MOCAST 2021

The 10th International Conference on Modern Circuit and System Technologies on Electronics and Communications (MOCAST 2021) will take place in Thessaloniki, Greece, from July 5th to July 7th, 2021. The MOCAST technical program includes all aspects of circuit and system technologies, from modeling to design, verification, implementation, and application. This Special Issue presents extended versions of top-ranking papers in the conference. The topics of MOCAST include:Analog/RF and mixed signal circuits;Digital circuits and systems design;Nonlinear circuits and systems;Device and circuit modeling;High-performance embedded systems;Systems and applications;Sensors and systems;Machine learning and AI applications;Communication; Network systems;Power management;Imagers, MEMS, medical, and displays;Radiation front ends (nuclear and space application);Education in circuits, systems, and communications

Modelling, Dimensioning and Optimization of 5G Communication Networks, Resources and Services

This reprint aims to collect state-of-the-art research contributions that address challenges in the emerging 5G networks design, dimensioning and optimization. Designing, dimensioning and optimization of communication networks resources and services have been an inseparable part of telecom network development. The latter must convey a large volume of traffic, providing service to traffic streams with highly differentiated requirements in terms of bit-rate and service time, required quality of service and quality of experience parameters. Such a communication infrastructure presents many important challenges, such as the study of necessary multi-layer cooperation, new protocols, performance evaluation of different network parts, low layer network design, network management and security issues, and new technologies in general, which will be discussed in this book

City-Friendly Smart Network Technologies and Infrastructures: The Spanish Experience

Efficient, resilient, and sustainable electricity delivery is a key cornerstone in increasingly large and complex urban environments, where citizens expect to keep or rise their living standards. In this context, cost-effective and ubiquitous digital technologies are driving the transformation of existing electrical infrastructures into truly smart systems capable of better providing the services a low-carbon society is demanding. The goal of this paper is twofold: 1) to review the dramatically evolving landscape of power systems, from the old framework based on centralized generation and control, aimed at serving inelastic customers through alternating current (ac) transmission networks and one-way distribution feeders, to a new paradigm centered mainly around two main axes: renewable generation, both centralized and distributed, and active customers (prosumers), interacting with each other through hybrid ac/dc smart grids; 2) to illustrate, through featured success stories, how several smart grid concepts and technologies have been put into practice in Spain over the last few years to optimize the performance of urban electrical assets

Space-time-frequency methods for interference-limited communication systems

textTraditionally, noise in communication systems has been modeled as an additive, white Gaussian noise process with independent, identically distributed samples. Although this model accurately reflects thermal noise present in communication system electronics, it fails to capture the statistics of interference and other sources of noise, e.g. in unlicensed communication bands. Modern communication system designers must take into account interference and non-Gaussian noise to maximize efficiencies and capacities of current and future communication networks. In this work, I develop new multi-dimensional signal processing methods to improve performance of communication systems in three applications areas: (i) underwater acoustic, (ii) powerline, and (iii) multi-antenna cellular. In underwater acoustic communications, I address impairments caused by strong, time-varying and Doppler-spread reverberations (self-interference) using adaptive space-time signal processing methods. I apply these methods to array receivers with a large number of elements. In powerline communications, I address impairments caused by non-Gaussian noise arising from devices sharing the powerline. I develop and apply a cyclic adaptive modulation and coding scheme and a factor-graph-based impulsive noise mitigation method to improve signal quality and boost link throughput and robustness. In cellular communications, I develop a low-latency, high-throughput space-time-frequency processing framework used for large scale (up to 128 antenna) MIMO. This framework is used in the world's first 100-antenna MIMO system and processes up to 492 Gbps raw baseband samples in the uplink and downlink directions. My methods prove that multi-dimensional processing methods can be applied to increase communication system performance without sacrificing real-time requirements.Electrical and Computer Engineerin

OPTIMIZATION OF TIME-RESPONSE AND AMPLIFICATION FEATURES OF EGOTs FOR NEUROPHYSIOLOGICAL APPLICATIONS

In device engineering, basic neuron-to-neuron communication has recently inspired the development of increasingly structured and efficient brain-mimicking setups in which the information flow can be processed with strategies resembling physiological ones. This is possible thanks to the use of organic neuromorphic devices, which can share the same electrolytic medium and adjust reciprocal connection weights according to temporal features of the input signals. In a parallel - although conceptually deeply interconnected - fashion, device engineers are directing their efforts towards novel tools to interface the brain and to decipher its signalling strategies. This led to several technological advances which allow scientists to transduce brain activity and, piece by piece, to create a detailed map of its functions. This effort extends over a wide spectrum of length-scales, zooming out from neuron-to-neuron communication up to global activity of neural populations. Both these scientific endeavours, namely mimicking neural communication and transducing brain activity, can benefit from the technology of Electrolyte-Gated Organic Transistors (EGOTs). Electrolyte-Gated Organic Transistors (EGOTs) are low-power electronic devices that functionally integrate the electrolytic environment through the exploitation of organic mixed ionic-electronic conductors. This enables the conversion of ionic signals into electronic ones, making such architectures ideal building blocks for neuroelectronics. This has driven extensive scientific and technological investigation on EGOTs. Such devices have been successfully demonstrated both as transducers and amplifiers of electrophysiological activity and as neuromorphic units. These promising results arise from the fact that EGOTs are active devices, which widely extend their applicability window over the capabilities of passive electronics (i.e. electrodes) but pose major integration hurdles. Being transistors, EGOTs need two driving voltages to be operated. If, on the one hand, the presence of two voltages becomes an advantage for the modulation of the device response (e.g. for devising EGOT-based neuromorphic circuitry), on the other hand it can become detrimental in brain interfaces, since it may result in a non-null bias directly applied on the brain. If such voltage exceeds the electrochemical stability window of water, undesired faradic reactions may lead to critical tissue and/or device damage. This work addresses EGOTs applications in neuroelectronics from the above-described dual perspective, spanning from neuromorphic device engineering to in vivo brain-device interfaces implementation. The advantages of using three-terminal architectures for neuromorphic devices, achieving reversible fine-tuning of their response plasticity, are highlighted. Jointly, the possibility of obtaining a multilevel memory unit by acting on the gate potential is discussed. Additionally, a novel mode of operation for EGOTs is introduced, enabling full retention of amplification capability while, at the same time, avoiding the application of a bias in the brain. Starting on these premises, a novel set of ultra-conformable active micro-epicortical arrays is presented, which fully integrate in situ fabricated EGOT recording sites onto medical-grade polyimide substrates. Finally, a whole organic circuitry for signal processing is presented, exploiting ad-hoc designed organic passive components coupled with EGOT devices. This unprecedented approach provides the possibility to sort complex signals into their constitutive frequency components in real time, thereby delineating innovative strategies to devise organic-based functional building-blocks for brain-machine interfaces.Nell’ingegneria elettronica, la comunicazione di base tra neuroni ha recentemente ispirato lo sviluppo di configurazioni sempre più articolate ed efficienti che imitano il cervello, in cui il flusso di informazioni può essere elaborato con strategie simili a quelle fisiologiche. Ciò è reso possibile grazie all'uso di dispositivi neuromorfici organici, che possono condividere lo stesso mezzo elettrolitico e regolare i pesi delle connessioni reciproche in base alle caratteristiche temporali dei segnali in ingresso. In modo parallelo, gli ingegneri elettronici stanno dirigendo i loro sforzi verso nuovi strumenti per interfacciare il cervello e decifrare le sue strategie di comunicazione. Si è giunti così a diversi progressi tecnologici che consentono agli scienziati di trasdurre l'attività cerebrale e, pezzo per pezzo, di creare una mappa dettagliata delle sue funzioni. Entrambi questi ambiti scientifici, ovvero imitare la comunicazione neurale e trasdurre l'attività cerebrale, possono trarre vantaggio dalla tecnologia dei transistor organici a base elettrolitica (EGOT). I transistor organici a base elettrolitica (EGOT) sono dispositivi elettronici a bassa potenza che integrano funzionalmente l'ambiente elettrolitico attraverso lo sfruttamento di conduttori organici misti ionici-elettronici, i quali consentono di convertire i segnali ionici in segnali elettronici, rendendo tali dispositivi ideali per la neuroelettronica. Gli EGOT sono stati dimostrati con successo sia come trasduttori e amplificatori dell'attività elettrofisiologica e sia come unità neuromorfiche. Tali risultati derivano dal fatto che gli EGOT sono dispositivi attivi, al contrario dell'elettronica passiva (ad esempio gli elettrodi), ma pongono comunque qualche ostacolo alla loro integrazione in ambiente biologico. In quanto transistor, gli EGOT necessitano l'applicazione di due tensioni tra i suoi terminali. Se, da un lato, la presenza di due tensioni diventa un vantaggio per la modulazione della risposta del dispositivo (ad esempio, per l'ideazione di circuiti neuromorfici basati su EGOT), dall'altro può diventare dannosa quando gli EGOT vengono adoperati come sito di registrazione nelle interfacce cerebrali, poiché una tensione non nulla può essere applicata direttamente al cervello. Se tale tensione supera la finestra di stabilità elettrochimica dell'acqua, reazioni faradiche indesiderate possono manifestarsi, le quali potrebbero danneggiare i tessuti e/o il dispositivo. Questo lavoro affronta le applicazioni degli EGOT nella neuroelettronica dalla duplice prospettiva sopra descritta: ingegnerizzazione neuromorfica ed implementazione come interfacce neurali in applicazioni in vivo. Vengono evidenziati i vantaggi dell'utilizzo di architetture a tre terminali per i dispositivi neuromorfici, ottenendo una regolazione reversibile della loro plasticità di risposta. Si discute inoltre la possibilità di ottenere un'unità di memoria multilivello agendo sul potenziale di gate. Viene introdotta una nuova modalità di funzionamento per gli EGOT, che consente di mantenere la capacità di amplificazione e, allo stesso tempo, di evitare l'applicazione di una tensione all’interfaccia cervello-dispositivo. Partendo da queste premesse, viene presentata una nuova serie di array micro-epicorticali ultra-conformabili, che integrano completamente i siti di registrazione EGOT fabbricati in situ su substrati di poliimmide. Infine, viene proposto un circuito organico per l'elaborazione del segnale, sfruttando componenti passivi organici progettati ad hoc e accoppiati a dispositivi EGOT. Questo approccio senza precedenti offre la possibilità di filtrare e scomporre segnali complessi nelle loro componenti di frequenza costitutive in tempo reale, delineando così strategie innovative per concepire blocchi funzionali a base organica per le interfacce cervello-macchina

Proceedings of the Third International Mobile Satellite Conference (IMSC 1993)

Satellite-based mobile communications systems provide voice and data communications to users over a vast geographic area. The users may communicate via mobile or hand-held terminals, which may also provide access to terrestrial cellular communications services. While the first and second International Mobile Satellite Conferences (IMSC) mostly concentrated on technical advances, this Third IMSC also focuses on the increasing worldwide commercial activities in Mobile Satellite Services. Because of the large service areas provided by such systems, it is important to consider political and regulatory issues in addition to technical and user requirements issues. Topics covered include: the direct broadcast of audio programming from satellites; spacecraft technology; regulatory and policy considerations; advanced system concepts and analysis; propagation; and user requirements and applications