Multi-homing tunnel broker

A proper support for communications has to provide fault tolerance capabilities such as the preservation of established connections in case of failures. Multihoming addresses this issue, but the currently available solution based in massive BGP route injection presents serious scalability limitations, since it contributes to the exponential growth of the BGP table size. An alternative solution based on the configuration of tunnels between the multihomed site exit routers and the ISP border routers has been proposed for IPv6 in RFC 3178. However, the amount of manual configuration imposed by this solution on the ISP side prevents its wide adoption. In particular, this solution requires at the ISP the manual configuration of a tunnel endpoint per each multihomed client that it serves. We present a multihoming tunnel broker (MHTB) that provides automatic creation of the tunnel endpoint at the ISP side.This work was supported by the SAM (Advanced Servers with Mobility)project, funded by the Spanish National research and Development Programme as TIC2002-04531-C04-03.Publicad

State-of-the-Art Multihoming Protocols and Support for Android

Il traguardo più importante per la connettività wireless del futuro sarà sfruttare appieno le potenzialità offerte da tutte le interfacce di rete dei dispositivi mobili. Per questo motivo con ogni probabilità il multihoming sarà un requisito obbligatorio per quelle applicazioni che puntano a fornire la migliore esperienza utente nel loro utilizzo. Sinteticamente è possibile definire il multihoming come quel processo complesso per cui un end-host o un end-site ha molteplici punti di aggancio alla rete. Nella pratica, tuttavia, il multihoming si è rivelato difficile da implementare e ancor di più da ottimizzare. Ad oggi infatti, il multihoming è lontano dall’essere considerato una feature standard nel network deployment nonostante anni di ricerche e di sviluppo nel settore, poiché il relativo supporto da parte dei protocolli è quasi sempre del tutto inadeguato. Naturalmente anche per Android in quanto piattaforma mobile più usata al mondo, è di fondamentale importanza supportare il multihoming per ampliare lo spettro delle funzionalità offerte ai propri utenti. Dunque alla luce di ciò, in questa tesi espongo lo stato dell’arte del supporto al multihoming in Android mettendo a confronto diversi protocolli di rete e testando la soluzione che sembra essere in assoluto la più promettente: LISP. Esaminato lo stato dell’arte dei protocolli con supporto al multihoming e l’architettura software di LISPmob per Android, l’obiettivo operativo principale di questa ricerca è duplice: a) testare il roaming seamless tra le varie interfacce di rete di un dispositivo Android, il che è appunto uno degli obiettivi del multihoming, attraverso LISPmob; e b) effettuare un ampio numero di test al fine di ottenere attraverso dati sperimentali alcuni importanti parametri relativi alle performance di LISP per capire quanto è realistica la possibilità da parte dell’utente finale di usarlo come efficace soluzione multihoming

Delay-centric handover in SCTP

The introduction of the Stream Control Transmission Protocol (SCTP) has opened the possibility of a mobile aware transport protocol. The multihoming feature of SCTP negates the need for a solution such as Mobile IP and, as SCTP is a transport layer protocol, it adds no complexity to the network. Utilizing the handover procedure of SCTP, the large bandwidth of WLAN can be exploited whilst in the coverage of a hotspot, and still retain the 3G connection for when the user roams out of the hotspot’s range. All this functionality is provided at the transport layer and is transparent to the end user, something that is still important in non-mobile-aware legacy applications. However, there is one drawback to this scenario - the current handover scheme implemented in SCTP is failure-centric in nature. Handover is only performed in the presence of primary destination address failure. This dissertation proposes a new scheme for performing handover using SCTP. The handover scheme being proposed employs an aggressive polling of all destination addresses within an individual SCTP association in order to determine the round trip delay to each of these addresses. It then performs handover based on these measured path delays. This delay-centric approach does not incur the penalty associated with the current failover-based scheme, namely a number of timeouts before handover is performed. In some cases the proposed scheme can actually preempt the path failure, and perform handover before it occurs. The proposed scheme has been evaluated through simulation, emulation, and within the context of a wireless environment

Raising the Datagram API to Support Transport Protocol Evolution

Some application developers can wield huge resources to build new transport protocols, for these developers the present UDP Socket API is perfectly fine. They have access to large test beds and sophisticated tools. Many developers do not have these resources. This paper presents a new high-level Datagram API that is for everyone else, this has an advantage of offering a clear evolutionary path to support new requirements. This new API is needed to move forward the base of the system, allowing developers with limited resources to evolve their applications while accessing new network services

SIGMA: A mobility architecture for terrestrial and space networks.

Internet Protocol (IP) mobility can be handled at different layers of the protocol stack. Mobile IP has been developed to handle mobility of Internet hosts at the network layer. Mobile IP suffers from a number of drawbacks such as the requirement for infrastructure change, high handover latency, high packet loss rate, and conflict with network security solutions. As an alternative solution, a few transport layer mobility protocols have been proposed in the context of Transmission Control Protocol (TCP), for example, MSOCKS and TCP connection migration. In this dissertation, a S&barbelow; eamless I&barbelow; P-diversity-based G&barbelow; eneralized M&barbelow; obility Architecture (SIGMA) is described. SIGMA works at the transport layer and utilizes IP diversity to achieve seamless handover, and is designed to solve many of the drawbacks of Mobile IP. It can also cooperate with normal IPv4 or IPv6 infrastructure without the support of Mobile IP. The handover performance, signaling cost, and survivability issues of SIGMA are evaluated and compared with those of Mobile IP. A hierarchical location management scheme for SIGMA is developed to reduce the signaling cost of SIGMA, which is also useful to other transport layer mobility solutions. SIGMA is shown to be also applicable to managing satellite handovers in space. Finally, the interoperability between SIGMA and existing Internet security mechanisms is discussed

Performance Evaluation of TCP Multihoming for IPV6 Anycast Networks and Proxy Placement

In this thesis, the impact of multihomed clients and multihomed proxy servers on the performance of modern networks is investigated. The network model used in our investigation integrates three main components: the new one-to-any Anycast communication paradigm that facilitates server replication, the next generation Internet Protocol Version 6 (IPv6) that offers larger address space for packet switched networks, and the emerging multihoming trend of connecting devices and smart phones to more than one Internet service provider thereby acquiring more than one IP address. The design of a previously proposed Proxy IP Anycast service is modified to integrate user device multihoming and Ipv6 routing. The impact of user device multihoming (single-homed, dual-homed, and triple-homed) on network performance is extensively analyzed using realistic network topologies and different traffic scenarios of client-server TCP flows. Network throughput, packet latency delay and packet loss rate are the three performance metrics used in our analysis. Performance comparisons between the Anycast Proxy service and the native IP Anycast protocol are presented. The number of Anycast proxy servers and their placement are studied. Five placement methods have been implemented and evaluated including random placement, highest traffic placement, highest number of active interface placements, K-DS placement and a new hybrid placement method. The work presented in this thesis provides new insight into the performance of some new emerging communication paradigms and how to improve their design. Although the work has been limited to investigating Anycast proxy servers, the results can be beneficial and applicable to other types of overlay proxy services such as multicast proxies