QoS-Balancing Algorithm for Optimal Relay Selection in Heterogeneous Vehicular Networks

Intelligent Transportation System (ITS) could facilitate communications among various road entities to improve the driver's safety and driving experience. These communications are called Vehicle-to-Everything (V2X) communications that can be supported by LTE-V2X protocols. Due to frequent changes of network topology in V2X, the source node (e.g., a vehicle) may have to choose a Device-to-Device(D2D) relay node to forward its packet to the destination node. In this paper, we propose a new method for choosing an optimal D2D relay node. The proposed method considers Quality of Service (QoS) requirements for selecting D2D relay nodes. It employs an Analytic Hierarchy Process (AHP) for making decisions. The decision criteria are linked with channel capacity, link stability and end-to-end delay. A number of simulations were performed considering various network scenarios to evaluate the performance of the proposed method. Simulation results show that the proposed method improves Packet Dropping Rate (PDR) by 30% and delivery ratio by 23% in comparison with the existing methods

Fog Connectivity Clustering and MDP Modeling for Software-defined Vehicular Networks

Intelligent and networked vehicles cooperate to create a mobile Cloud through vehicular Fog computing (VFC). Such clouds rely heavily on the underlying vehicular networks, so estimating communication resilience allows to address the problems caused by intermittent vehicle connectivity for data transfers. Individually estimating the communication stability of vehicles, nevertheless, undergoes incorrect predictions due to their particular mobility patterns. Therefore, we provide a region-oriented fog management model based on the connectivity through vehicular heterogeneous network environment via V2X and C-V2X. A fog management strategy dynamically monitors nearby vehicles to determine distinct regions in urban centres. The model enables a software-defined vehicular network (\Gls{SDVN}) controller to coordinate data flows. The vehicular connectivity described by our model assesses the potential for vehicle communication and conducts dynamic vehicle clustering. From the stochasticity of the environment, our model is based on Markov Decision Process (MDP), tracking the status of vehicle clusters and their potential for provisioning services. The model for vehicular clustering is supported by 5G and DSRC heterogeneous networks. Simulated analyses have shown the capability of our proposed model to estimate cluster reliability in real-time urban scenarios and support effective vehicular fog management

Comunicações veiculares híbridas

Vehicle Communications is a promising research field, with a great potential for the development of new applications capable of improving road safety, traffic efficiency, as well as passenger comfort and infotainment. Vehicle communication technologies can be short-range, such as ETSI ITS-G5 or the 5G PC5 sidelink channel, or long-range, using the cellular network (LTE or 5G). However, none of the technologies alone can support the expected variety of applications for a large number of vehicles, nor all the temporal and spatial requirements of connected and autonomous vehicles. Thus, it is proposed the collaborative or hybrid use of short-range communications, with lower latency, and of long-range technologies, potentially with higher latency, but integrating aggregated data of wider geographic scope. In this context, this work presents a hybrid vehicle communications model, capable of providing connectivity through two Radio Access Technologies (RAT), namely, ETSI ITS-G5 and LTE, to increase the probability of message delivery and, consequently, achieving a more robust, efficient and secure vehicle communication system. The implementation of short-range communication channels is done using Raw Packet Sockets, while the cellular connection is established using the Advanced Messaging Queuing Protocol (AMQP) protocol. The main contribution of this dissertation focuses on the design, implementation and evaluation of a Hybrid Routing Sublayer, capable of isolating messages that are formed/decoded from transmission/reception processes. This layer is, therefore, capable of managing traffic coming/destined to the application layer of intelligent transport systems (ITS), adapting and passing ITS messages between the highest layers of the protocol stack and the available radio access technologies. The Hybrid Routing Sublayer also reduces the financial costs due to the use of cellular communications and increases the efficiency of the use of the available electromagnetic spectrum, by introducing a cellular link controller using a Beacon Detector, which takes informed decisions related to the need to connect to a cellular network, according to different scenarios. The experimental results prove that hybrid vehicular communications meet the requirements of cooperative intelligent transport systems, by taking advantage of the benefits of both communication technologies. When evaluated independently, the ITS-G5 technology has obvious advantages in terms of latency over the LTE technology, while the LTE technology performs better than ITS-G5, in terms of throughput and reliability.As Comunicações Veiculares são um campo de pesquisa promissor, com um grande potencial de desenvolvimento de novas aplicações capazes de melhorar a segurança nas estradas, a eficiência do tráfego, bem com o conforto e entretenimento dos passageiros. As tecnologias de comunicação veícular podem ser de curto alcance, como por exemplo ETSI ITS-G5 ou o canal PC5 do 5G, ou de longo alcance, recorrendo à rede celular (LTE ou 5G). No entanto, nenhuma das tecnologias por si só, consegue suportar a variedade expectável de aplicações para um número de veículos elevado nem tampouco todos os requisitos temporais e espaciais dos veículos conectados e autónomos. Assim, é proposto o uso colaborativo ou híbrido de comunicações de curto alcance, com latências menores, e de tecnologias de longo alcance, potencialmente com maiores latências, mas integrando dados agregados de maior abrangência geográfica. Neste contexto, este trabalho apresenta um modelo de comunicações veiculares híbrido, capaz de fornecer conectividade por meio de duas Tecnologias de Acesso por Rádio (RAT), a saber, ETSI ITS-G5 e LTE, para aumentar a probabilidade de entrega de mensagens e, consequentemente, alcançar um sistema de comunicação veicular mais robusto, eficiente e seguro. A implementação de canais de comunicação de curto alcance é feita usando Raw Packet Sockets, enquanto que a ligação celular é estabelecida usando o protocolo Advanced Messaging Queuing Protocol (AMQP). A contribuição principal desta dissertação foca-se no projeto, implementação e avaliação de uma sub camada hibrída de encaminhamento, capaz de isolar mensagens que se formam/descodificam a partir de processos de transmissão/receção. Esta camadada é, portanto, capaz de gerir o tráfego proveniente/destinado à camada de aplicação de sistemas inteligentes de transportes (ITS) adaptando e passando mensagens ITS entre as camadas mais altas da pilha protocolar e as tecnologias de acesso rádio disponíveis. A sub camada hibrída de encaminhamento também potencia uma redução dos custos financeiros devidos ao uso de comunicações celulares e aumenta a eficiência do uso do espectro electromagnético disponível, ao introduzir um múdulo controlador da ligação celular, utilizando um Beacon Detector, que toma decisões informadas relacionadas com a necessidade de uma conexão a uma rede celular, de acordo com diferentes cenários. Os resultados experimentais comprovam que as comunicações veículares híbridas cumprem os requisitos dos sistemas cooperativos de transporte inteligentes, ao tirarem partido das vantagens de ambas tecnologias de comunicação. Quando avaliadas de forma independente, constata-se que que a tecnologia ITS-G5 tem vantagens evidentes em termos de latência sobre a tecnologia LTE, enquanto que a tecnologia LTE tem melhor desempenho que a LTE, ai nível de débito e fiabilidade.Mestrado em Engenharia Eletrónica e Telecomunicaçõe

A comprehensive survey of V2X cybersecurity mechanisms and future research paths

Recent advancements in vehicle-to-everything (V2X) communication have notably improved existing transport systems by enabling increased connectivity and driving autonomy levels. The remarkable benefits of V2X connectivity come inadvertently with challenges which involve security vulnerabilities and breaches. Addressing security concerns is essential for seamless and safe operation of mission-critical V2X use cases. This paper surveys current literature on V2X security and provides a systematic and comprehensive review of the most relevant security enhancements to date. An in-depth classification of V2X attacks is first performed according to key security and privacy requirements. Our methodology resumes with a taxonomy of security mechanisms based on their proactive/reactive defensive approach, which helps identify strengths and limitations of state-of-the-art countermeasures for V2X attacks. In addition, this paper delves into the potential of emerging security approaches leveraging artificial intelligence tools to meet security objectives. Promising data-driven solutions tailored to tackle security, privacy and trust issues are thoroughly discussed along with new threat vectors introduced inevitably by these enablers. The lessons learned from the detailed review of existing works are also compiled and highlighted. We conclude this survey with a structured synthesis of open challenges and future research directions to foster contributions in this prominent field.This work is supported by the H2020-INSPIRE-5Gplus project (under Grant agreement No. 871808), the ”Ministerio de Asuntos Económicos y Transformacion Digital” and the European Union-NextGenerationEU in the frameworks of the ”Plan de Recuperación, Transformación y Resiliencia” and of the ”Mecanismo de Recuperación y Resiliencia” under references TSI-063000-2021-39/40/41, and the CHIST-ERA-17-BDSI-003 FIREMAN project funded by the Spanish National Foundation (Grant PCI2019-103780).Peer ReviewedPostprint (published version

A Novel Energy-Efficient Reservation System for Edge Computing in 6G Vehicular Ad Hoc Network

The roadside unit (RSU) is one of the fundamental components in a vehicular ad hoc network (VANET), where a vehicle communicates in infrastructure mode. The RSU has multiple functions, including the sharing of emergency messages and the updating of vehicles about the traffic situation. Deploying and managing a static RSU (sRSU) requires considerable capital and operating expenditures (CAPEX and OPEX), leading to RSUs that are sparsely distributed, continuous handovers amongst RSUs, and, more importantly, frequent RSU interruptions. At present, researchers remain focused on multiple parameters in the sRSU to improve the vehicle-to-infrastructure (V2I) communication; however, in this research, the mobile RSU (mRSU), an emerging concept for sixth-generation (6G) edge computing vehicular ad hoc networks (VANETs), is proposed to improve the connectivity and efficiency of communication among V2I. In addition to this, the mRSU can serve as a computing resource for edge computing applications. This paper proposes a novel energy-efficient reservation technique for edge computing in 6G VANETs that provides an energy-efficient, reservation-based, cost-effective solution by introducing the concept of the mRSU. The simulation outcomes demonstrate that the mRSU exhibits superior performance compared to the sRSU in multiple aspects. The mRSU surpasses the sRSU with a packet delivery ratio improvement of 7.7%, a throughput increase of 5.1%, a reduction in end-to-end delay by 4.4%, and a decrease in hop count by 8.7%. The results are generated across diverse propagation models, employing realistic urban scenarios with varying packet sizes and numbers of vehicles. However, it is important to note that the enhanced performance parameters and improved connectivity with more nodes lead to a significant increase in energy consumption by 2%