Video Multicast in (large) local area networks

We consider the problem of distributing high-quality video signals over IP multicast in large Local Area Networks (LANs), under real-time delay constraints, and with software-only processing. In a large LAN (such as the network of a university campus, or the network of a large company), the source of channel heterogeneity that the video communications system must cope with is not that of different bandwidth constraints available to each receiver, but it is essentially variations in the available CPU power that each receiver will have in order to decode the incoming signal. In this paper we propose a new architecture for a video multicast system, present the design of the different components of this system, and show results obtained in a real implementation. Our feeds consist of video encoded at about 3 Mbits/sec and 16 frames/sec, capable of tolerating the loss of about 300 Kbits/sec worth of data. Decoding is performed on Linux PCs, and the quality of our reconstructed signals degrades gracefully with the speed of the CPU on which the receiver runs

QoS Multicast Routing with Heterogeneous Receivers

When supporting source-specific heterogeneous-receiver multimedia applications, a multicast tree is built among a source and the receivers such that the path from the source to each receiver satisfies the delay and bandwidth constraints. To optimize the network usage, it is desirable to find a multicast tree that minimizes the total bandwidth used while satisfying the different delay and bandwidth requirements of the receivers. For scalability reason, the desired protocol should require little or minimum storage in the sender and other on-tree routers. Moreover, to allow dynamic member join or leave, a receiver-initiated approach is more appropriate. In this paper, we describe our receiver-initiated QoS multicast protocol that aims at reducing the bandwidth used in building a multicast tree for heterogeneous receivers by actively identifying better sub-optimal paths. Our protocol does not require additional information to be stored in the on-tree routers, and it is able to construct a better sub-optimal tree than existing protocols.published_or_final_versio

Évaluation de mécanismes de contrôle d'erreur pour des transmissions multipoints sur des réseaux de mobiles

Cet article présente un ensemble de traces de pertes de paquets recueillies lors de transmissions multipoints 802.11b réalisées dans des conditions de réception variables (récepteurs mobiles et fixes). Une approche originale consistant à "plaquer" a posteriori certains mécanismes de contrôle d'erreur sur ces observations est ensuite présentée. Cette approche permet d'évaluer les performances de ces mécanismes en fonction de leurs paramètres et de certaines propriétés du canal. En particulier, il est montré que des mécanismes relativement simples, basés sur des retransmissions et/ou des codes correcteurs d'erreurs de petite longueur, obtiennent dans ce contexte de très bonnes performances

Interactive mixed reality rendering in a distributed ray tracing framework

The recent availability of interactive ray tracing opened the way for new applications and for improving existing ones in terms of quality. Since today CPUs are still too slow for this purpose, the necessary computing power is obtained by connecting a number of machines and using distributed algorithms. Mixed reality rendering - the realm of convincingly combining real and virtual parts to a new composite scene - needs a powerful rendering method to obtain a photorealistic result. The ray tracing algorithm thus provides an excellent basis for photorealistic rendering and also advantages over other methods. It is worth to explore its abilities for interactive mixed reality rendering. This thesis shows the applicability of interactive ray tracing for mixed (MR) and augmented reality (AR) applications on the basis of the OpenRT framework. Two extensions to the OpenRT system are introduced and serve as basic building blocks: streaming video textures and in-shader AR view compositing. Streaming video textures allow for inclusion of the real world into interactive applications in terms of imagery. The AR view compositing mechanism is needed to fully exploit the advantages of modular shading in a ray tracer. A number of example applications from the entire spectrum of the Milgram Reality-Virtuality continuum illustrate the practical implications. An implementation of a classic AR scenario, inserting a virtual object into live video, shows how a differential rendering method can be used in combination with a custom build real-time lightprobe device to capture the incident light and include it into the rendering process to achieve convincing shading and shadows. Another field of mixed reality rendering is the insertion of real actors into a virtual scene in real-time. Two methods - video billboards and a live 3D visual hull reconstruction - are discussed. The implementation of live mixed reality systems is based on a number of technologies beside rendering and a comprehensive understanding of related methods and hardware is necessary. Large parts of this thesis hence deal with the discussion of technical implementations and design alternatives. A final summary discusses the benefits and drawbacks of interactive ray tracing for mixed reality rendering.Die Verfügbarkeit von interaktivem Ray-Tracing ebnet den Weg für neue Anwendungen, aber auch für die Verbesserung der Qualität bestehener Methoden. Da die heute verfügbaren CPUs noch zu langsam sind, ist es notwendig, mehrere Maschinen zu verbinden und verteilte Algorithmen zu verwenden. Mixed Reality Rendering - die Technik der überzeugenden Kombination von realen und synthetischen Teilen zu einer neuen Szene - braucht eine leistungsfähige Rendering-Methode um photorealistische Ergebnisse zu erzielen. Der Ray-Tracing-Algorithmus bietet hierfür eine exzellente Basis, aber auch Vorteile gegenüber anderen Methoden. Es ist naheliegend, die Möglichkeiten von Ray-Tracing für Mixed-Reality-Anwendungen zu erforschen. Diese Arbeit zeigt die Anwendbarkeit von interaktivem Ray-Tracing für Mixed-Reality (MR) und Augmented-Reality (AR) Anwendungen anhand des OpenRT-Systems. Zwei Erweiterungen dienen als Grundbausteine: Videotexturen und In-Shader AR View Compositing. Videotexturen erlauben die reale Welt in Form von Bildern in den Rendering-Prozess mit einzubeziehen. Der View-Compositing-Mechanismus is notwendig um die Modularität einen Ray-Tracers voll auszunutzen. Eine Reihe von Beispielanwendungen von beiden Enden des Milgramschen Reality-Virtuality-Kontinuums verdeutlichen die praktischen Aspekte. Eine Implementierung des klassischen AR-Szenarios, das Einfügen eines virtuellen Objektes in eine Live-Übertragung zeigt, wie mittels einer Differential Rendering Methode und einem selbstgebauten Gerät zur Erfassung des einfallenden Lichts realistische Beleuchtung und Schatten erzielt werden können. Ein anderer Anwendungsbereich ist das Einfügen einer realen Person in eine künstliche Szene. Hierzu werden zwei Methoden besprochen: Video-Billboards und eine interaktive 3D Rekonstruktion. Da die Implementierung von Mixed-Reality-Anwendungen Kentnisse und Verständnis einer ganzen Reihe von Technologien nebem dem eigentlichen Rendering voraus setzt, ist eine Diskussion der technischen Grundlagen ein wesentlicher Bestandteil dieser Arbeit. Dies ist notwenig, um die Entscheidungen für bestimmte Designalternativen zu verstehen. Den Abschluss bildet eine Diskussion der Vor- und Nachteile von interaktivem Ray-Tracing für Mixed Reality Anwendungen

Interactive mixed reality rendering in a distributed ray tracing framework

The recent availability of interactive ray tracing opened the way for new applications and for improving existing ones in terms of quality. Since today CPUs are still too slow for this purpose, the necessary computing power is obtained by connecting a number of machines and using distributed algorithms. Mixed reality rendering - the realm of convincingly combining real and virtual parts to a new composite scene - needs a powerful rendering method to obtain a photorealistic result. The ray tracing algorithm thus provides an excellent basis for photorealistic rendering and also advantages over other methods. It is worth to explore its abilities for interactive mixed reality rendering. This thesis shows the applicability of interactive ray tracing for mixed (MR) and augmented reality (AR) applications on the basis of the OpenRT framework. Two extensions to the OpenRT system are introduced and serve as basic building blocks: streaming video textures and in-shader AR view compositing. Streaming video textures allow for inclusion of the real world into interactive applications in terms of imagery. The AR view compositing mechanism is needed to fully exploit the advantages of modular shading in a ray tracer. A number of example applications from the entire spectrum of the Milgram Reality-Virtuality continuum illustrate the practical implications. An implementation of a classic AR scenario, inserting a virtual object into live video, shows how a differential rendering method can be used in combination with a custom build real-time lightprobe device to capture the incident light and include it into the rendering process to achieve convincing shading and shadows. Another field of mixed reality rendering is the insertion of real actors into a virtual scene in real-time. Two methods - video billboards and a live 3D visual hull reconstruction - are discussed. The implementation of live mixed reality systems is based on a number of technologies beside rendering and a comprehensive understanding of related methods and hardware is necessary. Large parts of this thesis hence deal with the discussion of technical implementations and design alternatives. A final summary discusses the benefits and drawbacks of interactive ray tracing for mixed reality rendering.Die Verfügbarkeit von interaktivem Ray-Tracing ebnet den Weg für neue Anwendungen, aber auch für die Verbesserung der Qualität bestehener Methoden. Da die heute verfügbaren CPUs noch zu langsam sind, ist es notwendig, mehrere Maschinen zu verbinden und verteilte Algorithmen zu verwenden. Mixed Reality Rendering - die Technik der überzeugenden Kombination von realen und synthetischen Teilen zu einer neuen Szene - braucht eine leistungsfähige Rendering-Methode um photorealistische Ergebnisse zu erzielen. Der Ray-Tracing-Algorithmus bietet hierfür eine exzellente Basis, aber auch Vorteile gegenüber anderen Methoden. Es ist naheliegend, die Möglichkeiten von Ray-Tracing für Mixed-Reality-Anwendungen zu erforschen. Diese Arbeit zeigt die Anwendbarkeit von interaktivem Ray-Tracing für Mixed-Reality (MR) und Augmented-Reality (AR) Anwendungen anhand des OpenRT-Systems. Zwei Erweiterungen dienen als Grundbausteine: Videotexturen und In-Shader AR View Compositing. Videotexturen erlauben die reale Welt in Form von Bildern in den Rendering-Prozess mit einzubeziehen. Der View-Compositing-Mechanismus is notwendig um die Modularität einen Ray-Tracers voll auszunutzen. Eine Reihe von Beispielanwendungen von beiden Enden des Milgramschen Reality-Virtuality-Kontinuums verdeutlichen die praktischen Aspekte. Eine Implementierung des klassischen AR-Szenarios, das Einfügen eines virtuellen Objektes in eine Live-Übertragung zeigt, wie mittels einer Differential Rendering Methode und einem selbstgebauten Gerät zur Erfassung des einfallenden Lichts realistische Beleuchtung und Schatten erzielt werden können. Ein anderer Anwendungsbereich ist das Einfügen einer realen Person in eine künstliche Szene. Hierzu werden zwei Methoden besprochen: Video-Billboards und eine interaktive 3D Rekonstruktion. Da die Implementierung von Mixed-Reality-Anwendungen Kentnisse und Verständnis einer ganzen Reihe von Technologien nebem dem eigentlichen Rendering voraus setzt, ist eine Diskussion der technischen Grundlagen ein wesentlicher Bestandteil dieser Arbeit. Dies ist notwenig, um die Entscheidungen für bestimmte Designalternativen zu verstehen. Den Abschluss bildet eine Diskussion der Vor- und Nachteile von interaktivem Ray-Tracing für Mixed Reality Anwendungen

Resource allocation and adaptive scheduling for scalable video streaming

The obvious recent advances in areas such as video compression and network architectures allow for the deployment of novel video distribution applications. These have the potential to provide ubiquitous media access to end users. In recent years, applications based on audio and video streaming have turned out to be immensely popular and the Internet has become the most widely used vector for media content distribution, due to its high availability and connectivity. However, the nature of the Internet infrastructure is not adapted to the specific characteristics of multimedia traffic, which presents a certain tolerance to losses, but strict delay and high bandwidth requirements. In this thesis, our goal is to improve the efficiency of media delivery over the existing network architecture. In order to do so we consider the delivery of scalable video in three main delivery scenarios, namely one-to-one client server architectures, one-to-many broadcasting architectures, and many-to-one distributed streaming architectures. First, we propose a distributed media-friendly rate allocation algorithm for the delivery of both finely and coarsely scalable video streams. Unlike existing solutions, our algorithm explicitly takes the characteristics of media streams into consideration. As a result, it provides rate allocations that better fit the heterogeneous characteristics of media streams. We outline an implementation that is robust to random feedback delays and that permits a scalable deployment of the algorithm. The rate allocation that is computed by our algorithm achieves network stability and high bandwidth utilization. It moreover allows to maximize the average received quality for all streams that are delivered in the network. While considering the transmission of coarsely layered streams, we derive conditions on the encoding rates of the video layers. These conditions depend on the allowed end-to-end delay and on the rate allocation algorithm that controls the sending rates. They allow us to take full advantage of the allocated transmission rates. Second, we investigate the problem of jointly addressing the needs of multiple receivers that consume different versions of a layered media stream in a broadcasting scenario. We provide optimal scheduling algorithms that jointly optimize the playback delay and the buffer occupancy at all of these receivers when the used channel is known. Furthermore we analyze low complexity heuristics based optimization techniques, which provide close to optimal results when only limited channel knowledge is available. Finally, we explore the possibility to exploit the inherent network diversity that is provided by the Internet infrastructure. In particular, we consider media delivery schemes where multiple senders are available for the transmission of a scalable video stream to a single client. Such an architecture is referred to as a distributed streaming architecture. It has the benefit of aggregating multiple unreliable channels into a single more robust channel with high availability. Through the use of Fountain codes, we are able to transform the distributed streaming problem into a rate allocation problem of lower complexity. The solution to this problem is shown to depend not only on the average packet loss rate, but also on the average length of packet loss bursts that are observed on each of the available channels. The coding scheme that we suggest enables our system to adapt the streamed content to the network characteristics, as well as to the needs of the receiving client