Traffic Control in Packet Switched Networks

This thesis examines traffic control options available in two existing routing solutions in packet-switched networks. The first solution is the shortest path hop-by-hop routing deployed with the OSPF or IS-IS routing protocol and the IP forwarding protocol. This is the initially deployed and still the most popular routing solution in the Internet. The second solution is explicit routing implemented with the RSVP-TE or CR-LDP signalling protocol and the MPLS forwarding protocol. This is the latest solution to have become widely deployed in the Internet. The thesis analyses the limitations of the two routing solutions as tools for traffic control and yields new insights that can guide the analysis and design of protocols involved in the process. A set of recommendations for modifications of the existing protocols is provided which would allow for a range of new traffic control approaches to be deployed in packet-switched networks. For future routing solutions which comply with the proposed recommendations two new algorithms are presented in the thesis. They are called the Link Mask Topology (LMT) algorithm, and the Link Cost Topology (LCT) algorithm. The two algorithms define a set of routing topologies and assign network traffic to routes available in these topologies aiming to simultaneously achieve high network throughput and fair resource allocation. While there are similarities in the operation of the two algorithms, their applicability is different as they allocate resources to multiple paths between two network nodes which are available in the defined routing topologies according to a different rule set. The LMT algorithm directs traffic sent between any pair of network nodes to a single route. The LCT algorithm directs traffic sent between a pair of network nodes to a number of routes. The performance of the two proposed algorithms is evaluated in the thesis with calculations comparing them to the shortest path routing algorithm in a number of test cases. The test results demonstrate the potentials of the two proposed algorithms in improving the performance of networks which employ shortest path routing

Spare capacity modelling and its applications in survivable iP-over-optical networks

As the interest in IP-over-optical networks are becoming the preferred core network architecture, survivability has emerged as a major concern for network service providers; a result of the potentially huge traffic volumes that will be supported by optical infrastructure. Therefore, implementing recovery strategies is critical. In addition to the traditional recovery schemes based around protection and restoration mechanisms, pre-allocated restoration represents a potential candidate to effect and maintain network resilience under failure conditions. Preallocated restoration technique is particularly interesting because it provides a trade-off in terms of recovery performance and resources between protection and restoration schemes. In this paper, the pre-allocated restoration performance is investigated under single and dual-link failures considering a distributed GMPLSbased IP/WDM mesh network. Two load-based spare capacity optimisation methods are proposed in this paper; Local Spare Capacity Optimisation (LSCO) and Global Spare Capacity Optimisation (GSCO)

Logical topology design for IP rerouting: ASONs versus static OTNs

IP-based backbone networks are gradually moving to a network model consisting of high-speed routers that are flexibly interconnected by a mesh of light paths set up by an optical transport network that consists of wavelength division multiplexing (WDM) links and optical cross-connects. In such a model, the generalized MPLS protocol suite could provide the IP centric control plane component that will be used to deliver rapid and dynamic circuit provisioning of end-to-end optical light paths between the routers. This is called an automatic switched optical (transport) network (ASON). An ASON enables reconfiguration of the logical IP topology by setting up and tearing down light paths. This allows to up- or downgrade link capacities during a router failure to the capacities needed by the new routing of the affected traffic. Such survivability against (single) IP router failures is cost-effective, as capacity to the IP layer can be provided flexibly when necessary. We present and investigate a logical topology optimization problem that minimizes the total amount or cost of the needed resources (interfaces, wavelengths, WDM line-systems, amplifiers, etc.) in both the IP and the optical layer. A novel optimization aspect in this problem is the possibility, as a result of the ASON, to reuse the physical resources (like interface cards and WDM line-systems) over the different network states (the failure-free and all the router failure scenarios). We devised a simple optimization strategy to investigate the cost of the ASON approach and compare it with other schemes that survive single router failures

Traffic Engineering with Segment Routing: SDN-based Architectural Design and Open Source Implementation

Traffic Engineering (TE) in IP carrier networks is one of the functions that can benefit from the Software Defined Networking paradigm. By logically centralizing the control of the network, it is possible to "program" per-flow routing based on TE goals. Traditional per-flow routing requires a direct interaction between the SDN controller and each node that is involved in the traffic paths. Depending on the granularity and on the temporal properties of the flows, this can lead to scalability issues for the amount of routing state that needs to be maintained in core network nodes and for the required configuration traffic. On the other hand, Segment Routing (SR) is an emerging approach to routing that may simplify the route enforcement delegating all the configuration and per-flow state at the border of the network. In this work we propose an architecture that integrates the SDN paradigm with SR-based TE, for which we have provided an open source reference implementation. We have designed and implemented a simple TE/SR heuristic for flow allocation and we show and discuss experimental results.Comment: Extended version of poster paper accepted for EWSDN 2015 (version v4 - December 2015

Optimized Design of Survivable MPLS over Optical Transport Networks. Optical Switching and Networking

In this paper we study different options for the survivability implementation in MPLS over Optical Transport Networks in terms of network resource usage and configuration cost. We investigate two approaches to the survivability deployment: single layer and multilayer survivability and present various methods for spare capacity allocation (SCA) to reroute disrupted traffic. The comparative analysis shows the influence of the traffic granularity on the survivability cost: for high bandwidth LSPs, close to the optical channel capacity, the multilayer survivability outperforms the single layer one, whereas for low bandwidth LSPs the single layer survivability is more cost-efficient. For the multilayer survivability we demonstrate that by mapping efficiently the spare capacity of the MPLS layer onto the resources of the optical layer one can achieve up to 22% savings in the total configuration cost and up to 37% in the optical layer cost. Further savings (up to 9 %) in the wavelength use can be obtained with the integrated approach to network configuration over the sequential one, however, at the increase in the optimization problem complexity. These results are based on a cost model with actual technology pricing and were obtained for networks targeted to a nationwide coverage