Virtual Topology Design for Minimizing Network Diameter and Average Hop Count in WDM Networks

We design virtual topologies in wavelength division multiplexing (WDM) networks to minimize the network diameter and average hop count, where network diameter refers to the number of hops of the longest shortest path and average hop count is the average number of hops among the shortest paths of all node pairs. Such objectives are important to WDM networks, especially to those with statistical multiplexing mechanisms such as optical burst switching (OBS) and optical packet switching (OPS). By minimizing the network diameter and average hop count, optical packets or bursts will experience less contention loss and smaller delay due to a reduced number of intermediate nodes en route. In this paper, we first formulate an integer linear program (ILP) for optimal design of virtual topologies with minimized network diameter and average hop count. Then, a novel heuristic least weight minimum diameter (LWMD) is proposed to find good solutions efficiently. Based on the virtual topology obtained, we further design two traffic accommodation schemes to provision wavelengths under a given traffic matrix, with guaranteed network diameter and minimized network resource consumption.published_or_final_versio

An Overview on Application of Machine Learning Techniques in Optical Networks

Today's telecommunication networks have become sources of enormous amounts of widely heterogeneous data. This information can be retrieved from network traffic traces, network alarms, signal quality indicators, users' behavioral data, etc. Advanced mathematical tools are required to extract meaningful information from these data and take decisions pertaining to the proper functioning of the networks from the network-generated data. Among these mathematical tools, Machine Learning (ML) is regarded as one of the most promising methodological approaches to perform network-data analysis and enable automated network self-configuration and fault management. The adoption of ML techniques in the field of optical communication networks is motivated by the unprecedented growth of network complexity faced by optical networks in the last few years. Such complexity increase is due to the introduction of a huge number of adjustable and interdependent system parameters (e.g., routing configurations, modulation format, symbol rate, coding schemes, etc.) that are enabled by the usage of coherent transmission/reception technologies, advanced digital signal processing and compensation of nonlinear effects in optical fiber propagation. In this paper we provide an overview of the application of ML to optical communications and networking. We classify and survey relevant literature dealing with the topic, and we also provide an introductory tutorial on ML for researchers and practitioners interested in this field. Although a good number of research papers have recently appeared, the application of ML to optical networks is still in its infancy: to stimulate further work in this area, we conclude the paper proposing new possible research directions

Service-Oriented Multigranular Optical Network Architecture for Clouds

This paper presents a novel service-oriented network architecture to bridge the informational gap between user applications and optical networks providing technology-agnostic multigranular optical network services for clouds. A mediation layer (service plane) between user applications and network control is proposed to facilitate a mapping process between user application requests and the network services. At the network level, a multigranular optical network (MGON) is proposed and implemented to support dynamic wavelength and subwavelength granularities with different transport formats [optical burst switched (OBS), optical burst transport (OBT)], reservation protocols (one-way, two-way), and different quality-of-service (QoS) levels per service type. The service-oriented multigranular optical network has been designed, implemented, and demonstrated on an experimental testbed. The testbed consists of service and network resource provisioning, service abstraction, and network resource virtualization. The service-to-network interoperation is provided by means of a gateway that maps service requests to technology-specific parameters and a common signaling channel for both service and network resource provisioning

A GMPLS/OBS network architecture enabling QoS-aware end-to-end burst transport

This paper introduces a Generalized Multi-Protocol Label Switching (GMPLS)-enabled Optical Burst Switched (OBS) network architecture featuring end-to-end QoS-aware burst transport services. This is achieved by setting up burst Label Switched Paths (LSPs) properly dimensioned to match specific burst drop probability requirements. These burst LSPs are used for specific guaranteed QoS levels, whereas the remaining network capacity can be left for best-effort burst support. Aiming to ensure the requested burst drop probability figures even under bursty traffic patterns, burst LSPs’ performance is continuously monitored. Therefore, GMPLS-driven capacity reconfigurations can be dynamically triggered whether unfavorable network conditions are detected. Through the paper, the GMPLS/OBS architecture is firstly detailed, followed by the presentation of the optimized methods used for the initial burst LSP dimensioning. The successful network performance is finally illustrated by simulations on several network scenarios.Preprin

Time Shared Optical Network (TSON): a novel metro architecture for flexible multi-granular services

This paper presents the Time Shared Optical Network (TSON) as metro mesh network architecture for guaranteed, statistically-multiplexed services. TSON proposes a flexible and tunable time-wavelength assignment along with one-way tree-based reservation and node architecture. It delivers guaranteed sub-wavelength and multi-granular network services without wavelength conversion, time-slice interchange and optical buffering. Simulation results demonstrate high network utilization, fast service delivery, and low end-to-end delay on a contention-free sub-wavelength optical transport network. In addition, implementation complexity in terms of Layer 2 aggregation, grooming and optical switching has been evaluated

Cross-layer modeling and optimization of next-generation internet networks

Scaling traditional telecommunication networks so that they are able to cope with the volume of future traffic demands and the stringent European Commission (EC) regulations on emissions would entail unaffordable investments. For this very reason, the design of an innovative ultra-high bandwidth power-efficient network architecture is nowadays a bold topic within the research community. So far, the independent evolution of network layers has resulted in isolated, and hence, far-from-optimal contributions, which have eventually led to the issues today's networks are facing such as inefficient energy strategy, limited network scalability and flexibility, reduced network manageability and increased overall network and customer services costs. Consequently, there is currently large consensus among network operators and the research community that cross-layer interaction and coordination is fundamental for the proper architectural design of next-generation Internet networks. This thesis actively contributes to the this goal by addressing the modeling, optimization and performance analysis of a set of potential technologies to be deployed in future cross-layer network architectures. By applying a transversal design approach (i.e., joint consideration of several network layers), we aim for achieving the maximization of the integration of the different network layers involved in each specific problem. To this end, Part I provides a comprehensive evaluation of optical transport networks (OTNs) based on layer 2 (L2) sub-wavelength switching (SWS) technologies, also taking into consideration the impact of physical layer impairments (PLIs) (L0 phenomena). Indeed, the recent and relevant advances in optical technologies have dramatically increased the impact that PLIs have on the optical signal quality, particularly in the context of SWS networks. Then, in Part II of the thesis, we present a set of case studies where it is shown that the application of operations research (OR) methodologies in the desing/planning stage of future cross-layer Internet network architectures leads to the successful joint optimization of key network performance indicators (KPIs) such as cost (i.e., CAPEX/OPEX), resources usage and energy consumption. OR can definitely play an important role by allowing network designers/architects to obtain good near-optimal solutions to real-sized problems within practical running times