Bit-level pipelined digit-serial array processors

A new architecture for high performance digit-serial vector inner product (VIP) which can be pipelined to the bit-level is introduced. The design of the digit-serial vector inner product is based on a new systematic design methodology using radix-2n arithmetic. The proposed architecture allows a high level of bit-level pipelining to increase the throughput rate with minimum initial delay and minimum area. This will give designers greater flexibility in finding the best tradeoff between hardware cost and throughput rate. It is shown that sub-digit pipelined digit-serial structure can achieve a higher throughput rate with much less area consumption than an equivalent bit-parallel structure. A twin-pipe architecture to double the throughput rate of digit-serial multipliers and consequently that of the digit-serial vector inner product is also presented. The effect of the number of pipelining levels and the twin-pipe architecture on the throughput rate and hardware cost are discussed. A two's complement digit-serial architecture which can operate on both negative and positive numbers is also presented

Digit-Level Serial-In Parallel-Out Multiplier Using Redundant Representation for a Class of Finite Fields

Two digit-level finite field multipliers in F2m using redundant representation are presented. Embedding F2m in cyclotomic field F2(n) causes a certain amount of redundancy and consequently performing field multiplication using redundant representation would require more hardware resources. Based on a specific feature of redundant representation in a class of finite fields, two new multiplication algorithms along with their pertaining architectures are proposed to alleviate this problem. Considering area-delay product as a measure of evaluation, it has been shown that both the proposed architectures considerably outperform existing digit-level multipliers using the same basis. It is also shown that for a subset of the fields, the proposed multipliers are of higher performance in terms of area-delay complexities among several recently proposed optimal normal basis multipliers. The main characteristics of the postplace&route application specific integrated circuit implementation of the proposed multipliers for three practical digit sizes are also reported

High speed world level finite field multipliers in F2m

Finite fields have important applications in number theory, algebraic geometry, Galois theory, cryptography, and coding theory. Recently, the use of finite field arithmetic in the area of cryptography has increasingly gained importance. Elliptic curve and El-Gamal cryptosystems are two important examples of public key cryptosystems widely used today based on finite field arithmetic. Research in this area is moving toward finding new architectures to implement the arithmetic operations more efficiently. Two types of finite fields are commonly used in practice, prime field GF(p) and the binary extension field GF(2 m). The binary extension fields are attractive for high speed cryptography applications since they are suitable for hardware implementations. Hardware implementation of finite field multipliers can usually be categorized into three categories: bit-serial, bit-parallel, and word-level architectures. The word-level multipliers provide architectural flexibility and trade-off between the performance and limitations of VLSI implementation and I/O ports, thus it is of more practical significance. In this work, different word level architectures for multiplication using binary field are proposed. It has been shown that the proposed architectures are more efficient compared to similar proposals considering area/delay complexities as a measure of performance. Practical size multipliers for cryptography applications have been realized in hardware using FPGA or standard CMOS technology, to similar proposals considering area/delay complexities as a measure of performance. Practical size multipliers for cryptography applications have been realized in hardware using FPGA or standard CMOS technology. Also different VLSI implementations for multipliers were explored which resulted in more efficient implementations for some of the regular architectures. The new implementations use a simple module designed in domino logic as the main building block for the multiplier. Significant speed improvements was achieved designing practical size multipliers using the proposed methodology

To Develop and Implement Low Power, High Speed VLSI for Processing Signals using Multirate Techniques

Multirate technique is necessary for systems with different input and output sampling rates. Recent advances in mobile computing and communication applications demand low power and high speed VLSI DSP systems [4]. This Paper presents Multirate modules used for filtering to provide signal processing in wireless communication system. Many architecture developed for the design of low complexity, bit parallel Multiple Constant Multiplications operation which dominates the complexity of DSP systems. However, major drawbacks of present approaches are either too costly or not efficient enough. On the other hand, MCM and digit-serial adder offer alternative low complexity designs, since digit-serial architecture occupy less area and are independent of the data word length [1][10]. Multiple Constant Multiplications is efficient way to reduce the number of addition and subtraction in polyphase filter implementation. This Multirate design methodology is systematic and applicable to many problems. In this paper, attention has given to the MCM & digit serial architecture with shifting and adding techniques that offers alternative low complexity in operations. This paper also focused on Multirate Signal Processing Modules using Voltage and Technology scaling. Reduction of power consumption is important for VLSI system and also it becomes one of the most critical design parameter. Transistorized Multirate module which has full custom design with different circuit topology and optimization level simulated on cadence platform. Multirate modules are used AMI 0.6 um, TSMC 0.35 um, and TSMC 0.25 um technologies for different voltage scaling. The presented methodology provides a systematic way to derive circuit technique for high speed operation at a low supply voltage. Multirate polyphase interpolator and decimator are also designed and optimized at architectural level in order to analyze the terms power consumption, area and speed. DOI: 10.17762/ijritcc2321-8169.150314

Cascade: hardware for high/variable precision arithmetic

technical reportThe Cascade hardware architecture for high/variable precision arithmetic is described. It uses a radix-16 redundant signed-digit number representation and directly supports single or multiple precision addition, subtraction, multiplication, division, extraction of the square root and computation of the greatest common divisor. It is object-oriented and implements an abstract class of objects, variable precision integers. It provides a complete suite of memory management functions implemented in hardware, including a garbage collector. The Cascade hardware permits free tradeoffs of space versus time

Object-oriented domain specific compilers for programming FPGAs

Published versio

Area- Efficient VLSI Implementation of Serial-In Parallel-Out Multiplier Using Polynomial Representation in Finite Field GF(2m)

Finite field multiplier is mainly used in elliptic curve cryptography, error-correcting codes and signal processing. Finite field multiplier is regarded as the bottleneck arithmetic unit for such applications and it is the most complicated operation over finite field GF(2m) which requires a huge amount of logic resources. In this paper, a new modified serial-in parallel-out multiplication algorithm with interleaved modular reduction is suggested. The proposed method offers efficient area architecture as compared to proposed algorithms in the literature. The reduced finite field multiplier complexity is achieved by means of utilizing logic NAND gate in a particular architecture. The efficiency of the proposed architecture is evaluated based on criteria such as time (latency, critical path) and space (gate-latch number) complexity. A detailed comparative analysis indicates that, the proposed finite field multiplier based on logic NAND gate outperforms previously known resultsComment: 19 pages, 4 figure

Algorithms and VLSI architectures for parametric additive synthesis

A parametric additive synthesis approach to sound synthesis is advantageous as it can model sounds in a large scale manner, unlike the classical sinusoidal additive based synthesis paradigms. It is known that a large body of naturally occurring sounds are resonant in character and thus fit the concept well. This thesis is concerned with the computational optimisation of a super class of form ant synthesis which extends the sinusoidal parameters with a spread parameter known as band width. Here a modified formant algorithm is introduced which can be traced back to work done at IRCAM, Paris. When impulse driven, a filter based approach to modelling a formant limits the computational work-load. It is assumed that the filter's coefficients are fixed at initialisation, thus avoiding interpolation which can cause the filter to become chaotic. A filter which is more complex than a second order section is required. Temporal resolution of an impulse generator is achieved by using a two stage polyphase decimator which drives many filterbanks. Each filterbank describes one formant and is composed of sub-elements which allow variation of the formant’s parameters. A resource manager is discussed to overcome the possibility of all sub- banks operating in unison. All filterbanks for one voice are connected in series to the impulse generator and their outputs are summed and scaled accordingly. An explorative study of number systems for DSP algorithms and their architectures is investigated. I invented a new theoretical mechanism for multi-level logic based DSP. Its aims are to reduce the number of transistors and to increase their functionality. A review of synthesis algorithms and VLSI architectures are discussed in a case study between a filter based bit-serial and a CORDIC based sinusoidal generator. They are both of similar size, but the latter is always guaranteed to be stable