106 research outputs found
Motion blur in digital images - analys, detection and correction of motion blur in photogrammetry
Unmanned aerial vehicles (UAV) have become an interesting and active research topic for photogrammetry. Current research is based on images acquired by an UAV, which have a high ground resolution and good spectral and radiometrical resolution, due to the low flight altitudes combined with a high resolution camera. UAV image flights are also cost effective and have become attractive for many applications including, change detection in small scale areas.
One of the main problems preventing full automation of data processing of UAV imagery is the degradation effect of blur caused by camera movement during image acquisition. This can be caused by the normal flight movement of the UAV as well as strong winds, turbulence or sudden operator inputs. This blur disturbs the visual analysis and interpretation of the data, causes errors and can degrade the accuracy in automatic photogrammetric processing algorithms. The detection and removal of these images is currently achieved manually, which is both time consuming and prone to error, particularly for large image-sets. To increase the quality of data processing an automated process is necessary, which must be both reliable and quick.
This thesis proves the negative affect that blurred images have on photogrammetric processing. It shows that small amounts of blur do have serious impacts on target detection and that it slows down processing speed due to the requirement of human intervention. Larger blur can make an image completely unusable and needs to be excluded from processing. To exclude images out of large image datasets an algorithm was developed. The newly developed method makes it possible to detect blur caused by linear camera displacement. The method is based on human detection of blur. Humans detect blurred images best by comparing it to other images in order to establish whether an image is blurred or not. The developed algorithm simulates this procedure by creating an image for comparison using image processing. Creating internally a comparable image makes the method independent of additional images. However, the calculated blur value named SIEDS (saturation image edge difference standard-deviation) on its own does not provide an absolute number to judge if an image is blurred or not. To achieve a reliable judgement of image sharpness the SIEDS value has to be compared to other SIEDS values of the same dataset.
This algorithm enables the exclusion of blurred images and subsequently allows photogrammetric processing without them. However, it is also possible to use deblurring techniques to restor blurred images. Deblurring of images is a widely researched topic and often based on the Wiener or Richardson-Lucy deconvolution, which require precise knowledge of both the blur path and extent. Even with knowledge about the blur kernel, the correction causes errors such as ringing, and the deblurred image appears muddy and not completely sharp. In the study reported in this paper, overlapping images are used to support the deblurring process. An algorithm based on the Fourier transformation is presented. This works well in flat areas, but the need for geometrically correct sharp images for deblurring may limit the application. Another method to enhance the image is the unsharp mask method, which improves images significantly and makes photogrammetric processing more successful. However, deblurring of images needs to focus on geometric correct deblurring to assure geometric correct measurements. Furthermore, a novel edge shifting approach was developed which aims to do geometrically correct deblurring. The idea of edge shifting appears to be promising but requires more advanced programming
Adaptive Temporal Compressive Sensing for Video
This paper introduces the concept of adaptive temporal compressive sensing
(CS) for video. We propose a CS algorithm to adapt the compression ratio based
on the scene's temporal complexity, computed from the compressed data, without
compromising the quality of the reconstructed video. The temporal adaptivity is
manifested by manipulating the integration time of the camera, opening the
possibility to real-time implementation. The proposed algorithm is a
generalized temporal CS approach that can be incorporated with a diverse set of
existing hardware systems.Comment: IEEE Interonal International Conference on Image Processing
(ICIP),201
Recent Progress in Image Deblurring
This paper comprehensively reviews the recent development of image
deblurring, including non-blind/blind, spatially invariant/variant deblurring
techniques. Indeed, these techniques share the same objective of inferring a
latent sharp image from one or several corresponding blurry images, while the
blind deblurring techniques are also required to derive an accurate blur
kernel. Considering the critical role of image restoration in modern imaging
systems to provide high-quality images under complex environments such as
motion, undesirable lighting conditions, and imperfect system components, image
deblurring has attracted growing attention in recent years. From the viewpoint
of how to handle the ill-posedness which is a crucial issue in deblurring
tasks, existing methods can be grouped into five categories: Bayesian inference
framework, variational methods, sparse representation-based methods,
homography-based modeling, and region-based methods. In spite of achieving a
certain level of development, image deblurring, especially the blind case, is
limited in its success by complex application conditions which make the blur
kernel hard to obtain and be spatially variant. We provide a holistic
understanding and deep insight into image deblurring in this review. An
analysis of the empirical evidence for representative methods, practical
issues, as well as a discussion of promising future directions are also
presented.Comment: 53 pages, 17 figure
Automatic isolation of blurred images from UAV image sequences
Unmanned aerial vehicles (UAV) have become an interesting and active research topic for photogrammetry. Current research is based on images acquired by an UAV, which have a high ground resolution and good spectral and radiometrical resolution, due to the low flight altitudes combined with a high resolution camera. UAV image flights are also cost effective and have become attractive for many applications including change detection in small scale areas. One of the main problems preventing full automation of data processing of UAV imagery is the degradation effect of blur caused by camera movement during image acquisition. This can be caused by the normal flight movement of the UAV as well as strong winds, turbulence or sudden operator inputs. This blur disturbs the visual analysis and interpretation of the data, causes errors and can degrade the accuracy in automatic photogrammetric processing algorithms. The detection and removal of these images is currently achieved manually, which is both time consuming and prone to error, particularly for large image-sets. To increase the quality of data processing an automated filtering process is necessary, which must be both reliable and quick. This paper describes the development of an automatic filtering process, which is based upon the quantification of blur in an image. A “shaking table” was used to create images with known blur during a series of laboratory tests. This platform can be moved in one direction by a mathematical function controlled by a defined frequency and amplitude. The shaking table was used to displace a Nikon D80 digital SLR camera with a user defined frequency and amplitude. The actual camera displacement was measured accurately and exposures were synchronized, which provided the opportunity to acquire images with a known blur effect. Acquired images were processed digitally to determine a quantifiable measure of image blur, which has been created by the actual shaking table function. Once determined for a sequence of images, a user defined threshold can be used to differentiate between “blurred” and "acceptable" images. A subsequent step is to establish the effect that blurred images have upon the accuracy of subsequent measurements. Both of these aspects will be discussed in this paper and future work identified
Video Frame Interpolation for High Dynamic Range Sequences Captured with Dual-exposure Sensors
Video frame interpolation (VFI) enables many important applications thatmight involve the temporal domain, such as slow motion playback, or the spatialdomain, such as stop motion sequences. We are focusing on the former task,where one of the key challenges is handling high dynamic range (HDR) scenes inthe presence of complex motion. To this end, we explore possible advantages ofdual-exposure sensors that readily provide sharp short and blurry longexposures that are spatially registered and whose ends are temporally aligned.This way, motion blur registers temporally continuous information on the scenemotion that, combined with the sharp reference, enables more precise motionsampling within a single camera shot. We demonstrate that this facilitates amore complex motion reconstruction in the VFI task, as well as HDR framereconstruction that so far has been considered only for the originally capturedframes, not in-between interpolated frames. We design a neural network trainedin these tasks that clearly outperforms existing solutions. We also propose ametric for scene motion complexity that provides important insights into theperformance of VFI methods at the test time.<br
- …