Quantifying Potential Energy Efficiency Gain in Green Cellular Wireless Networks

Conventional cellular wireless networks were designed with the purpose of providing high throughput for the user and high capacity for the service provider, without any provisions of energy efficiency. As a result, these networks have an enormous Carbon footprint. In this paper, we describe the sources of the inefficiencies in such networks. First we present results of the studies on how much Carbon footprint such networks generate. We also discuss how much more mobile traffic is expected to increase so that this Carbon footprint will even increase tremendously more. We then discuss specific sources of inefficiency and potential sources of improvement at the physical layer as well as at higher layers of the communication protocol hierarchy. In particular, considering that most of the energy inefficiency in cellular wireless networks is at the base stations, we discuss multi-tier networks and point to the potential of exploiting mobility patterns in order to use base station energy judiciously. We then investigate potential methods to reduce this inefficiency and quantify their individual contributions. By a consideration of the combination of all potential gains, we conclude that an improvement in energy consumption in cellular wireless networks by two orders of magnitude, or even more, is possible.Comment: arXiv admin note: text overlap with arXiv:1210.843

Network coding-aided MAC protocols for cooperative wireless networks

The introduction of third generation (3G) technologies has caused a vast proliferation of wireless devices and networks, generating an increasing demand for high level Quality of Service (QoS). The wide spread of mobile applications has further reinforced the user need for communication, motivating at the same time the concepts of user cooperation and data dissemination. However, this trend towards continuous exchange of information and ubiquitous connectivity is inherently restricted by the energy-greedy functionalities of high-end devices. These limitations, along with the pressure exerted on the Information and Communications Technology (ICT) industry towards energy awareness, have induced the design of novel energy efficient schemes and algorithms. In this context, the Medium Access Control (MAC) layer plays a key role, since it is mainly responsible for the channel access regulation, the transmission scheduling and the resource allocation, thus constituting an appropriate point to effectively address energy efficiency issues that arise due to the users overcrowding. This dissertation provides a contribution to the design, analysis and evaluation of novel MAC protocols for cooperative wireless networks. In our attempt to design energy efficient MAC schemes, we were extensively assisted by the introduction of new techniques, such as Network Coding (NC), that intrinsically bring considerable gains in system performance. The main thesis contributions are divided into two parts. The first part presents NCCARQ, a novel NC-aided Cooperative Automatic Repeat reQuest (ARQ) MAC protocol for wireless networks. NCCARQ introduces a new access paradigm for cooperative ARQ schemes, exploiting NC benefits in bidirectional communication among wireless users. The NCCARQ performance in terms of QoS and energy efficiency is assessed by means of analytical probabilistic models and extensive computer-based simulations, revealing the significant gains we can achieve compared to standardized MAC solutions. In addition, the impact of realistic wireless channel conditions on the MAC protocol operation further motivated us to study the NCCARQ performance in wireless links affected by correlated shadowing, showing that the channel correlation may adversely affect the distributed cooperation benefits. The second part of the thesis is dedicated to the investigation of MAC issues in wireless data dissemination scenarios. In particular, the existence of multiple source nodes in such scenarios generates conflicting situations, considering the selfish behavior of the wireless devices that want to maximize their battery lifetime. Bearing in mind the energy efficiency importance, we propose game theoretic medium access strategies, applying energy-based utility functions which inherently imply energy awareness. In addition, Random Linear NC (RLNC) techniques are adopted to eliminate the need of exchanging excessive control packets, while Analog NC (ANC) is employed to efface the impact of collisions throughout the communication. During the elaboration of this thesis, two general key conclusions have been extracted. First, there is a fundamental requirement for implementation of new MAC protocols in order to effectively deal with state-of-the-art techniques (e.g., NC), recently introduced to enhance both the performance and the energy efficiency of the network. Second, we highlight the importance of designing novel energy efficient MAC protocols, taking into account that traditional approaches - designed mainly to assist the collision avoidance in wireless networks - tend to be obsolete.La presente tesis doctoral contribuye al diseño, análisis y evaluación de nuevos protocolos MAC cooperativos para redes inalámbricas. La introducción de nuevas técnicas, tales como la codificación de red (NC), que intrínsecamente llevan un considerable aumento en el rendimiento del sistema, nos ayudó ampliamente durante el diseño de protocolos MAC energéticamente eficientes. Las principales contribuciones de esta tesis se dividen en dos partes. La primera parte presenta el NCCARQ, un protocolo cooperativo de retransmisión automática (ARQ), asistido por NC para redes inalámbricas. La segunda parte de la tesis se centra en el diseño de protocolos de capa MAC en escenarios inalámbricos de difusión de datos. Teniendo en cuenta la importancia de la eficiencia energética, se proponen técnicas de acceso al medio basadas en teoría de juegos dónde las funciones objetivo están motivadas por el consumo energético. Las soluciones propuestas son evaluadas por medio de modelos analíticos y simulaciones por ordenador

Two-path succesive relaying schemes in the presence of inter-relay interference

Relaying is a promising technique to improve wireless network performance. A conventional relay transmits and receives signals in two orthogonal channels due to half duplex constraint of wireless network. This results in inefficient use of spectral resources. Two-Path Successive Relaying (TPSR) has been proposed to recover loss in spectral efficiency. However, the performance of TPSR is degraded by Inter-Relay Interference (IRI). This thesis investigates the performance of TPSR affected by IRI and proposes several schemes to improve relaying reliability, throughput and secrecy. Simulations revealed that the existing TPSR could perform worse than the conventional Half Duplex Relaying (HDR) scheme. Opportunistic TPSR schemes are proposed to improve the capacity performance. Several relay pair selection criteria are developed to ensure the selection of the best performing relay pair. Adaptive schemes which dynamically switch between TPSR and conventional HDR are proposed to further improve the performance. Simulation and analytical results show that the proposed schemes can achieve up to 45% ergodic capacity improvement and lower outage probability compared to baseline schemes, while achieving the maximum diversity and multiplexing tradeoff of the multi-input single-output channel. In addition, this thesis proposes secrecy TPSR schemes to protect secrecy of wireless transmission from eavesdropper. The use of two relays in the proposed schemes deliver more robust secrecy transmission while the use of scheduled jamming signals improves secrecy rate. Simulation and analytical results reveal that the proposed schemes can achieve up to 62% ergodic secrecy capacity improvement and quadratically lower intercept and secrecy outage probabilities if compared to existing schemes. Overall, this thesis demonstrates that the proposed TPSR schemes are able to deliver performance improvement in terms of throughput, reliability and secrecy in the presence of IRI

Opportunistic Routing with Network Coding in Powerline Communications

Opportunistic Routing (OR) can be used as an alternative to the legacy routing (LR) protocols in networks with a broadcast lossy channel and possibility of overhearing the signal. The power line medium creates such an environment. OR can better exploit the channel than LR because it allows the cooperation of all nodes that receive any data. With LR, only a chain of nodes is selected for communication. Other nodes drop the received information. We investigate OR for the one-source one-destination scenario with one traffic flow. First, we evaluate the upper bound on the achievable data rate and advocate the decentralized algorithm for its calculation. This knowledge is used in the design of Basic Routing Rules (BRR). They use the link quality metric that equals the upper bound on the achievable data rate between the given node and the destination. We call it the node priority. It considers the possibility of multi-path communication and the packet loss correlation. BRR allows achieving the optimal data rate pertaining certain theoretical assumptions. The Extended BRR (BRR-E) are free of them. The major difference between BRR and BRR-E lies in the usage of Network Coding (NC) for prognosis of the feedback. In this way, the protocol overhead can be severely reduced. We also study Automatic Repeat-reQuest (ARQ) mechanism that is applicable with OR. It differs to ARQ with LR in that each sender has several sinks and none of the sinks except destination require the full recovery of the original message. Using BRR-E, ARQ and other services like network initialization and link state control, we design the Advanced Network Coding based Opportunistic Routing protocol (ANChOR). With the analytic and simulation results we demonstrate the near optimum performance of ANChOR. For the triangular topology, the achievable data rate is just 2% away from the theoretical maximum and it is up to 90% higher than it is possible to achieve with LR. Using the G.hn standard, we also show the full protocol stack simulation results (including IP/UDP and realistic channel model). In this simulation we revealed that the gain of OR to LR can be even more increased by reducing the head-of-the-line problem in ARQ. Even considering the ANChOR overhead through additional headers and feedbacks, it outperforms the original G.hn setup in data rate up to 40% and in latency up to 60%.:1 Introduction 2 1.1 Intra-flow Network Coding 6 1.2 Random Linear Network Coding (RLNC) 7 2 Performance Limits of Routing Protocols in PowerLine Communications (PLC) 13 2.1 System model 14 2.2 Channel model 14 2.3 Upper bound on the achievable data rate 16 2.4 Achieving the upper bound data rate 17 2.5 Potential gain of Opportunistic Routing Protocol (ORP) over Common Single-path Routing Protocol (CSPR) 19 2.6 Evaluation of ORP potential 19 3 Opportunistic Routing: Realizations and Challenges 24 3.1 Vertex priority and cooperation group 26 3.2 Transmission policy in idealized network 34 3.2.1 Basic Routing Rules (BRR) 36 3.3 Transmission policy in real network 40 3.3.1 Purpose of Network Coding (NC) in ORP 41 3.3.2 Extended Basic Routing Rules (BRR) (BRR-E) 43 3.4 Automatic ReQuest reply (ARQ) 50 3.4.1 Retransmission request message contents 51 3.4.2 Retransmission Request (RR) origination and forwarding 66 3.4.3 Retransmission response 67 3.5 Congestion control 68 3.5.1 Congestion control in our work 70 3.6 Network initialization 74 3.7 Formation of the cooperation groups (coalitions) 76 3.8 Advanced Network Coding based Opportunistic Routing protocol (ANChOR) header 77 3.9 Communication of protocol information 77 3.10 ANChOR simulation . .79 3.10.1 ANChOR information in real time .80 3.10.2 Selection of the coding rate 87 3.10.3 Routing Protocol Information (RPI) broadcasting frequency 89 3.10.4 RR contents 91 3.10.5 Selection of RR forwarder 92 3.10.6 ANChOR stability 92 3.11 Summary 95 4 ANChOR in the Gigabit Home Network (G.hn) Protocol 97 4.1 Compatibility with the PLC protocol stack 99 4.2 Channel and noise model 101 4.2.1 In-home scenario 102 4.2.2 Access network scenario 102 4.3 Physical layer (PHY) layer implementation 102 4.3.1 Bit Allocation Algorithm (BAA) 103 4.4 Multiple Access Control layer (MAC) layer 109 4.5 Logical Link Control layer (LLC) layer 111 4.5.1 Reference Automatic Repeat reQuest (ARQ) 111 4.5.2 Hybrid Automatic Repeat reQuest (HARQ) in ANChOR 114 4.5.3 Modeling Protocol Data Unit (PDU) erasures on LLC 116 4.6 Summary 117 5 Study of G.hn with ANChOR 119 5.1 ARQ analysis 119 5.2 Medium and PHY requirements for “good” cooperation 125 5.3 Access network scenario 128 5.4 In-home scenario 135 5.4.1 Modeling packet erasures 136 5.4.2 Linear Dependence Ratio (LDR) 139 5.4.3 Worst case scenario 143 5.4.4 Analysis of in-home topologies 145 6 Conclusions . . . . . . . . . . . . . . . 154 A Proof of the neccessity of the exclusion rule 160 B Gain of ORPs to CSRPs 163 C Broadcasting rule 165 D Proof of optimality of BRR for triangular topology 167 E Reducing the retransmission probability 168 F Calculation of Expected Average number of transmissions (EAX) for topologies with bi-directional links 170 G Feedback overhead of full coding matrices 174 H Block diagram of G.hn physical layer in ns-3 model 175 I PER to BER mapping 17

Communications for smart grid substation monitoring using WIMAX protocol

The SMARTGRID is a general term for a series of infrastructural changes applied to the electric transmission and distribution systems. By using the latest communication and computing technology, additional options such as Condition Monitoring can now be implemented to further improve and optimise complex electricity supply grid operation. Lifecycle optimisation of high voltage assets and other system components in the utility provide a case in point. Today Utility experts agree that application of scheduled maintenance is not the effective use of resources. To reduce maintenance expenses and unnecessary outages and repairs of equipment due to scheduled maintenance, utilities are adopting condition based approaches. Real time online monitoring of substation parameters can be achieved by retrofitting the existing substation with SMARTGRID technology. The IEC 61850 is a common protocol meant for Substation Automation Systems, designed for the purpose of establishing interoperability, one that all manufacturers of all different assets must comply with. This thesis advocates the estimation of bandwidth required for monitoring a substation after retrofitting the existing substation with smart communication technologies. This includes establishing a latest wireless communication infrastructure from the substation to the control centre and evaluating the performance modelling and simulating the physical layer of communication technologies such as WIMAX (IEEE802.16) and MICROWAVE point to point using MATLAB SIMULINK and RADIO mobile online simulation software. Also, link budget of the satellite communication for the same application is calculated. Satellite communication in this case is considered as a redundant or back up technology to ensure that the communication between entities is continuous. On performing the simulation on different environments the results prove that the selected protocols are best suited for condition monitoring. The measured Latency could be the best approximated value which complies with the current objective. However the white noise that exists in the substation has significant hazard with respect to the security of the wireless network. To compensate this constraint whole substation is hard wired by means of plastic fibre optics and the data sent to the base station located near the substation

Channel Estimation in Half and Full Duplex Relays

abstract: Both two-way relays (TWR) and full-duplex (FD) radios are spectrally efficient, and their integration shows great potential to further improve the spectral efficiency, which offers a solution to the fifth generation wireless systems. High quality channel state information (CSI) are the key components for the implementation and the performance of the FD TWR system, making channel estimation in FD TWRs crucial. The impact of channel estimation on spectral efficiency in half-duplex multiple-input-multiple-output (MIMO) TWR systems is investigated. The trade-off between training and data energy is proposed. In the case that two sources are symmetric in power and number of antennas, a closed-form for the optimal ratio of data energy to total energy is derived. It can be shown that the achievable rate is a monotonically increasing function of the data length. The asymmetric case is discussed as well. Efficient and accurate training schemes for FD TWRs are essential for profiting from the inherent spectrally efficient structures of both FD and TWRs. A novel one-block training scheme with a maximum likelihood (ML) estimator is proposed to estimate the channels between the nodes and the residual self-interference (RSI) channel simultaneously. Baseline training schemes are also considered to compare with the one-block scheme. The Cramer-Rao bounds (CRBs) of the training schemes are derived and analyzed by using the asymptotic properties of Toeplitz matrices. The benefit of estimating the RSI channel is shown analytically in terms of Fisher information. To obtain fundamental and analytic results of how the RSI affects the spectral efficiency, one-way FD relay systems are studied. Optimal training design and ML channel estimation are proposed to estimate the RSI channel. The CRBs are derived and analyzed in closed-form so that the optimal training sequence can be found via minimizing the CRB. Extensions of the training scheme to frequency-selective channels and multiple relays are also presented. Simultaneously sensing and transmission in an FD cognitive radio system with MIMO is considered. The trade-off between the transmission rate and the detection accuracy is characterized by the sum-rate of the primary and the secondary users. Different beamforming and combining schemes are proposed and compared.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201