and simulating the injection molding process. In the current work, a highly viscous incompressible non-isothermal two-phase flow is simulated, which takes place during the cavity filling. The injected melt exhibits a shear-thinning behavior, which is described by the Carreau-WLF model. Besides that, a novel discretization method is used in the context of 4D simplex space-time grids [2]. This method allows for local temporal refinement in the vicinity of, e.g., the evolving front of the melt [10]. Utilizing such an adaptive refinement can lead to locally improved numerical accuracy while maintaining the highest possible computational efficiency in the remaining of the domain. For demonstration purposes, a set of 2D and 3D benchmark cases, that involve the filling of various cavities with a distributor, are presented.Comment: 14 pages, 11 Figures, 4 Table

Rapid Prototyping Using FDM: A Fast, Precise, Safe Technology

This paper outlines the use of FDM to speed product design and to streamline the manufacturing process. Time compression, the ability to quickly reduce the time it takes to get new products to market, has increased the pressure on all phases of the manufacturing process. Manufacturers must find and implement time saving systems without sacrificing quality.Mechanical Engineerin

Exploring Vacuum Casting Techniques for Micron and Submicron Features

A study of resolution limits in standard rapid prototyping vacuum cast molding processes and adaptation of this technique to reach submicron accuracy is proposed. Micro-fabrication technologies are used to fabricate micron and submicron high aspect-ratio patterns on the original parts. The molding of the original parts is optimized to allow replication of submicron features. In carefully exploring materials and surface treatments, cast parts are successfully replicated with submicron and high aspect ratio micron structures. These encouraging results enable the use of such processes for micro- and nano-systems applications and open the door to development and production of low cost, high resolution biochips.Mechanical Engineerin

Flow behavior in liquid molding

The liquid molding (LM) process for manufacturing polymer composites with structural properties has the potential to significantly lower fabrication costs and increase production rates. LM includes both resin transfer molding and structural reaction injection molding. To achieve this potential, however, the underlying science base must be improved to facilitate effective process optimization and implementation of on-line process control. The National Institute of Standards and Technology (NIST) has a major program in LM that includes materials characterization, process simulation models, on-line process monitoring and control, and the fabrication of test specimens. The results of this program are applied to real parts through cooperative projects with industry. The key feature in the effort is a comprehensive and integrated approach to the processing science aspects of LM. This paper briefly outlines the NIST program and uses several examples to illustrate the work