Fiber waveguide sensors for intelligent materials

This report, an addendum to the six month report submitted to NASA Langley Research Center in December 1987, covers research performed by the Fiber and Electro-Optics Research Center (FEORC) at Virginia Tech for the NASA Langley Research Center, Grant NAG1-780, for the period from December 1987 to June 1988. This final report discusses the research performed in the following four areas as described in the proposal: Fabrication of Sensor Fibers Optimized for Embedding in Advanced Composites; Fabrication of Sensor Fiber with In-Line Splices and Evaluation via OTR methods; Modal Domain Optical Fiber Sensor Analysis; and Acoustic Fiber Waveguide Implementation

Ultrasonic thickness structural health monitoring of steel pipe for internal corrosion

The naphthenic acid corrosion that can occur in oil refinery process plants at high temperature (400ÃÂðC) due to the corrosive nature of certain crude oils during the refining process can be difficult to predict. Therefore, the development of online ultrasonic thickness (UT) structural health monitoring (SHM) technology for high temperature internal pitting corrosion of steel pipe is of interest. A sensor produced by the sol-gel ceramic fabrication process has the potential to be deployed to monitor such pitting corrosion, and to help investigate the mechanisms causing such corrosion. This thick-film transducer is first characterized using an electric circuit model. The propagating elastic waves generated by the transducer are then experimentally characterized using the dynamic photoelastic visualization method and images of the wave-field are compared with semi-analytical modeling results. Next, the classic elastic wave scattering theory for an embedded spherical cavity is reviewed, results are compared with a newer scattering theory from the seismology community, that has been applied to a hemispherical pit geometry. This hemispherical pit theory is extended so as to describe ultrasonic Non-Destructive Evaluation (NDE) applications, for pitting corrosion, with the derivation of a far-field scattering amplitude term. Data from this new scattering theory is compared with experimental results by applying principals from the Thompson-Gray measurement model. The initial model validation provides the basis for a possible new hemispherical pit geometric reference standard for ultrasonic NDE corrosion applications. Next, UT SHM measurement accuracy, precision, and reliability are described with a new weighted censored relative likelihood methodology to consider the propagation of asymmetric uncertainty in quantifying thickness measurement error. This new statistical method is experimentally demonstrated and applied to thickness measurement data obtained in pulse-echo and pitch-catch configurations for various time-of-flight thickness calculation methods. Finally, the plastic behavior of a corroded steel pipe is modeled with analytical and finite element methods to generate prognosis information

Development of a high-sensitivity and adjustable FBG strain sensor for structural monitoring

In this paper, a new fiber Bragg grating (FBG ) strain sensor with adjustable sensitivity is invented. The sensitivity adjustment, strain sensing, and temperature compensation principles of the sensor and the corresponding formulae are developed. The prototype sensor specimen is developed, and a series of tests are performed to investigate its strain sensitivity and temperature compensation characteristics. The results show that the strain sensitivity of the sensor can be adjusted effectively by the correspondent L/LFBG parameter, with an acceptable discrepancy within ± 5% of the theoretical value. The linearity, repeatability, and hysteresis were analyzed, and the errors were 0.98%, 1.15%, and 0.09%, respectively, with excellent performance. When the temperature difference was 20°C, through temperature compensation calibration, the error between the monitored strain and the actual strain was within 5% after temperature compensation correction, showing that this new type of FBG strain sensor can meet the strain monitoring needs of various engineering structures and provide reliable data acquisition

Photonic sensors based on flexible materials with FBGs for use on biomedical applications

This chapter is intended for presenting biomedical applications of FBGs embedded into flexible carriers for enhancing the sensitivity and to provide interference-free instrumentation.This work was fully supported by the Algoritmi’s Strategic Project UI 319-2011-2012, under the Portuguese Foundation for Science and Technology grant Pest C/EEI/UI0319/2011

Optical fiber sensors for the non-destructive evaluation of materials

The operation of the modal domain vibration sensor was demonstrated in several simple vibrational systems. Two apparent advantages are the sensors bandwidth and sensitivity. An inherent drawback of standard vibration detection devices is their rapid cost increase with high frequency bandwidth. This sensor showed consistent response in the freqency range of 1.5 to 400 Hz. By imparting very small but measurable excitations in the structures, the sensors ability to respond to very low order vibration induced strain was established. Dynamic ranges on the order of 18 to 22 dB for the CF beam and string systems respectively were observed. The sensor itself represents a very simple system: a coherent source, a single fiber and a low bandwidth detector. The inherent advantages of ruggedness and immunity to external radiation can also be added. Finally, the sensor minimally impairs structural motion through loading, an advantage in monitoring small vibrations or lightweight structures. Some drawbacks of the sensor are also noted

Fiber Bragg Gratings as e-Health Enablers: An Overview for Gait Analysis Applications

Nowadays, the fast advances in sensing technologies and ubiquitous wireless networking are reflected in medical practice. It provides new healthcare advantages under the scope of e-Health applications, enhancing life quality of citizens. The increase of life expectancy of current population comes with its challenges and growing health risks, which include locomotive problems. Such impairments and its rehabilitation require a close monitoring and continuous evaluation, which add financial burdens on an already overloaded healthcare system. Analysis of body movements and gait pattern can help in the rehabilitation of such problems. These monitoring systems should be noninvasive and comfortable, in order to not jeopardize the mobility and the day-to-day activities of citizens. The use of fiber Bragg gratings (FBGs) as e-Health enablers has presented itself as a new topic to be investigated, exploiting the FBGs’ advantages over its electronic counterparts. Although gait analysis has been widely assessed, the use of FBGs in biomechanics and rehabilitation is recent, with a wide field of applications. This chapter provides a review of the application of FBGs for gait analysis monitoring, namely its use in topics such as the monitoring of plantar pressure, angle, and torsion and its integration in rehabilitation exoskeletons and for prosthetic control