Multiservice capacity and interference statistics of the uplink of high altitude platforms (HAPs) for asynchronous and synchronous WCDMA system

In this work, the capacity and the interference statistics of the uplink of high-altitude platforms (HAPs) for asynchronous and synchronous WCDMA system assuming finite transmission power and imperfect power control are studied. Propagation loss used to calculate the received signal power is due to the distance, shadowing, and wall insertion loss. The uplink capacity for 3- and 3.75-G services is given for different cell radius assuming outdoor and indoor voice users only, data users only and a combination of the two services. For 37 macrocells HAP, the total uplink capacity is 3,034 outdoor voice users or 444 outdoor data users. When one or more than one user is an indoor user, the uplink capacity is 2,923 voice users or 444 data users when the walls entry loss is 10 dB. It is shown that the effect of the adjacent channels interference is very small

Implementation Aspects of UMTS 900 MHz/2100 MHz for High Altitude Platforms

Projecte realitzat en col.laboració amb el centre Tampere University of TechnologyHigh Altitude Platforms (HAPs) represent an alternative to terrestrial mobile telecommunications. The aim of HAPs is to offer a feasible solution for the radio access layer of this kind of networks. The strong point of HAPs resides in the fact that they bring together the best features of terrestrial and satellite systems. HAPs have been widely proposed for deploying telecommunication services such as third generation mobile networks. In Europe, third generation of mobile communications system is using UMTS. It has being widely deployed in the last years but still there are certain areas where 3G coverage is not available. Especially in rural areas with low population density, where the operators did not find a cost efficient way to deploy UMTS services. As a result, UMTS in 900 MHz band emerges as a possible way to improve UMTS coverage for these areas, and combining with a HAP-based deployment, a cost efficient way for a widely deployment in sparsely populated and remote areas for 3G services. The work shown in this thesis is a comparison of network simulations obtained from the use of HAPs in the radio access network of UMTS using 900 MHz band and 2100 MHz band. The study was aimed to find the impact of carrier frequency on coverage for a single HAP scenario using different deployment strategies. An antenna study has also been done in order to see the impact of antenna beamwidth on UMTS system. The results obtained reveal that the decrease in the carrier frequency caused a clear increase in the coverage, when correct distance between cells was selected. Consequently the results obtained show the variation of the network performance with the separation between cells using both carrier frequencies, 2100 MHz and 900 MHz

Coexistence of Terrestrial and HAP 3G Networks during Disaster Scenarios

The aim of this paper is to show the possible coexistence of an HAP and a terrestrial component of 3G networks at a single carrier frequency. The main goal is to compare the basic parameters of terrestrial and HAP com-ponent 3G networks modeled in suburban (macrocell) and urban (macro/microcell) areas and to demonstrate the way they impact on each other. This study should present what we assume are the better capabilities of HAP 3G networks compared to their terrestrial counterparts. The parameters of the HAP and terrestrial component of 3G networks, were the terrestrial cells to be disabled during disasters, are also presented

Provision of 3G Mobile Services in Sparsely Populated Areas Using High Altitude Platforms

This paper deals with the application of High Altitude Platforms for the provision of third generation mobile services in sparsely-populated areas or in developing countries. It focuses on the behavior of large cells provided via a multiple HAP deployment and shows the possibilities of using small cells located inside these large cells to serve hot-spot areas. The impact of the different types of HAP antenna masks and their adjustment on cell capacity and the quality of coverage is presented. The main parameter of the antenna radiation pattern under investigation is the power roll-off at the cell edge. Optimal values of this parameter are presented for different scenarios. Simulations of system level parameters were based on an iteration loops approach

Modeling the Use of an Airborne Platform for Cellular Communications Following Disruptions

In the wake of a disaster, infrastructure can be severely damaged, hampering telecommunications. An Airborne Communications Network (ACN) allows for rapid and accurate information exchange that is essential for the disaster response period. Access to information for survivors is the start of returning to self-sufficiency, regaining dignity, and maintaining hope. Real-world testing has proven that such a system can be built, leading to possible future expansion of features and functionality of an emergency communications system. Currently, there are no airborne civilian communications systems designed to meet the demands of the public following a natural disaster. A system allowing even a limited amount of communications post-disaster is a great improvement on the current situation, where telecommunications are frequently not available. It is technically feasible to use an airborne, wireless, cellular system quickly deployable to disaster areas and configured to restore some of the functions of damaged terrestrial telecommunications networks. The system requirements were presented, leading to the next stage of the planned research, where a range of possible solutions were examined. The best solution was selected based on the earlier, predefined criteria. The system was modeled, and a test ii system built. The system was tested and redesigned when necessary, to meet the requirements. The research has shown how the combination of technology, especially the recent miniaturizations and move to open source software for cellular network components can allow sophisticated cellular networks to be implemented. The ACN system proposed could enable connectivity and reduce the communications problems that were experienced following Hurricane Sandy and Katrina. Experience with both natural and man-made disasters highlights the fact that communications are useful only to the extent that they are accessible and useable by the population

Mobile and Wireless Communications

Mobile and Wireless Communications have been one of the major revolutions of the late twentieth century. We are witnessing a very fast growth in these technologies where mobile and wireless communications have become so ubiquitous in our society and indispensable for our daily lives. The relentless demand for higher data rates with better quality of services to comply with state-of-the art applications has revolutionized the wireless communication field and led to the emergence of new technologies such as Bluetooth, WiFi, Wimax, Ultra wideband, OFDMA. Moreover, the market tendency confirms that this revolution is not ready to stop in the foreseen future. Mobile and wireless communications applications cover diverse areas including entertainment, industrialist, biomedical, medicine, safety and security, and others, which definitely are improving our daily life. Wireless communication network is a multidisciplinary field addressing different aspects raging from theoretical analysis, system architecture design, and hardware and software implementations. While different new applications are requiring higher data rates and better quality of service and prolonging the mobile battery life, new development and advanced research studies and systems and circuits designs are necessary to keep pace with the market requirements. This book covers the most advanced research and development topics in mobile and wireless communication networks. It is divided into two parts with a total of thirty-four stand-alone chapters covering various areas of wireless communications of special topics including: physical layer and network layer, access methods and scheduling, techniques and technologies, antenna and amplifier design, integrated circuit design, applications and systems. These chapters present advanced novel and cutting-edge results and development related to wireless communication offering the readers the opportunity to enrich their knowledge in specific topics as well as to explore the whole field of rapidly emerging mobile and wireless networks. We hope that this book will be useful for students, researchers and practitioners in their research studies

MODELS FOR GREENFIELD AND INCREMENTAL CELLULAR NETWORK PLANNING

Mobility, as provided in cellular networks, is largely affected by the location of the base stations. To a large extent, the location of base stations is determined by the quantity of base stations available to provide coverage. It is therefore not surprising that the quantity and subsequent location of base stations will not only impact service delivery but also have a large associated cost for implementation. Generally, the higher the quantity of base stations required to provide coverage, the greater the cost of implementation and operation of the radio network. This thesis proposes a modified optimization model to aid the cell planning process. This model, unlike those surveyed, is applicable to both green field and incremental network designs. The variation in model design is fundamental in ensuring cost effective growth and expansion of cellular networks. Numerical studies of the modified model applied to both abstract and real system configurations are carried out using MATLAB. Terrain data from Kampala, Uganda, was used to aid the study. Results show that the antenna height significantly determines the solution of the objective function. In addition, it is shown that slight variations in the cost association between the antenna height and the site construction requirements can be decisively used for predefined targeted network planning. A comparison is also made between an actual network installation and the estimates provided by the model. As expected, results from the study show that the difference between the estimated count and the actual count can be adEquately minimized by slight variations in antenna height requirements