20,968 research outputs found
Separation Framework: An Enabler for Cooperative and D2D Communication for Future 5G Networks
Soaring capacity and coverage demands dictate that future cellular networks
need to soon migrate towards ultra-dense networks. However, network
densification comes with a host of challenges that include compromised energy
efficiency, complex interference management, cumbersome mobility management,
burdensome signaling overheads and higher backhaul costs. Interestingly, most
of the problems, that beleaguer network densification, stem from legacy
networks' one common feature i.e., tight coupling between the control and data
planes regardless of their degree of heterogeneity and cell density.
Consequently, in wake of 5G, control and data planes separation architecture
(SARC) has recently been conceived as a promising paradigm that has potential
to address most of aforementioned challenges. In this article, we review
various proposals that have been presented in literature so far to enable SARC.
More specifically, we analyze how and to what degree various SARC proposals
address the four main challenges in network densification namely: energy
efficiency, system level capacity maximization, interference management and
mobility management. We then focus on two salient features of future cellular
networks that have not yet been adapted in legacy networks at wide scale and
thus remain a hallmark of 5G, i.e., coordinated multipoint (CoMP), and
device-to-device (D2D) communications. After providing necessary background on
CoMP and D2D, we analyze how SARC can particularly act as a major enabler for
CoMP and D2D in context of 5G. This article thus serves as both a tutorial as
well as an up to date survey on SARC, CoMP and D2D. Most importantly, the
article provides an extensive outlook of challenges and opportunities that lie
at the crossroads of these three mutually entangled emerging technologies.Comment: 28 pages, 11 figures, IEEE Communications Surveys & Tutorials 201
Endpoint-transparent Multipath Transport with Software-defined Networks
Multipath forwarding consists of using multiple paths simultaneously to
transport data over the network. While most such techniques require endpoint
modifications, we investigate how multipath forwarding can be done inside the
network, transparently to endpoint hosts. With such a network-centric approach,
packet reordering becomes a critical issue as it may cause critical performance
degradation.
We present a Software Defined Network architecture which automatically sets
up multipath forwarding, including solutions for reordering and performance
improvement, both at the sending side through multipath scheduling algorithms,
and the receiver side, by resequencing out-of-order packets in a dedicated
in-network buffer.
We implemented a prototype with commonly available technology and evaluated
it in both emulated and real networks. Our results show consistent throughput
improvements, thanks to the use of aggregated path capacity. We give
comparisons to Multipath TCP, where we show our approach can achieve a similar
performance while offering the advantage of endpoint transparency
SecMon: End-to-End Quality and Security Monitoring System
The Voice over Internet Protocol (VoIP) is becoming a more available and
popular way of communicating for Internet users. This also applies to
Peer-to-Peer (P2P) systems and merging these two have already proven to be
successful (e.g. Skype). Even the existing standards of VoIP provide an
assurance of security and Quality of Service (QoS), however, these features are
usually optional and supported by limited number of implementations. As a
result, the lack of mandatory and widely applicable QoS and security guaranties
makes the contemporary VoIP systems vulnerable to attacks and network
disturbances. In this paper we are facing these issues and propose the SecMon
system, which simultaneously provides a lightweight security mechanism and
improves quality parameters of the call. SecMon is intended specially for VoIP
service over P2P networks and its main advantage is that it provides
authentication, data integrity services, adaptive QoS and (D)DoS attack
detection. Moreover, the SecMon approach represents a low-bandwidth consumption
solution that is transparent to the users and possesses a self-organizing
capability. The above-mentioned features are accomplished mainly by utilizing
two information hiding techniques: digital audio watermarking and network
steganography. These techniques are used to create covert channels that serve
as transport channels for lightweight QoS measurement's results. Furthermore,
these metrics are aggregated in a reputation system that enables best route
path selection in the P2P network. The reputation system helps also to mitigate
(D)DoS attacks, maximize performance and increase transmission efficiency in
the network.Comment: Paper was presented at 7th international conference IBIZA 2008: On
Computer Science - Research And Applications, Poland, Kazimierz Dolny
31.01-2.02 2008; 14 pages, 5 figure
Hybrid Satellite-Terrestrial Communication Networks for the Maritime Internet of Things: Key Technologies, Opportunities, and Challenges
With the rapid development of marine activities, there has been an increasing
number of maritime mobile terminals, as well as a growing demand for high-speed
and ultra-reliable maritime communications to keep them connected.
Traditionally, the maritime Internet of Things (IoT) is enabled by maritime
satellites. However, satellites are seriously restricted by their high latency
and relatively low data rate. As an alternative, shore & island-based base
stations (BSs) can be built to extend the coverage of terrestrial networks
using fourth-generation (4G), fifth-generation (5G), and beyond 5G services.
Unmanned aerial vehicles can also be exploited to serve as aerial maritime BSs.
Despite of all these approaches, there are still open issues for an efficient
maritime communication network (MCN). For example, due to the complicated
electromagnetic propagation environment, the limited geometrically available BS
sites, and rigorous service demands from mission-critical applications,
conventional communication and networking theories and methods should be
tailored for maritime scenarios. Towards this end, we provide a survey on the
demand for maritime communications, the state-of-the-art MCNs, and key
technologies for enhancing transmission efficiency, extending network coverage,
and provisioning maritime-specific services. Future challenges in developing an
environment-aware, service-driven, and integrated satellite-air-ground MCN to
be smart enough to utilize external auxiliary information, e.g., sea state and
atmosphere conditions, are also discussed
Analysis of interworking functions in heterogeneous networks
Future cellular radio networks will enable mobile terminals to communicate in environments populated by a multitude of devices, technologies and business actors using several radio interfaces. In this environment, one important task is to develop common control functions for elements in such networks. One of today's challenges is to provide service continuity in those highly heterogeneous networks. The service continuity can be measured in terms of a satisfied user criteria, which consists e.g. of the perceived end to end data packet delay, i.e. transport layer packet delay. The IEEE 802.21 standard focuses on the support of media independent handover for a broad range of technologies, but with strong emphasis on 802 technologies. The Framework Programme (FP)7 European Project OMEGA investigates the performance of home networks, which consist of technologies like Wireless Local Area Networks (WLAN), Hybrid Wireless Optics (HWO) or Power Line Communications (PLC). The aim of this work is to investigate in the context of the OMEGA project, which functions of the IEEE 802.21 standard are needed in order to co-operate in heterogeneous home networks. Subsequently, their performance in terms of QoS evaluation are developed. One of the most important functions is the path selection since it establishes the flow between source and destination and simultaneously, deals with the reservation of resources. In this work an approach for the identification and selection of possible paths using signal flow graphs analytically has been evaluated. The scheme is based on ad hoc networks and the proposed algorithm is Bandwidth Guaranteed Source Routing (BGSR). The analysis provides information about the required delay in the selection and helps to evaluate the influence of the route selection in the uninterrupted provision of service. Another concept to be considered is the path re-selection mechanism. A comparative analysis of centralized and decentralized solutions is developed using SFGs as well and basing the evaluation on the latency of both mechanisms
Cross-layer design of multi-hop wireless networks
MULTI -hop wireless networks are usually defined as a collection of nodes
equipped with radio transmitters, which not only have the capability to
communicate each other in a multi-hop fashion, but also to route each othersâ data
packets. The distributed nature of such networks makes them suitable for a variety of
applications where there are no assumed reliable central entities, or controllers, and
may significantly improve the scalability issues of conventional single-hop wireless
networks.
This Ph.D. dissertation mainly investigates two aspects of the research issues
related to the efficient multi-hop wireless networks design, namely: (a) network
protocols and (b) network management, both in cross-layer design paradigms to
ensure the notion of service quality, such as quality of service (QoS) in wireless mesh
networks (WMNs) for backhaul applications and quality of information (QoI) in
wireless sensor networks (WSNs) for sensing tasks. Throughout the presentation of
this Ph.D. dissertation, different network settings are used as illustrative examples,
however the proposed algorithms, methodologies, protocols, and models are not
restricted in the considered networks, but rather have wide applicability.
First, this dissertation proposes a cross-layer design framework integrating
a distributed proportional-fair scheduler and a QoS routing algorithm, while using
WMNs as an illustrative example. The proposed approach has significant performance
gain compared with other network protocols. Second, this dissertation proposes
a generic admission control methodology for any packet network, wired and
wireless, by modeling the network as a black box, and using a generic mathematical
0. Abstract 3
function and Taylor expansion to capture the admission impact. Third, this dissertation
further enhances the previous designs by proposing a negotiation process,
to bridge the applicationsâ service quality demands and the resource management,
while using WSNs as an illustrative example. This approach allows the negotiation
among different service classes and WSN resource allocations to reach the optimal
operational status. Finally, the guarantees of the service quality are extended to
the environment of multiple, disconnected, mobile subnetworks, where the question
of how to maintain communications using dynamically controlled, unmanned data
ferries is investigated
Transparency in Complex Computational Systems
Scientists depend on complex computational systems that are often ineliminably opaque, to the detriment of our ability to give scientific explanations and detect artifacts. Some philosophers have s..
Towards video streaming in IoT environments: vehicular communication perspective
Multimedia oriented Internet of Things (IoT) enables pervasive and real-time communication of video, audio and image data among devices in an immediate surroundings. Today's vehicles have the capability of supporting real time multimedia acquisition. Vehicles with high illuminating infrared cameras and customized sensors can communicate with other on-road devices using dedicated short-range communication (DSRC) and 5G enabled communication technologies. Real time incidence of both urban and highway vehicular traffic environment can be captured and transmitted using vehicle-to-vehicle and vehicle-to-infrastructure communication modes. Video streaming in vehicular IoT (VSV-IoT) environments is in growing stage with several challenges that need to be addressed ranging from limited resources in IoT devices, intermittent connection in vehicular networks, heterogeneous devices, dynamism and scalability in video encoding, bandwidth underutilization in video delivery, and attaining application-precise quality of service in video streaming. In this context, this paper presents a comprehensive review on video streaming in IoT environments focusing on vehicular communication perspective. Specifically, significance of video streaming in vehicular IoT environments is highlighted focusing on integration of vehicular communication with 5G enabled IoT technologies, and smart city oriented application areas for VSV-IoT. A taxonomy is presented for the classification of related literature on video streaming in vehicular network environments. Following the taxonomy, critical review of literature is performed focusing on major functional model, strengths and weaknesses. Metrics for video streaming in vehicular IoT environments are derived and comparatively analyzed in terms of their usage and evaluation capabilities. Open research challenges in VSV-IoT are identified as future directions of research in the area. The survey would benefit both IoT and vehicle industry practitioners and researchers, in terms of augmenting understanding of vehicular video streaming and its IoT related trends and issues
Improving relay based cellular networks performance in highly user congested and emergency situations
PhDRelay based cellular networks (RBCNs) are the technologies that incorporate multi-hop communication into traditional cellular networks. A RBCN can potentially support higher data rates, more stable radio coverage and more dynamic services. In reality, RBCNs still suffer from performance degradation in terms of high user congestion, base station failure and overloading in emergency situations. The focus of this thesis is to explore the potential to improve IEEE802.16j supported RBCN performance in user congestion and emergency situations using adjustments to the RF layer (by antenna adjustments or extensions using multi-hop) and cooperative adjustment algorithms, e.g. based on controlling frequency allocation centrally and using distributed approaches. The first part of this thesis designs and validates network reconfiguration algorithms for RBCN, including a cooperative antenna power control algorithm and a heuristic antenna tilting algorithm. The second part of this thesis investigates centralized and distributed dynamic frequency allocation for higher RBCN frequency efficiency, network resilience, and computation simplicity. It is demonstrated that these benefits mitigate user congestion and base station failure problems significantly. Additionally, interweaving coordinated dynamic frequency allocation and antenna tilting is investigated in order to obtain the benefits of both actions. The third part of this thesis incorporates Delay Tolerate Networking (DTN) technology into RBCN to let users self-organize to connect to functional base station through multi-hops supported by other users. Through the use of DTN, RBCN coverage and performance are improved. This thesis explores the augmentation of DTN routing protocols to let more un-covered users connect to base stations and improve network load balancin
- âŠ