The quality of plastic parts produced through injection molding depends on
many factors. Especially during the filling stage, defects such as weld lines,
burrs, or insufficient filling can occur. Numerical methods need to be employed
to improve product quality by means of predicting and simulating the injection
molding process. In the current work, a highly viscous incompressible
non-isothermal two-phase flow is simulated, which takes place during the cavity
filling. The injected melt exhibits a shear-thinning behavior, which is
described by the Carreau-WLF model. Besides that, a novel discretization method
is used in the context of 4D simplex space-time grids [2]. This method allows
for local temporal refinement in the vicinity of, e.g., the evolving front of
the melt [10]. Utilizing such an adaptive refinement can lead to locally
improved numerical accuracy while maintaining the highest possible
computational efficiency in the remaining of the domain. For demonstration
purposes, a set of 2D and 3D benchmark cases, that involve the filling of
various cavities with a distributor, are presented.Comment: 14 pages, 11 Figures, 4 Table
