Automatic multi-camera extrinsic parameter calibration based on pedestrian torsors

Extrinsic camera calibration is essential for any computer vision task in a camera network. Typically, researchers place a calibration object in the scene to calibrate all the cameras in a camera network. However, when installing cameras in the field, this approach can be costly and impractical, especially when recalibration is needed. This paper proposes a novel, accurate and fully automatic extrinsic calibration framework for camera networks with partially overlapping views. The proposed method considers the pedestrians in the observed scene as the calibration objects and analyzes the pedestrian tracks to obtain extrinsic parameters. Compared to the state of the art, the new method is fully automatic and robust in various environments. Our method detect human poses in the camera images and then models walking persons as vertical sticks. We apply a brute-force method to determines the correspondence between persons in multiple camera images. This information along with 3D estimated locations of the top and the bottom of the pedestrians are then used to compute the extrinsic calibration matrices. We also propose a novel method to calibrate the camera network by only using the top and centerline of the person when the bottom of the person is not available in heavily occluded scenes. We verified the robustness of the method in different camera setups and for both single and multiple walking people. The results show that the triangulation error of a few centimeters can be obtained. Typically, it requires less than one minute of observing the walking people to reach this accuracy in controlled environments. It also just takes a few minutes to collect enough data for the calibration in uncontrolled environments. Our proposed method can perform well in various situations such as multi-person, occlusions, or even at real intersections on the street

Deep Probabilistic Models for Camera Geo-Calibration

The ultimate goal of image understanding is to transfer visual images into numerical or symbolic descriptions of the scene that are helpful for decision making. Knowing when, where, and in which direction a picture was taken, the task of geo-calibration makes it possible to use imagery to understand the world and how it changes in time. Current models for geo-calibration are mostly deterministic, which in many cases fails to model the inherent uncertainties when the image content is ambiguous. Furthermore, without a proper modeling of the uncertainty, subsequent processing can yield overly confident predictions. To address these limitations, we propose a probabilistic model for camera geo-calibration using deep neural networks. While our primary contribution is geo-calibration, we also show that learning to geo-calibrate a camera allows us to implicitly learn to understand the content of the scene

A Fast and Robust Extrinsic Calibration for RGB-D Camera Networks

From object tracking to 3D reconstruction, RGB-Depth (RGB-D) camera networks play an increasingly important role in many vision and graphics applications. Practical applications often use sparsely-placed cameras to maximize visibility, while using as few cameras as possible to minimize cost. In general, it is challenging to calibrate sparse camera networks due to the lack of shared scene features across different camera views. In this paper, we propose a novel algorithm that can accurately and rapidly calibrate the geometric relationships across an arbitrary number of RGB-D cameras on a network. Our work has a number of novel features. First, to cope with the wide separation between different cameras, we establish view correspondences by using a spherical calibration object. We show that this approach outperforms other techniques based on planar calibration objects. Second, instead of modeling camera extrinsic calibration using rigid transformation, which is optimal only for pinhole cameras, we systematically test different view transformation functions including rigid transformation, polynomial transformation and manifold regression to determine the most robust mapping that generalizes well to unseen data. Third, we reformulate the celebrated bundle adjustment procedure to minimize the global 3D reprojection error so as to fine-tune the initial estimates. Finally, our scalable client-server architecture is computationally efficient: the calibration of a five-camera system, including data capture, can be done in minutes using only commodity PCs. Our proposed framework is compared with other state-of-the-arts systems using both quantitative measurements and visual alignment results of the merged point clouds

Camera parameters estimation from pose detections

Some computer vision tasks become easier with known camera calibration. We propose a method for camera focal length, location and orientation estimation by observing human poses in the scene. Weak requirements to the observed scene make the method applicable to a wide range of scenarios. Our evaluation shows that even being trained only on synthetic dataset, the proposed method outperforms known solution. Our experiments show that using only human poses as the input also allows the proposed method to calibrate dynamic visual sensors

Vision-based Detection, Tracking and Classification of Vehicles using Stable Features with Automatic Camera Calibration

A method is presented for segmenting and tracking vehicles on highways using a camera that is relatively low to the ground. At such low angles, 3D perspective effects cause significant appearance changes over time, as well as severe occlusions by vehicles in neighboring lanes. Traditional approaches to occlusion reasoning assume that the vehicles initially appear well-separated in the image, but in our sequences it is not uncommon for vehicles to enter the scene partially occluded and remain so throughout. By utilizing a 3D perspective mapping from the scene to the image, along with a plumb line projection, a subset of features is identified whose 3D coordinates can be accurately estimated. These features are then grouped to yield the number and locations of the vehicles, and standard feature tracking is used to maintain the locations of the vehicles over time. Additional features are then assigned to these groups and used to classify vehicles as cars or trucks. The technique uses a single grayscale camera beside the road, processes image frames incrementally, works in real time, and produces vehicle counts with over 90% accuracy on challenging sequences. Adverse weather conditions are handled by augmenting feature tracking with a boosted cascade vehicle detector (BCVD). To overcome the need of manual camera calibration, an algorithm is presented which uses BCVD to calibrate the camera automatically without relying on any scene-specific image features such as road lane markings

An automated calibration method for non-see-through head mounted displays

Accurate calibration of a head mounted display (HMD) is essential both for research on the visual system and for realistic interaction with virtual objects. Yet, existing calibration methods are time consuming and depend on human judgements, making them error prone, and are often limited to optical see-through HMDs. Building on our existing approach to HMD calibration Gilson et al. (2008), we show here how it is possible to calibrate a non-see-through HMD. A camera is placed inside a HMD displaying an image of a regular grid, which is captured by the camera. The HMD is then removed and the camera, which remains fixed in position, is used to capture images of a tracked calibration object in multiple positions. The centroids of the markers on the calibration object are recovered and their locations re-expressed in relation to the HMD grid. This allows established camera calibration techniques to be used to recover estimates of the HMD display's intrinsic parameters (width, height, focal length) and extrinsic parameters (optic centre and orientation of the principal ray). We calibrated a HMD in this manner and report the magnitude of the errors between real image features and reprojected features. Our calibration method produces low reprojection errors without the need for error-prone human judgements

Understanding and ameliorating non-linear phase and amplitude responses in AMCW Lidar

Amplitude modulated continuous wave (AMCW) lidar systems commonly suffer from non-linear phase and amplitude responses due to a number of known factors such as aliasing and multipath inteference. In order to produce useful range and intensity information it is necessary to remove these perturbations from the measurements. We review the known causes of non-linearity, namely aliasing, temporal variation in correlation waveform shape and mixed pixels/multipath inteference. We also introduce other sources of non-linearity, including crosstalk, modulation waveform envelope decay and non-circularly symmetric noise statistics, that have been ignored in the literature. An experimental study is conducted to evaluate techniques for mitigation of non-linearity, and it is found that harmonic cancellation provides a significant improvement in phase and amplitude linearity

A Self-Calibration Method of Zooming Camera

In this article we proposed a novel approach to self- calibrate a camera with variable focal length. We show that the estimation of camera’s intrinsic parameters is possible from only two points of an unknown planar scene. The projection of these points by using the projection matrices in two images only permit us to obtain a system of equations according to the camera’s intrinsic parameters . From this system we formulated a nonlinear cost function which its minimization allows us to estimate the camera’s intrinsic parameters in each view. The results on synthetic and real data justify the robustness of our method in term of reliability and convergence