2,247 research outputs found

    Hotspot wireless LANs to enhance the performance of 3G and beyond cellular networks

    Get PDF

    EVEREST IST - 2002 - 00185 : D23 : final report

    Get PDF
    Deliverable públic del projecte europeu EVERESTThis deliverable constitutes the final report of the project IST-2002-001858 EVEREST. After its successful completion, the project presents this document that firstly summarizes the context, goal and the approach objective of the project. Then it presents a concise summary of the major goals and results, as well as highlights the most valuable lessons derived form the project work. A list of deliverables and publications is included in the annex.Postprint (published version

    Baseband analog front-end and digital back-end for reconfigurable multi-standard terminals

    Get PDF
    Multimedia applications are driving wireless network operators to add high-speed data services such as Edge (E-GPRS), WCDMA (UMTS) and WLAN (IEEE 802.11a,b,g) to the existing GSM network. This creates the need for multi-mode cellular handsets that support a wide range of communication standards, each with a different RF frequency, signal bandwidth, modulation scheme etc. This in turn generates several design challenges for the analog and digital building blocks of the physical layer. In addition to the above-mentioned protocols, mobile devices often include Bluetooth, GPS, FM-radio and TV services that can work concurrently with data and voice communication. Multi-mode, multi-band, and multi-standard mobile terminals must satisfy all these different requirements. Sharing and/or switching transceiver building blocks in these handsets is mandatory in order to extend battery life and/or reduce cost. Only adaptive circuits that are able to reconfigure themselves within the handover time can meet the design requirements of a single receiver or transmitter covering all the different standards while ensuring seamless inter-interoperability. This paper presents analog and digital base-band circuits that are able to support GSM (with Edge), WCDMA (UMTS), WLAN and Bluetooth using reconfigurable building blocks. The blocks can trade off power consumption for performance on the fly, depending on the standard to be supported and the required QoS (Quality of Service) leve

    Wireless internet architecture and testbed for wineglass

    Get PDF
    One of the most challenging issues in the area of mobile communication is the deployment of IPbased wireless multimedia networks in public and business environments. The public branch may involve public mobile networks, like UMTS as 3G system, while the business branch introduces local radio access networks by means of W-LANs. Conventional mobile networks realise mobile specific functionality, e.g. mobility management or authentication and accounting, by implementing appropriate mechanisms in specific switching nodes (e.g. SGSN in GPRS). In order to exploit the full potential of IP networking solutions a replacement of these mechanisms by IP-based solutions might be appropriate. In addition current and innovative future services in mobile environments require at least soft-guaranteed, differentiated QoS. Therefore the WINE GLASS project investigates and implements enhanced IP-based techniques supporting mobility and QoS in a wireless Internet architecture. As a means to verify the applicability of the implemented solutions, location-aware services deploying both IP-mobility and QoS mechanisms will be implemented and demonstratedPeer ReviewedPostprint (published version

    Efficient Handoff for QoS Enhancement in Heterogeneous Wireless Networks (UMTS/WLAN Interworking)

    Get PDF
    Today’s Wireless Communications technologies prove us that wireless communications will in the long run be composed of different communication networks as a way to benefit from each other. This can however be achieved from cellular networks and wireless local area networks that show some compatible characteristics that enable them be integrated. Scenarios typically behind these integrations is the UMTS and WLAN interworking where UMTS network is known for its wide area of coverage and nearly roaming however, known for lack of enough data rate. This is contrary with WLAN which is known for high data rate and cheaper compared to UMTS. WLAN however has a small area of coverage and lacks roaming. This in regard brings the idea that the two different networks being integrated could provide the means for mobile users to be gratified with a supported coverage and quality at anywhere and anytime with seamless access to internet

    WLAN-UMTS integration to optimize MBMS provision

    Get PDF
    Provision of multimedia services with high bandwidth demands is constantly increasing its share in mobile systems. Aiming a more efficient distribution of multicast/broadcast contents in the UMTS networks, 3GPP introduced the Multimedia Broadcast Multicast Service (MBMS). Even though this technology brought significant improvements regarding the network efficiency, the UTRAN (UMTS Terrestrial Radio Access Network) remains the network’s most vulnerable area due to its shortage resources. The integration of wireless LAN (WLAN) access technology in cellular data networks to enhance their services coverage and increase data rates, is an extremely interesting solution for operators. In addition, this solution based on WLAN is easily deployed and can provide additional license-free bandwidth. Therefore, this paper addresses a possible WLAN integration, which uses a UMTS Access Point (UAP) that establishes a WLAN tunnel to provide MBMS data services to UEs with both UMTS and WLAN interfaces. Using this simulation environment, we pretend to measure and conclude about the benefits achieved from merging these two access technologies when delivering MBMS services.info:eu-repo/semantics/acceptedVersio
    corecore