Architectures and Key Technical Challenges for 5G Systems Incorporating Satellites

Satellite Communication systems are a promising solution to extend and complement terrestrial networks in unserved or under-served areas. This aspect is reflected by recent commercial and standardisation endeavours. In particular, 3GPP recently initiated a Study Item for New Radio-based, i.e., 5G, Non-Terrestrial Networks aimed at deploying satellite systems either as a stand-alone solution or as an integration to terrestrial networks in mobile broadband and machine-type communication scenarios. However, typical satellite channel impairments, as large path losses, delays, and Doppler shifts, pose severe challenges to the realisation of a satellite-based NR network. In this paper, based on the architecture options currently being discussed in the standardisation fora, we discuss and assess the impact of the satellite channel characteristics on the physical and Medium Access Control layers, both in terms of transmitted waveforms and procedures for enhanced Mobile BroadBand (eMBB) and NarrowBand-Internet of Things (NB-IoT) applications. The proposed analysis shows that the main technical challenges are related to the PHY/MAC procedures, in particular Random Access (RA), Timing Advance (TA), and Hybrid Automatic Repeat reQuest (HARQ) and, depending on the considered service and architecture, different solutions are proposed.Comment: Submitted to Transactions on Vehicular Technologies, April 201

Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years

Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions

Kapeankaistan LTE koneiden välisessä satelliittitietoliikenteessä

Recent trends to wireless Machine-to-Machine (M2M) communication and Internet of Things (IoT) has created a new demand for more efficient low-throughput wireless data connections. Beside the traditional wireless standards, focused on high bandwidth data transfer, has emerged a new generation of Low Power Wide Area Networks (LPWAN) which targets for less power demanding low-throughput devices requiring inexpensive data connections. Recently released NB-IoT (Narrowband IoT) specification extends the existing 4G/LTE standard allowing more easily accessible LPWAN cellular connectivity for IoT devices. Narrower bandwidth and lower data rates combined to a simplified air interface make it less resource demanding still benefiting from the widely spread LTE technologies and infrastructure. %% Applications & Why space Applications, such as wide scale sensor or asset tracking networks, can benefit from a global scale network coverage and easily available low-cost user equipment which could be made possible by new narrowband IoT satellite networks. In this thesis, the NB-IoT specification and its applicability for satellite communication is discussed. Primarily, LTE and NB-IoT standards are designed only for terrestrial and their utilization in Earth-to-space communication raises new challenges, such as timing and frequency synchronization requirements when utilizing Orthogonal Frequency Signal Multiplexing (OFDM) techniques. Many of these challenges can be overcome by specification adaptations and other existing techniques making minimal changes to the standard and allowing extension of the terrestrial cellular networks to global satellite access.Viimeaikaiset kehitystrendit koneiden välisessä kommunikaatiossa (Machine to Machine Communication, M2M) ja esineiden Internet (Internet of Things, IoT) -sovelluksissa ovat luoneet perinteisteisten nopean tiedonsiirron langattomien standardien ohelle uuden sukupolven LPWAN (Low Power Wide Area Networks) -tekniikoita, jotka ovat tarkoitettu pienitehoisille tiedonsiirtoa tarvitseville sovelluksille. Viimeaikoina yleistynyt NB-IoT standardi laajentaa 4G/LTE standardia mahdollistaen entistä matalamman virrankulutuksen matkapuhelinyhteydet IoT laitteissa. Kapeampi lähetyskaista ja hitaampi tiedonsiirtonopeus yhdistettynä yksinkertaisempaan ilmarajapintaan mahdollistaa pienemmän resurssivaatimukset saman aikaan hyötyen laajalti levinneistä LTE teknologioista ja olemassa olevasta infrastruktuurista. Useissa sovelluskohteissa, kuten suurissa sensoriverkoissa, voitaisiin hyötyä merkittävästi globaalista kattavuudesta yhdistettynä edullisiin helposti saataviin päätelaitteisiin. Tässä työssä käsitellään NB-IoT standardia ja sen soveltuvuutta satellittitietoliikenteeseen. LTE ja NB-IoT ovat kehitty maanpääliseen tietoliikenteeseen ja niiden hyödyntäminen avaruuden ja maan välisessä kommunikaatiossa aiheuttaa uusia haasteita esimerkiksi aika- ja taajuussynkronisaatiossa ja OFDM (Orthogonal Frequency Signal Multiplexing) -tekniikan hyödyntämisessä. Nämä haasteet voidaan ratkaista soveltamalla spesifikaatiota sekä muilla jo olemassa olevilla tekniikoilla tehden mahdollisimman vähän muutoksia alkuperäiseen standardiin, ja täten sallien maanpäälisten IoT verkkojen laajenemisen avaruuteen

Performance Analysis of Asynchronous NB-IoT Up-link Systems

The Third Generation Partnership Project (3GPP) published LTE release 13, which standardized a new radio access network (RAN) called Narrowband Internet of Things (NB-IoT). Such networks, particularly designed for massive machine-type communications (mMTC), inherit theIR functionalities from the existing LTE systems with slight differences and operate in a narrow frequency band of 180 kHz, consisting of one resource block (RB) of 12 LTE subcarriers. This thesis is mainly focused on single-tone in-band transmission with one 15 kHz subcarrier of the NB-IoT RB in the middle of the LTE RBs. The aim of this thesis is to examine the performance of both NB-IoT transmission and LTE transmission after certain enhancements of the NB-IoT transmitter. These additional approaches including time-domain windowing and filtering. Also a nonlinear power amplifier model for the NB-IoT transmitter is included in the study. It is worth to mention that NB-IoT and LTE signals are transmitted together through asynchronous channels to evaluate the effect of noise and Inter-Carrier Interference (ICI). In order to compare the effects of different modulation schemes, 4-QAM and 64-QAM are both considered for LTE transmission. Filters are designed to suppress the spectral sidelobes of transmitted signals to reduce the interferences due to asynchronous operation. What’s more, transmissions with one-subcarrier-wide guard band between the active NB-IoT and LTE subcarriers or without guard band are both examined from bit error-rate (BER) perspective

Performance Analysis of Asynchronous NB-IoT Up-link Systems

The Third Generation Partnership Project (3GPP) published LTE release 13, which standardized a new radio access network (RAN) called Narrowband Internet of Things (NB-IoT). Such networks, particularly designed for massive machine-type communications (mMTC), inherit theIR functionalities from the existing LTE systems with slight differences and operate in a narrow frequency band of 180 kHz, consisting of one resource block (RB) of 12 LTE subcarriers. This thesis is mainly focused on single-tone in-band transmission with one 15 kHz subcarrier of the NB-IoT RB in the middle of the LTE RBs. The aim of this thesis is to examine the performance of both NB-IoT transmission and LTE transmission after certain enhancements of the NB-IoT transmitter. These additional approaches including time-domain windowing and filtering. Also a nonlinear power amplifier model for the NB-IoT transmitter is included in the study. It is worth to mention that NB-IoT and LTE signals are transmitted together through asynchronous channels to evaluate the effect of noise and Inter-Carrier Interference (ICI). In order to compare the effects of different modulation schemes, 4-QAM and 64-QAM are both considered for LTE transmission. Filters are designed to suppress the spectral sidelobes of transmitted signals to reduce the interferences due to asynchronous operation. What’s more, transmissions with one-subcarrier-wide guard band between the active NB-IoT and LTE subcarriers or without guard band are both examined from bit error-rate (BER) perspective

Energy Efficiency in Communications and Networks

The topic of "Energy Efficiency in Communications and Networks" attracts growing attention due to economical and environmental reasons. The amount of power consumed by information and communication technologies (ICT) is rapidly increasing, as well as the energy bill of service providers. According to a number of studies, ICT alone is responsible for a percentage which varies from 2% to 10% of the world power consumption. Thus, driving rising cost and sustainability concerns about the energy footprint of the IT infrastructure. Energy-efficiency is an aspect that until recently was only considered for battery driven devices. Today we see energy-efficiency becoming a pervasive issue that will need to be considered in all technology areas from device technology to systems management. This book is seeking to provide a compilation of novel research contributions on hardware design, architectures, protocols and algorithms that will improve the energy efficiency of communication devices and networks and lead to a more energy proportional technology infrastructure

FBMC-based random access signal design and detection for LEO base stations

The integration of non-terrestrial networks into the 5G ecosystem is mainly driven by the possibility of provisioning service in remote areas. In this context, the advent of flying base stations at the low Earth orbit (LEO) will enable anywhere and anytime connectivity. To materialize this vision, it is of utmost importance to improve radio protocols with the aim of allowing direct satellite access. Bearing this aspect in mind, we present a new random access signal, which is based on the filter bank multicarrier (FBMC) waveform, and a computationally efficient detection scheme. The proposed solution outperforms the standardized access scheme based on single-carrier frequency division multiplexing (SC-FDM), by reducing out-of-band (OOB) emissions and reducing the missed detection probability in presence of very high carrier frequency offset (CFO), which is inherent to LEO satellite systems. The improvement is related to the fine frequency resolution of the detector and the use of pulse shaping techniques. Interestingly, the FBMC-based random access signal achieves a high level of commonality with 5G new radio, as the preamble generation method and the time-frequency allocation pattern can be kept unchanged. Concerning the practical implementation aspects, the complexity of the detector is similar in both SC-FDM and FBMC.This paper is part of the R+D+i project (PID2020-115323RB-C31) funded by MCIN/AEI/ 10.13039/501100011033. This work is supported by the grant from Spanish Ministry of Economic Affairs and Digital Transformation and the European union - NextGenerationEU (UNICO-5G I+D/AROMA3D-Space (TSI-063000-2021-70))Peer ReviewedPostprint (author's final draft

Analysis and Mitigation of Asynchronous Interference in Coordinated Multipoint Systems

Next generation cellular wireless networks need to achieve both high peak and average data rates. Also, they need to improve the fairness by providing more homogenous quality of service distribution over the entire cell area. Base station (BS) cooperation is one of the techniques which is used to achieve these requirements, especially the fairness requirement. It is able not only to mitigate inter-cell interference, but also to exploit this interference and to use it as a useful signal. Although BS cooperation or what is called coordinated multipoint (CoMP) communications proves that it can achieve high gains in theory, there are some challenges that need to be solved in order for it to be widely deployed. One of the major challenges which prevents the CoMP concept from being widely deployed in new cellular systems is timing synchronization. This problem is particularly challenging when OFDM is employed which is the case in the uplink (UL) and downlink (DL) of WiMAX systems and in the DL of LTE systems. The problem is inherited from the limitations caused by integer time offsets in OFDM systems. In order to achieve the gains promised by CoMP systems, the user equipments' (UEs) signals in UL or the BSs signals in DL should be synchronized such that the time difference of arrivals do not exceed the cyclic prefix length of the transmitted signals. In this thesis, we first provide a detailed mathematical analysis of the impact of integer time offsets on the performance of single-input-single-output (SISO) OFDM systems. In particular, closed-form expressions for the different types of interference caused by the integer time offset are derived. Furthermore, we derive exact closed-form expressions for the bit error rate (BER) and the symbol error rate (SER) of BPSK, QPSK and 16-QAM modulation for transmission over both AWGN and Rayleigh fading channels. The effect of the fractional carrier frequency offset (CFO) is taken into consideration in the derivations. For OFDM systems with a large number of subcarriers, an approximate method for evaluating the BER/SER is given. Next, we generalized our expressions to be suitable for the single-input-multiple-output (SIMO) OFDM systems. The derived closed-form expressions for the interference and probability of error enabled us to investigate the timing synchronization problem of UL CoMP systems, where it is not possible for a UE to be synchronized to more than one BS at the same time. This synchronization problem imposes an upper limit on the percentage of cooperation which could occur in an UL CoMP system. By using geometrical and analytical approaches, we define this upper bound. Moreover, an MMSE-based receiver that mitigates the unavoidable asynchronous interference is proposed. Furthermore, a simple joint channel and delay estimation block is incorporated into the receiver to examine its performance with estimation errors. Finally, an iterative procedure is suggested to reduce the complexity of the proposed mitigation method. Numerical results are provided to show the accuracy of the derived expressions and the robustness of the proposed mitigation method

System capacity enhancement for 5G network and beyond

A thesis submitted to the University of Bedfordshire, in fulfilment of the requirements for the degree of Doctor of PhilosophyThe demand for wireless digital data is dramatically increasing year over year. Wireless communication systems like Laptops, Smart phones, Tablets, Smart watch, Virtual Reality devices and so on are becoming an important part of people’s daily life. The number of mobile devices is increasing at a very fast speed as well as the requirements for mobile devices such as super high-resolution image/video, fast download speed, very short latency and high reliability, which raise challenges to the existing wireless communication networks. Unlike the previous four generation communication networks, the fifth-generation (5G) wireless communication network includes many technologies such as millimetre-wave communication, massive multiple-input multiple-output (MIMO), visual light communication (VLC), heterogeneous network (HetNet) and so forth. Although 5G has not been standardised yet, these above technologies have been studied in both academia and industry and the goal of the research is to enhance and improve the system capacity for 5G networks and beyond by studying some key problems and providing some effective solutions existing in the above technologies from system implementation and hardware impairments’ perspective. The key problems studied in this thesis include interference cancellation in HetNet, impairments calibration for massive MIMO, channel state estimation for VLC, and low latency parallel Turbo decoding technique. Firstly, inter-cell interference in HetNet is studied and a cell specific reference signal (CRS) interference cancellation method is proposed to mitigate the performance degrade in enhanced inter-cell interference coordination (eICIC). This method takes carrier frequency offset (CFO) and timing offset (TO) of the user’s received signal into account. By reconstructing the interfering signal and cancelling it afterwards, the capacity of HetNet is enhanced. Secondly, for massive MIMO systems, the radio frequency (RF) impairments of the hardware will degrade the beamforming performance. When operated in time duplex division (TDD) mode, a massive MIMO system relies on the reciprocity of the channel which can be broken by the transmitter and receiver RF impairments. Impairments calibration has been studied and a closed-loop reciprocity calibration method is proposed in this thesis. A test device (TD) is introduced in this calibration method that can estimate the transmitters’ impairments over-the-air and feed the results back to the base station via the Internet. The uplink pilots sent by the TD can assist the BS receivers’ impairment estimation. With both the uplink and downlink impairments estimates, the reciprocity calibration coefficients can be obtained. By computer simulation and lab experiment, the performance of the proposed method is evaluated. Channel coding is an essential part of a wireless communication system which helps fight with noise and get correct information delivery. Turbo codes is one of the most reliable codes that has been used in many standards such as WiMAX and LTE. However, the decoding process of turbo codes is time-consuming and the decoding latency should be improved to meet the requirement of the future network. A reverse interleave address generator is proposed that can reduce the decoding time and a low latency parallel turbo decoder has been implemented on a FPGA platform. The simulation and experiment results prove the effectiveness of the address generator and show that there is a trade-off between latency and throughput with a limited hardware resource. Apart from the above contributions, this thesis also investigated multi-user precoding for MIMO VLC systems. As a green and secure technology, VLC is achieving more and more attention and could become a part of 5G network especially for indoor communication. For indoor scenario, the MIMO VLC channel could be easily ill-conditioned. Hence, it is important to study the impact of the channel state to the precoding performance. A channel state estimation method is proposed based on the signal to interference noise ratio (SINR) of the users’ received signal. Simulation results show that it can enhance the capacity of the indoor MIMO VLC system