Innovative teaching of IC design and manufacture using the Superchip platform

In this paper we describe how an intelligent chip architecture has allowed a large cohort of undergraduate students to be given effective practical insight into IC design by designing and manufacturing their own ICs. To achieve this, an efficient chip architecture, the “Superchip”, has been developed, which allows multiple student designs to be fabricated on a single IC, and encapsulated in a standard package without excessive cost in terms of time or resources. We demonstrate how the practical process has been tightly coupled with theoretical aspects of the degree course and how transferable skills are incorporated into the design exercise. Furthermore, the students are introduced at an early stage to the key concepts of team working, exposure to real deadlines and collaborative report writing. This paper provides details of the teaching rationale, design exercise overview, design process, chip architecture and test regime

CMOS VLSI correlator design for radio-astronomical signal processing : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Engineering at Massey University, Auckland, New Zealand

Multi-element radio telescopes employ methods of indirect imaging to capture the image of the sky. These methods are in contrast to direct imaging methods whereby the image is constructed from sensor measurements directly and involve extensive signal processing on antenna signals. The Square Kilometre Array, or the SKA, is a future radio telescope of this type that, once built, will become the largest telescope in the world. The unprecedented scale of the SKA requires novel solutions to be developed for its signal processing pipeline one of the most resource-consuming parts of which is the correlator. The SKA uses the FX correlator construction that consists of two parts: the F part that translates antenna signals into frequency domain and the X part that cross-correlates these signals between each other. This research focuses on the integrated circuit design and VLSI implementation issues of the X part of a very large FX correlator in 28 nm and 130 nm CMOS. The correlator’s main processing operation is the complex multiply-accumulation (CMAC) for which custom 28 nm CMAC designs are presented and evaluated. Performance of various memories inside the correlator also affects overall efficiency, and input-buffered and output-buffered approaches are considered with the goal of improving upon it. For output-buffered designs, custom memory control circuits have been designed and prototyped in 130 nm that improve upon eDRAM by taking advantage of sequential access patterns. For the input-buffered architecture, a new scheme is proposed that decreases the usage of the input-buffer memory by a third by making use of multiple accumulators in every CMAC. Because cross-correlation is a very data-intensive process, high-performance SerDes I/O is essential to any practical ASIC implementation. On the I/O design, the 28 nm full-rate transmitter delivering 15 Gbps per lane is presented. This design consists of the scrambler, the serialiser, the digital VCO with analog fine-tuning and the SST driver including features of a 4-tap FFE, impedance tuning and amplitude tuning

Spike-based VITE control with Dynamic Vision Sensor applied to an Arm Robot.

Spike-based motor control is very important in the field of robotics and also for the neuromorphic engineering community to bridge the gap between sensing / processing devices and motor control without losing the spike philosophy that enhances speed response and reduces power consumption. This paper shows an accurate neuro-inspired spike-based system composed of a DVS retina, a visual processing system that detects and tracks objects, and a SVITE motor control, where everything follows the spike-based philosophy. The control system is a spike version of the neuroinspired open loop VITE control algorithm implemented in a couple of FPGA boards: the first one runs the algorithm and the second one drives the motors with spikes. The robotic platform is a low cost arm with four degrees of freedom.Ministerio de Ciencia e Innovación TEC2009-10639-C04-02/01Ministerio de Economía y Competitividad TEC2012-37868-C04-02/0

VLSI architecture for a Reed-Solomon decoder

A basic single-chip building block for a Reed-Solomon (RS) decoder system is partitioned into a plurality of sections, the first of which consists of a plurality of syndrome subcells each of which contains identical standard-basis finite-field multipliers that are programmable between 10 and 8 bit operation. A desired number of basic building blocks may be assembled to provide a RS decoder of any syndrome subcell size that is programmable between 10 and 8 bit operation

A 1.6 Gb/s, 3 mW CMOS receiver for optical communication

A 1.6 Gb/s receiver for optical communication has been designed and fabricated in a 0.25-μm CMOS process. This receiver has no transimpedance amplifier and uses the parasitic capacitor of the flip-chip bonded photodetector as an integrating element and resolves the data with a double-sampling technique. A simple feedback loop adjusts a bias current to the average optical signal, which essentially "AC couples" the input. The resulting receiver resolves an 11 μA input, dissipates 3 mW of power, occupies 80 μm x 50 μm of area and operates at over 1.6 Gb/s

A 100-MIPS GaAs asynchronous microprocessor

The authors describe how they ported an asynchronous microprocessor previously implemented in CMOS to gallium arsenide, using a technology-independent asynchronous design technique. They introduce new circuits including a sense-amplifier, a completion detection circuit, and a general circuit structure for operators specified by production rules. The authors used and tested these circuits in a variety of designs

Modified Level Restorers Using Current Sink and Current Source Inverter Structures for BBL-PT Full Adder

Full adder is an essential component for the design and development of all types of processors like digital signal processors (DSP), microprocessors etc. In most of these systems adder lies in the critical path that affects the overall speed of the system. So enhancing the performance of the 1-bit full adder cell is a significant goal. In this paper, we proposed two modified level restorers using current sink and current source inverter structures for branch-based logic and pass-transistor (BBL-PT) full adder [1]. In BBL-PT full adder, there lies a drawback i.e. voltage step existence that could be eliminated in the proposed logics by using the current sink inverter and current source inverter structures. The proposed full adders are compared with the two standard and well-known logic styles, i.e. conventional static CMOS logic and Complementary Pass transistor Logic (CPL), demonstrated the good delay performance. The implementation of 8-bit ripple carry adder based on proposed full adders are finally demonstrated. The CPL 8-bit RCA and as well as the proposed ones is having better delay performance than the static CMOS and BBL-PT 8-bit RCA. The performance of the proposed BBL-PT cell with current sink & current source inverter structures are examined using PSPICE and the model parameters of a 0.13 µm CMOS process

Testability enhancement of a basic set of CMOS cells

Testing should be evaluated as the ability of the test patterns to cover realistic faults, and high quality IC products demand high quality testing. We use a test strategy based on physical design for testability (to discover both open and short faults, which are difficult or even impossible to detect). Consequentially, layout level design for testability (LLDFT) rules have been developed, which prevent the faults, or at least reduce the chance of their appearing. The main purpose of this work is to apply a practical set of LLDFT rules to the library cells designed by the Centre Nacional de Microelectrònica (CNM) and obtain a highly testable cell library. The main results of the application of the LLDFT rules (area overheads and performance degradation) are summarized and the results are significant since IC design is highly repetitive; a small effort to improve cell layout can bring about great improvement in design