SUMC fault tolerant computer system

The results of the trade studies are presented. These trades cover: establishing the basic configuration, establishing the CPU/memory configuration, establishing an approach to crosstrapping interfaces, defining the requirements of the redundancy management unit (RMU), establishing a spare plane switching strategy for the fault-tolerant memory (FTM), and identifying the most cost effective way of extending the memory addressing capability beyond the 64 K-bytes (K=1024) of SUMC-II B. The results of the design are compiled in Contract End Item (CEI) Specification for the NASA Standard Spacecraft Computer II (NSSC-II), IBM 7934507. The implementation of the FTM and memory address expansion

Redundancy management for efficient fault recovery in NASA's distributed computing system

The management of redundancy in computer systems was studied and guidelines were provided for the development of NASA's fault-tolerant distributed systems. Fault recovery and reconfiguration mechanisms were examined. A theoretical foundation was laid for redundancy management by efficient reconfiguration methods and algorithmic diversity. Algorithms were developed to optimize the resources for embedding of computational graphs of tasks in the system architecture and reconfiguration of these tasks after a failure has occurred. The computational structure represented by a path and the complete binary tree was considered and the mesh and hypercube architectures were targeted for their embeddings. The innovative concept of Hybrid Algorithm Technique was introduced. This new technique provides a mechanism for obtaining fault tolerance while exhibiting improved performance

Low-Complexity Codes for Random and Clustered High-Order Failures in Storage Arrays

RC (Random/Clustered) codes are a new efficient array-code family for recovering from 4-erasures. RC codes correct most 4-erasures, and essentially all 4-erasures that are clustered. Clustered erasures are introduced as a new erasure model for storage arrays. This model draws its motivation from correlated device failures, that are caused by physical proximity of devices, or by age proximity of endurance-limited solid-state drives. The reliability of storage arrays that employ RC codes is analyzed and compared to known codes. The new RC code is significantly more efficient, in all practical implementation factors, than the best known 4-erasure correcting MDS code. These factors include: small-write update-complexity, full-device update-complexity, decoding complexity and number of supported devices in the array

Conceptual design and feasibility evaluation model of a 10 to the 8th power bit oligatomic mass memory. Volume 1: Conceptual design

The oligatomic (mirror) thin film memory technology is a suitable candidate for general purpose spaceborne applications in the post-1975 time frame. Capacities of around 10 to the 8th power bits can be reliably implemented with systems designed around a 335 million bit module. The recommended mode was determined following an investigation of implementation sizes ranging from an 8,000,000 to 100,000,000 bits per module. Cost, power, weight, volume, reliability, maintainability and speed were investigated. The memory includes random access, NDRO, SEC-DED, nonvolatility, and dual interface characteristics. The applications most suitable for the technology are those involving a large capacity with high speed (no latency), nonvolatility, and random accessing

Advanced flight control system study

A fly by wire flight control system architecture designed for high reliability includes spare sensor and computer elements to permit safe dispatch with failed elements, thereby reducing unscheduled maintenance. A methodology capable of demonstrating that the architecture does achieve the predicted performance characteristics consists of a hierarchy of activities ranging from analytical calculations of system reliability and formal methods of software verification to iron bird testing followed by flight evaluation. Interfacing this architecture to the Lockheed S-3A aircraft for flight test is discussed. This testbed vehicle can be expanded to support flight experiments in advanced aerodynamics, electromechanical actuators, secondary power systems, flight management, new displays, and air traffic control concepts

Design of a fault tolerant airborne digital computer. Volume 1: Architecture

This volume is concerned with the architecture of a fault tolerant digital computer for an advanced commercial aircraft. All of the computations of the aircraft, including those presently carried out by analogue techniques, are to be carried out in this digital computer. Among the important qualities of the computer are the following: (1) The capacity is to be matched to the aircraft environment. (2) The reliability is to be selectively matched to the criticality and deadline requirements of each of the computations. (3) The system is to be readily expandable. contractible, and (4) The design is to appropriate to post 1975 technology. Three candidate architectures are discussed and assessed in terms of the above qualities. Of the three candidates, a newly conceived architecture, Software Implemented Fault Tolerance (SIFT), provides the best match to the above qualities. In addition SIFT is particularly simple and believable. The other candidates, Bus Checker System (BUCS), also newly conceived in this project, and the Hopkins multiprocessor are potentially more efficient than SIFT in the use of redundancy, but otherwise are not as attractive

A study of the selection of microcomputer architectures to automate planetary spacecraft power systems

Performance and reliability models of alternate microcomputer architectures as a methodology for optimizing system design were examined. A methodology for selecting an optimum microcomputer architecture for autonomous operation of planetary spacecraft power systems was developed. Various microcomputer system architectures are analyzed to determine their application to spacecraft power systems. It is suggested that no standardization formula or common set of guidelines exists which provides an optimum configuration for a given set of specifications

Novel fault tolerant Multi-Bit Upset (MBU) Error-Detection and Correction (EDAC) architecture

Desde el punto de vista de seguridad, la certificación aeronáutica de aplicaciones críticas de vuelo requiere diferentes técnicas que son usadas para prevenir fallos en los equipos electrónicos. Los fallos de tipo hardware debido a la radiación solar que existe a las alturas standard de vuelo, como SEU (Single Event Upset) y MCU (Multiple Bit Upset), provocan un cambio de estado de los bits que soportan la información almacenada en memoria. Estos fallos se producen, por ejemplo, en la memoria de configuración de una FPGA, que es donde se definen todas las funcionalidades. Las técnicas de protección requieren normalmente de redundancias que incrementan el coste, número de componentes, tamaño de la memoria y peso. En la fase de desarrollo de aplicaciones críticas de vuelo, generalmente se utilizan una serie de estándares o recomendaciones de diseño como ABD100, RTCA DO-160, IEC62395, etc, y diferentes técnicas de protección para evitar fallos del tipo SEU o MCU. Estas técnicas están basadas en procesos tecnológicos específicos como memorias robustas, codificaciones para detección y corrección de errores (EDAC), redundancias software, redundancia modular triple (TMR) o soluciones a nivel sistema. Esta tesis está enfocada a minimizar e incluso suprimir los efectos de los SEUs y MCUs que particularmente ocurren en la electrónica de avión como consecuencia de la exposición a radiación de partículas no cargadas (como son los neutrones) que se encuentra potenciada a las típicas alturas de vuelo. La criticidad en vuelo que tienen determinados sistemas obligan a que dichos sistemas sean tolerantes a fallos, es decir, que garanticen un correcto funcionamiento aún cuando se produzca un fallo en ellos. Es por ello que soluciones como las presentadas en esta tesis tienen interés en el sector industrial. La Tesis incluye una descripción inicial de la física de la radiación incidente sobre aeronaves, y el análisis de sus efectos en los componentes electrónicos aeronaúticos basados en semiconductor, que desembocan en la generación de SEUs y MCUs. Este análisis permite dimensionar adecuadamente y optimizar los procedimientos de corrección que se propongan posteriormente. La Tesis propone un sistema de corrección de fallos SEUs y MCUs que permita cumplir la condición de Sistema Tolerante a Fallos, a la vez que minimiza los niveles de redundancia y de complejidad de los códigos de corrección. El nivel de redundancia es minimizado con la introducción del concepto propuesto HSB (Hardwired Seed Bits), en la que se reduce la información esencial a unos pocos bits semilla, neutros frente a radiación. Los códigos de corrección requeridos se reducen a la corrección de un único error, gracias al uso del concepto de Distancia Virtual entre Bits, a partir del cual será posible corregir múltiples errores simultáneos (MCUs) a partir de códigos simples de corrección. Un ejemplo de aplicación de la Tesis es la implementación de una Protección Tolerante a Fallos sobre la memoria SRAM de una FPGA. Esto significa que queda protegida no sólo la información contenida en la memoria sino que también queda auto-protegida la función de protección misma almacenada en la propia SRAM. De esta forma, el sistema es capaz de auto-regenerarse ante un SEU o incluso un MCU, independientemente de la zona de la SRAM sobre la que impacte la radiación. Adicionalmente, esto se consigue con códigos simples tales como corrección por bit de paridad y Hamming, minimizando la dedicación de recursos de computación hacia tareas de supervisión del sistema.For airborne safety critical applications certification, different techniques are implemented to prevent failures in electronic equipments. The HW failures at flying heights of aircrafts related to solar radiation such as SEU (Single-Event-Upset) and MCU (Multiple Bit Upset), causes bits alterations that corrupt the information at memories. These HW failures cause errors, for example, in the Configuration-Code of an FPGA that defines the functionalities. The protection techniques require classically redundant functionalities that increases the cost, components, memory space and weight. During the development phase for airborne safety critical applications, different aerospace standards are generally recommended as ABD100, RTCA-DO160, IEC62395, etc, and different techniques are classically used to avoid failures such as SEU or MCU. These techniques are based on specific technology processes, Hardened memories, error detection and correction codes (EDAC), SW redundancy, Triple Modular Redundancy (TMR) or System level solutions. This Thesis is focussed to minimize, and even to remove, the effects of SEUs and MCUs, that particularly occurs in the airborne electronics as a consequence of its exposition to solar radiation of non-charged particles (for example the neutrons). These non-charged particles are even powered at flying altitudes due to aircraft volume. The safety categorization of different equipments/functionalities requires a design based on fault-tolerant approach that means, the system will continue its normal operation even if a failure occurs. The solution proposed in this Thesis is relevant for the industrial sector because of its Fault-tolerant capability. Thesis includes an initial description for the physics of the solar radiation that affects into aircrafts, and also the analyses of their effects into the airborne electronics based on semiconductor components that create the SEUs and MCUs. This detailed analysis allows the correct sizing and also the optimization of the procedures used to correct the errors. This Thesis proposes a system that corrects the SEUs and MCUs allowing the fulfilment of the Fault-Tolerant requirement, reducing the redundancy resources and also the complexity of the correction codes. The redundancy resources are minimized thanks to the introduction of the concept of HSB (Hardwired Seed Bits), in which the essential information is reduced to a few seed bits, neutral to radiation. The correction codes required are reduced to the correction of one error thanks to the use of the concept of interleaving distance between adjacent bits, this allows the simultaneous multiple error correction with simple single error correcting codes. An example of the application of this Thesis is the implementation of the Fault-tolerant architecture of an SRAM-based FPGA. That means that the information saved in the memory is protected but also the correction functionality is auto protected as well, also saved into SRAM memory. In this way, the system is able to self-regenerate the information lost in case of SEUs or MCUs. This is independent of the SRAM area affected by the radiation. Furthermore, this performance is achieved by means simple error correcting codes, as parity bits or Hamming, that minimize the use of computational resources to this supervision tasks for system.Programa Oficial de Doctorado en Ingeniería Eléctrica, Electrónica y AutomáticaPresidente: Luis Alfonso Entrena Arrontes.- Secretario: Pedro Reviriego Vasallo.- Vocal: Mª Luisa López Vallej

Airborne Advanced Reconfigurable Computer System (ARCS)

A digital computer subsystem fault-tolerant concept was defined, and the potential benefits and costs of such a subsystem were assessed when used as the central element of a new transport's flight control system. The derived advanced reconfigurable computer system (ARCS) is a triple-redundant computer subsystem that automatically reconfigures, under multiple fault conditions, from triplex to duplex to simplex operation, with redundancy recovery if the fault condition is transient. The study included criteria development covering factors at the aircraft's operation level that would influence the design of a fault-tolerant system for commercial airline use. A new reliability analysis tool was developed for evaluating redundant, fault-tolerant system availability and survivability; and a stringent digital system software design methodology was used to achieve design/implementation visibility

Fault tolerant programmable digital attitude control electronics study

The attitude control electronics mechanization study to develop a fault tolerant autonomous concept for a three axis system is reported. Programmable digital electronics are compared to general purpose digital computers. The requirements, constraints, and tradeoffs are discussed. It is concluded that: (1) general fault tolerance can be achieved relatively economically, (2) recovery times of less than one second can be obtained, (3) the number of faulty behavior patterns must be limited, and (4) adjoined processes are the best indicators of faulty operation