A coupled remote sensing and the Surface Energy Balance with Topography Algorithm (SEBTA) to estimate actual evapotranspiration over heterogeneous terrain

Evapotranspiration (ET) may be used as an ecological indicator to address the ecosystem complexity. The accurate measurement of ET is of great significance for studying environmental sustainability, global climate changes, and biodiversity. Remote sensing technologies are capable of monitoring both energy and water fluxes on the surface of the Earth. With this advancement, existing models, such as SEBAL, S_SEBI and SEBS, enable us to estimate the regional ET with limited temporal and spatial coverage in the study areas. This paper extends the existing modeling efforts with the inclusion of new components for ET estimation at different temporal and spatial scales under heterogeneous terrain with varying elevations, slopes and aspects. Following a coupled remote sensing and surface energy balance approach, this study emphasizes the structure and function of the Surface Energy Balance with Topography Algorithm (SEBTA). With the aid of the elevation and landscape information, such as slope and aspect parameters derived from the digital elevation model (DEM), and the vegetation cover derived from satellite images, the SEBTA can account for the dynamic impacts of heterogeneous terrain and changing land cover with some varying kinetic parameters (i.e., roughness and zero-plane displacement). Besides, the dry and wet pixels can be recognized automatically and dynamically in image processing thereby making the SEBTA more sensitive to derive the sensible heat flux for ET estimation. To prove the application potential, the SEBTA was carried out to present the robust estimates of 24 h solar radiation over time, which leads to the smooth simulation of the ET over seasons in northern China where the regional climate and vegetation cover in different seasons compound the ET calculations. The SEBTA was validated by the measured data at the ground level. During validation, it shows that the consistency index reached 0.92 and the correlation coefficient was 0.87

Surface Soil Moisture Retrievals from Remote Sensing:Current Status, Products & Future Trends

Advances in Earth Observation (EO) technology, particularly over the last two decades, have shown that soil moisture content (SMC) can be measured to some degree or other by all regions of the electromagnetic spectrum, and a variety of techniques have been proposed to facilitate this purpose. In this review we provide a synthesis of the efforts made during the last 20 years or so towards the estimation of surface SMC exploiting EO imagery, with a particular emphasis on retrievals from microwave sensors. Rather than replicating previous overview works, we provide a comprehensive and critical exploration of all the major approaches employed for retrieving SMC in a range of different global ecosystems. In this framework, we consider the newest techniques developed within optical and thermal infrared remote sensing, active and passive microwave domains, as well as assimilation or synergistic approaches. Future trends and prospects of EO for the accurate determination of SMC from space are subject to key challenges, some of which are identified and discussed within. It is evident from this review that there is potential for more accurate estimation of SMC exploiting EO technology, particularly so, by exploring the use of synergistic approaches between a variety of EO instruments. Given the importance of SMC in Earth’s land surface interactions and to a large range of applications, one can appreciate that its accurate estimation is critical in addressing key scientific and practical challenges in today’s world such as food security, sustainable planning and management of water resources. The launch of new, more sophisticated satellites strengthens the development of innovative research approaches and scientific inventions that will result in a range of pioneering and ground-breaking advancements in the retrievals of soil moisture from space

A global long-term (1981–2000) land surface temperature product for NOAA AVHRR

Land surface temperature (LST) plays an important role in the research of climate change and various land surface processes. Before 2000, global LST products with relatively high temporal and spatial resolutions are scarce, despite a variety of operational satellite LST products. In this study, a global 0.05∘×0.05∘ historical LST product is generated from NOAA advanced very-high-resolution radiometer (AVHRR) data (1981–2000), which includes three data layers: (1) instantaneous LST, a product generated by integrating several split-window algorithms with a random forest (RF-SWA); (2) orbital-drift-corrected (ODC) LST, a drift-corrected version of RF-SWA LST; and (3) monthly averages of ODC LST. For an assumed maximum uncertainty in emissivity and column water vapor content of 0.04 and 1.0 g cm−2, respectively, evaluated against the simulation dataset, the RF-SWA method has a mean bias error (MBE) of less than 0.10 K and a standard deviation (SD) of 1.10 K. To compensate for the influence of orbital drift on LST, the retrieved RF-SWA LST was normalized with an improved ODC method. The RF-SWA LST were validated with in situ LST from Surface Radiation Budget (SURFRAD) sites and water temperatures obtained from the National Data Buoy Center (NDBC). Against the in situ LST, the RF-SWA LST has a MBE of 0.03 K with a range of −1.59–2.71 K, and SD is 1.18 K with a range of 0.84–2.76 K. Since water temperature only changes slowly, the validation of ODC LST was limited to SURFRAD sites, for which the MBE is 0.54 K with a range of −1.05 to 3.01 K and SD is 3.57 K with a range of 2.34 to 3.69 K, indicating good product accuracy. As global historical datasets, the new AVHRR LST products are useful for filling the gaps in long-term LST data. Furthermore, the new LST products can be used as input to related land surface models and environmental applications. Furthermore, in support of the scientific research community, the datasets are freely available at https://doi.org/10.5281/zenodo.3934354 for RF-SWA LST (Ma et al., 2020a), https://doi.org/10.5281/zenodo.3936627 for ODC LST (Ma et al., 2020c), and https://doi.org/10.5281/zenodo.3936641 for monthly averaged LST (Ma et al., 2020b)

Estimation of Surface Moisture Content and Evapotranspiration Using Weightage Approach.

Soil moisture (MC) and evapotranspiration (ET) are considered as the most significant boundary conditions controlling most of the hydrological cycle’s processes. However, monitoring them continuously over large areas using the high temporal-resolution optical satellites is very demanding. Satellites such as the Advanced Very High Resolution Radiometer (AVHRR) and the Moderate Resolution Imaging Spectroradiometer (MODIS), have a coarse spatial resolution in their images. Thus it not only impedes the acquisition of an accurate MC and ET but also represents multispectral reflections from the holistic surface features. This beside their dependence on vegetation and ground coefficient when assessing MC and ET. The study aims to enhance the spatial accuracy by weighting the MC produced from different surface cover classes within the pixel. MC for each pixel is segmented into three (3) different classes namely urban, vegetation and multi surface cover according to their respective MC weightage. Secondly, to generate an improved actual ETa map by overlaying the segmented MC with a rectified ETo. Images from AVHRR and MODIS satellites were selected in order to generate MC and ET maps. Two powerful MC algorithms were used based on land Surface Temperature (Ts), vegetation Indices (VI) and field measurements of MC; which were conducted at variable depths to examine the depth influence on MC and Ts magnitudes

Understanding and Improving the Soil Moisture Retrieval Algorithm under Space, Time and Heterogeneity

The spatial and temporal monitoring of soil moisture from remote sensing platforms plays a pivotal role in predicting the future food and water security. That is, improving soil moisture estimation at remote sensing platforms has remarkable impacts in the fields of meteorology, hydrology, agriculture, and global climate change. However, remote sensing of soil moisture for long is hindered by spatial heterogeneity in land surface variables (soil, biomass, topography, and temperature) which cause systematic and random errors in soil moisture retrievals. Most soil moisture improvement methods to date focused on the downscaling of either coarse resolution soil moisture or brightness temperature based on fine scale ancillary information of land surface variables. Comparatively little work has been done on improving the parameterization of most sensitive variables to radiative transfer model that impact soil moisture retrieval accuracy. In addition, the classic radiative transfer model assumes the vegetation and surface roughness parameters, as constant with space and time which undermines the retrieval accuracy. Also, it is largely elusive so far the discussion on the non-linearity of microwave radiative transfer model and its relationship with energy and water fluxes. In order to address the above mentioned limitations, this dissertation aims to develop and validate a soil moisture modeling framework with associated improved parameterizations for surface roughness and vegetation optical depth (VOD) in the homogeneous and heterogeneous environments. To this end, the following research work is specifically conducted: (a) conduct comprehensive sensitivity analysis on radiative transfer model with space, time and hydroclimates; (b) develop multi-scale surface roughness model which incorporates small (soil) and large (topography) surface undulations to improve soil moisture retrievals; (c) improve the parameterization of vegetation topical depth (VOD) using within-pixel biomass heterogeneity to improved soil moisture accuracy; (d) investigate the non-linearity in microwave radiative transfer model, and its association with thermal energy fluxes. The results of this study showed that: (a) the total (linear + non-linear) sensitivity of soil, temperature and biomass variables varied with spatial scale (support), time, and hydro climates, with higher non-linearity observed for dense biomass regions. This non-linearity is also governed by soil moisture availability and temperature. Among these variables, surface roughness and vegetation optical depth are most sensitive variables to radiative transfer model (RTM); (b) considering the spatial and temporal variability in parameterization of surface roughness and VOD has improved soil moisture retrieval accuracy, importantly in cropland and forest environments; and (c) the soil moisture estimated through evaporative fraction (EF) correlates higher with VOD corrected soil moisture

Monitoring crops water needs at high spatio-temporal resolution by synergy of optical/thermal and radar observations

L'optimisation de la gestion de l'eau en agriculture est essentielle dans les zones semi-arides afin de préserver les ressources en eau qui sont déjà faibles et erratiques dues à des actions humaines et au changement climatique. Cette thèse vise à utiliser la synergie des observations de télédétection multispectrales (données radar, optiques et thermiques) pour un suivi à haute résolution spatio-temporelle des besoins en eau des cultures. Dans ce contexte, différentes approches utilisant divers capteurs (Landsat-7/8, Sentinel-1 et MODIS) ont été developpées pour apporter une information sur l'humidité du sol (SM) et le stress hydrique des cultures à une échelle spatio-temporelle pertinente pour la gestion de l'irrigation. Ce travail va parfaitement dans le sens des objectifs du projet REC "Root zone soil moisture Estimates at the daily and agricultural parcel scales for Crop irrigation management and water use impact: a multi-sensor remote sensing approach" (http://rec.isardsat.com/) qui visent à estimer l'humidité du sol dans la zone racinaire (RZSM) afin d'optimiser la gestion de l'eau d'irrigation. Des approches innovantes et prometteuses sont mises en place pour estimer l'évapotranspiration (ET), RZSM, la température de surface du sol (LST) et le stress hydrique de la végétation à travers des indices de SM dérivés des observations multispectrales à haute résolution spatio-temporelle. Les méthodologies proposées reposent sur des méthodes basées sur l'imagerie, la modélisation du transfert radiatif et la modélisation du bilan hydrique et d'énergie et sont appliquées dans une région à climat semi-aride (centre du Maroc). Dans le cadre de ma thèse, trois axes ont été explorés. Dans le premier axe, un indice de RZSM dérivé de LST-Landsat est utilisé pour estimer l'ET sur des parcelles de blé et des sols nus. L'estimation par modélisation de ET a été explorée en utilisant l'équation de Penman-monteith modifiée obtenue en introduisant une relation empirique simple entre la résistance de surface (rc) et l'indice de RZSM. Ce dernier est estimé à partir de la température de surface (LST) dérivée de Landsat, combinée avec les températures extrêmes (en conditions humides et sèches) simulée par un modèle de bilan d'énergie de surface piloté par le forçage météorologique et la fraction de couverture végétale dérivée de Landsat. La méthode utilisée est calibrée et validée sur deux parcelles de blé situées dans la même zone près de Marrakech au Maroc. Dans l'axe suivant, une méthode permettant de récupérer la SM de la surface (0-5 cm) à une résolution spatiale et temporelle élevée est développée à partir d'une synergie entre données radar (Sentinel-1) et thermique (Landsat) et en utilisant un modèle de bilan d'énergie du sol. L'approche développée a été validée sur des parcelles agricoles en sol nu et elle donne une estimation précise de la SM avec une différence quadratique moyenne en comparant à la SM in situ, égale à 0,03 m3 m-3. Dans le dernier axe, une nouvelle méthode est développée pour désagréger la MODIS LST de 1 km à 100 m de résolution en intégrant le SM proche de la surface dérivée des données radar Sentinel-1 et l'indice de végétation optique dérivé des observations Landsat. Le nouvel algorithme, qui inclut la rétrodiffusion S-1 en tant qu'entrée dans la désagrégation, produit des résultats plus stables et robustes au cours de l'année sélectionnée. Dont, 3,35 °C était le RMSE le plus bas et 0,75 le coefficient de corrélation le plus élevé évalués en utilisant le nouvel algorithme.Optimizing water management in agriculture is essential over semi-arid areas in order to preserve water resources which are already low and erratic due to human actions and climate change. This thesis aims to use the synergy of multispectral remote sensing observations (radar, optical and thermal data) for high spatio-temporal resolution monitoring of crops water needs. In this context, different approaches using various sensors (Landsat-7/8, Sentinel-1 and MODIS) have been developed to provide information on the crop Soil Moisture (SM) and water stress at a spatio-temporal scale relevant to irrigation management. This work fits well the REC "Root zone soil moisture Estimates at the daily and agricultural parcel scales for Crop irrigation management and water use impact: a multi-sensor remote sensing approach" (http://rec.isardsat.com/) project objectives, which aim to estimate the Root Zone Soil Moisture (RZSM) for optimizing the management of irrigation water. Innovative and promising approaches are set up to estimate evapotranspiration (ET), RZSM, land surface temperature (LST) and vegetation water stress through SM indices derived from multispectral observations with high spatio-temporal resolution. The proposed methodologies rely on image-based methods, radiative transfer modelling and water and energy balance modelling and are applied in a semi-arid climate region (central Morocco). In the frame of my PhD thesis, three axes have been investigated. In the first axis, a Landsat LST-derived RZSM index is used to estimate the ET over wheat parcels and bare soil. The ET modelling estimation is explored using a modified Penman-Monteith equation obtained by introducing a simple empirical relationship between surface resistance (rc) and a RZSM index. The later is estimated from Landsat-derived land surface temperature (LST) combined with the LST endmembers (in wet and dry conditions) simulated by a surface energy balance model driven by meteorological forcing and Landsat-derived fractional vegetation cover. The investigated method is calibrated and validated over two wheat parcels located in the same area near Marrakech City in Morocco. In the next axis, a method to retrieve near surface (0-5 cm) SM at high spatial and temporal resolution is developed from a synergy between radar (Sentinel-1) and thermal (Landsat) data and by using a soil energy balance model. The developed approach is validated over bare soil agricultural fields and gives an accurate estimates of near surface SM with a root mean square difference compared to in situ SM equal to 0.03 m3 m-3. In the final axis a new method is developed to disaggregate the 1 km resolution MODIS LST at 100 m resolution by integrating the near surface SM derived from Sentinel-1 radar data and the optical-vegetation index derived from Landsat observations. The new algorithm including the S-1 backscatter as input to the disaggregation, produces more stable and robust results during the selected year. Where, 3.35 °C and 0.75 were the lowest RMSE and the highest correlation coefficient assessed using the new algorithm

Remote sensing of energy and water fluxes over Volta Savannah catchments in West Africa

The deterioration of the West African savannah in the last three decades is believed to be closely linked with about 0.5 C rise in temperature leading to evaporation losses and declining levels of the Volta Lake in Ghana. Although hydrological models can be used to predict climate change impacts on the regional hydrology, spatially-observed ground data needed for this purpose are largely unavailable. This thesis seeks to address this problem by developing improved methods for estimating energy and water fluxes (e.g. latent heat [ET]) from remotely sensed data and to demonstrate how these may be used to parameterize hydrological models. The first part of the thesis examines the potential of the Penman-Monteith method to estimate local-scale ET using groundbased hydrometeorological observations, vegetation coefficients and environmental data. The model results were compared with pan observations, scintillometer (eddy correlation) measurements and the Thomthwaite empirical method. The Penman- Monteith model produced better evaporation estimates (~3.90 mm day(^-1) for the Tamale district) than its counterpart methods. The Thomthwaite, for example, overestimated predictions by 5.0-11.0 mm day(^-1). Up-scaling on a monthly time scale and parameterization of the Grindley soil moisture balance model with the Thomthwaite and Penman-Monteith data, however, produced similar estimates of actual evaporation and soil moisture, which correlated strongly (R(^2) = 0.95) with water balance estimates. To improve ET estimation at the regional-scale, the second part of the thesis develops spatial models through energy balance modelling and data up-scaling methods, driven by radiometric measurements from recent satellite sensors such as the Landsat ETM+, MODIS and ENVISAT-AATSR. The results were validated using estimates from the Penman-Monteith method, field observations, detailed satellite measurements and published data. It was realised that the MODIS sensor is a more useful source of energy and water balance parameters than AA TSR. For example, stronger correlations were found between MODIS estimates of ET and other energy balance variables such as NDVI, surface temperature and net radiation (R(^2) = 0.67-0.73) compared with AATSR estimates (R(^2) = 0.31-0.40). There was also a good spatial correlation between MODIS and Landsat ETM+ results (R(^2) = 0.71), but poor correlations were found between AATSR and Landsat data (R(^2) = 0.0-0.13), which may be explained by differences in instrument calibration. The results further showed that ET may be underestimated with deviations of ~2.0 mm day 1 when MODIS/AATSR measurements are validated against point observations because of spatial mismatch. The final part of the thesis demonstrates the application of the ET model for predicting runoff (Q) using a simplified version of the regional water balance equation. This is followed byanalysis of flow sensitivity to declining scenarios of biomass volume. The results showed the absence of Q for >90% of the study area during the dry season due largely to crude model approximation and lack of rainfall data, which makes model testing during the wet season important. Runoff prediction may be improved if spatial estimates of rainfall, ET and geographical data (e.g. land-use/cover maps, soil & geology maps and DEM) could be routinely derived from satellite imagery

Analysis of the spatial heterogeneity of land surface parameters and energy flux densities

This work was written as a cumulative doctoral thesis based on reviewed publications. Climate projections are mainly based on the results of numeric simulations from global or regional climate models. Up to now processes between atmosphere and land surface are only rudimentarily known. This causes one of the major uncertainties in existing models. In order to reduce parameterisation uncertainties and to find a reasonable description of sub grid heterogeneities, the determination and evaluation of parameterisation schemes for modelling require as many datasets from different spatial scales as possible. This work contributes to this topic by implying different datasets from different platforms. Its objective was to analyse the spatial heterogeneity of land surface parameters and energy flux densities obtained from both satellite observations with different spatial and temporal resolutions and in-situ measurements. The investigations were carried out for two target areas in Germany. First, satellite data for the years 2002 and 2003 were analysed and validated from the LITFASS-area (Lindenberg Inhomogeneous Terrain - Fluxes between Atmosphere and Surface: a longterm Study). Second, the data from the experimental field sites of the FLUXNET cluster around Tharandt from the years 2006 and 2007 were used to determine the NDVI (Normalised Difference Vegetation Index for identifying vegetated areas and their "condition"). The core of the study was the determination of land surface characteristics and hence radiant and energy flux densities (net radiation, soil heat flux, sensible and latent heat flux) using the three optical satellite sensors ETM+ (Enhanced Thematic Mapper), MODIS (Moderate Resolution Imaging Spektroradiometer) and AVHRR 3 (Advanced Very High Resolution Radiometer) with different spatial (30 m – 1 km) and temporal (1 day – 16 days) resolution. Different sensor characteristics and different data sets for land use classifications can both lead to deviations of the resultant energy fluxes between the sensors. Thus, sensor differences were quantified, sensor adaptation methods were implemented and a quality analysis for land use classifications was performed. The result is then a single parameterisation scheme that allows for the determination of the energy fluxes from all three different sensors. The main focus was the derivation of the latent heat flux (L.E) using the Penman-Monteith (P-M) approach. Satellite data provide measurements of spectral reflectance and surface temperatures. The P-M approach requires further surface parameters not offered by satellite data. These parameters include the NDVI, Leaf Area Index (LAI), wind speed, relative humidity, vegetation height and roughness length, for example. They were derived indirectly from the given satellite- or in-situ measurements. If no data were available so called default values from literature were taken. The quality of these parameters strongly influenced the exactness of the radiant- and energy fluxes. Sensitivity studies showed that NDVI is one of the most important parameters for determination of evaporation. In contrast it could be shown, that the parameters as vegetation height and measurement height have only minor influence on L.E, which justifies the use of default values for these parameters. Due to the key role of NDVI a field study was carried out investigating the spatial variability and sensitivity of NDVI above five different land use types (winter wheat, corn, grass, beech and spruce). Methods to determine this parameter not only from space (spectral), but also from in-situ tower measurements (broadband) and spectrometer data (spectral) were compared. The best agreement between the methods was found for winter wheat and grass measurements in 2006. For these land use types the results differed by less than 10 % and 15 %, respectively. Larger differences were obtained for the forest measurements. The correlation between the daily MODIS-NDVI data and the in-situ NDVI inferred from the spectrometer and the broadband measurements were r=0.67 and r=0.51, respectively. Subsequently, spatial variability of land surface parameters and fluxes were analysed. The several spatial resolutions of the satellite sensors can be used to describe subscale heterogeneity from one scale to the other and to study the effects of spatial averaging. Therefore land use dependent parameters and fluxes were investigated to find typical distribution patterns of land surface properties and energy fluxes. Implying the distribution patterns found here for albedo and NDVI from ETM+ data in models has high potential to calculate representative energy flux distributions on a coarser scale. The distribution patterns were expressed as probability density functions (PDFs). First results of applying PDFs of albedo, NDVI, relative humidity, and wind speed to the L.E computation are encouraging, and they show the high potential of this method. Summing up, the method of satellite based surface parameter- and energy flux determination has been shown to work reliably on different temporal and spatial scales. The data are useful for detailed analyses of spatial variability of a landscape and for the description of sub grid heterogeneity, as it is needed in model applications. Their usability as input parameters for modelling on different scales is the second important result of this work. The derived vegetation parameters, e.g. LAI and plant cover, possess realistic values and were used as model input for the Lokalmodell of the German Weather Service. This significantly improved the model results for L.E. Additionally, thermal parameter fields, e.g. surface temperature from ETM+ with 30 m spatial resolution, were used as input for SVAT-modelling (Soil-Vegetation-Atmosphere-Transfer scheme). Thus, more realistic L.E results were obtained, providing highly resolved areal information.Die vorliegende Arbeit wurde auf der Grundlage begutachteter Publikationen als kumulative Dissertation verfasst. Klimaprognosen basieren im Allgemeinen auf den Ergebnissen numerischer Simulationen mit globalen oder regionalen Klimamodellen. Eine der entscheidenden Unsicherheiten bestehender Modelle liegt in dem noch unzureichenden Verständnis von Wechselwirkungsprozessen zwischen der Atmosphäre und Landoberflächen und dem daraus folgenden Fehlen entsprechender Parametrisierungen. Um das Problem einer unsicheren Modell-Parametrisierung aufzugreifen und zum Beispiel subskalige Heterogenität in einer Art und Weise zu beschreiben, dass sie für Modelle nutzbar wird, werden für die Bestimmung und Evaluierung von Modell-Parametrisierungsansätzen so viele Datensätze wie möglich benötigt. Die Arbeit trägt zu diesem Thema durch die Verwendung verschiedener Datensätze unterschiedlicher Plattformen bei. Ziel der Studie war es, aus Satellitendaten verschiedener räumlicher und zeitlicher Auflösung sowie aus in-situ Daten die räumliche Heterogenität von Landoberflächenparametern und Energieflussdichten zu bestimmen. Die Untersuchungen wurden für zwei Zielgebiete in Deutschland durchgeführt. Für das LITFASS-Gebiet (Lindenberg Inhomogeneous Terrain - Fluxes between Atmosphere and Surface: a longterm Study) wurden Satellitendaten der Jahre 2002 und 2003 untersucht und validiert. Zusätzlich wurde im Rahmen dieser Arbeit eine NDVI-Studie (Normalisierter Differenzen Vegetations Index: Maß zur Detektierung von Vegetationflächen, deren Vitalität und Dichte) auf den Testflächen des FLUXNET Clusters um Tharandt in den Jahren 2006 und 2007 realisiert. Die Grundlage der Arbeit bildete die Bestimmung von Landoberflächeneigenschaften und daraus resultierenden Energieflüssen, auf Basis dreier optischer Sensoren (ETM+ (Enhanced Thematic Mapper), MODIS (Moderate Resolution Imaging Spectroradiometer) und AVHRR 3 (Advanced Very High Resolution Radiometer)) mit unterschiedlichen räumlichen (30 m – 1 km) und zeitlichen (1 – 16 Tage) Auflösungen. Unterschiedliche Sensorcharakteristiken, sowie die Verwendung verschiedener, zum Teil ungenauer Datensätze zur Landnutzungsklassifikation führen zu Abweichungen in den Ergebnissen der einzelnen Sensoren. Durch die Quantifizierung der Sensorunterschiede, die Anpassung der Ergebnisse der Sensoren aneinander und eine Qualitätsanalyse von verschiedenen Landnutzungsklassifikationen, wurde eine Basis für eine vergleichbare Parametrisierung der Oberflächenparameter und damit auch für die daraus berechneten Energieflüsse geschaffen. Der Schwerpunkt lag dabei auf der Bestimmung des latenten Wärmestromes (L.E) mit Hilfe des Penman-Monteith Ansatzes (P-M). Satellitendaten liefern Messwerte der spektralen Reflexion und der Oberflächentemperatur. Die P-M Gleichung erfordert weitere Oberflächenparameter wie zum Beispiel den NDVI, den Blattflächenindex (LAI), die Windgeschwindigkeit, die relative Luftfeuchte, die Vegetationshöhe oder die Rauhigkeitslänge, die jedoch aus den Satellitendaten nicht bestimmt werden können. Sie müssen indirekt aus den oben genannten Messgrößen der Satelliten oder aus in-situ Messungen abgeleitet werden. Stehen auch aus diesen Quellen keine Daten zur Verfügung, können sogenannte Standard- (Default-) Werte aus der Literatur verwendet werden. Die Qualität dieser Parameter hat einen großen Einfluss auf die Bestimmung der Strahlungs- und Energieflüsse. Sensitivitätsstudien im Rahmen der Arbeit zeigen die Bedeutung des NDVI als einen der wichtigsten Parameter in der Verdunstungsbestimmung nach P-M. Im Gegensatz dazu wurde deutlich, dass z. B. die Vegetationshöhe und die Messhöhe einen relativ kleinen Einfluss auf L.E haben, so dass für diese Parameter die Verwendung von Standardwerten gerechtfertigt ist. Aufgrund der Schlüsselrolle, welche der NDVI in der Bestimmung der Verdunstung einnimmt, wurden im Rahmen einer Feldstudie Untersuchungen des NDVI über fünf verschiedenen Landnutzungstypen (Winterweizen, Mais, Gras, Buche und Fichte) hinsichtlich seiner räumlichen Variabilität und Sensitivität, unternommen. Dabei wurden verschiedene Bestimmungsmethoden getestet, in welchen der NDVI nicht nur aus Satellitendaten (spektral), sondern auch aus in-situ Turmmessungen (breitbandig) und Spekrometermessungen (spektral) ermittelt wird. Die besten Übereinstimmungen der Ergebnisse wurden dabei für Winterweizen und Gras für das Jahr 2006 gefunden. Für diese Landnutzungstypen betrugen die Maximaldifferenzen aus den drei Methoden jeweils 10 beziehungsweise 15 %. Deutlichere Differenzen ließen sich für die Forstflächen verzeichnen. Die Korrelation zwischen Satelliten- und Spektrometermessung betrug r=0.67. Für Satelliten- und Turmmessungen ergab sich ein Wert von r=0.5. Basierend auf den beschriebenen Vorarbeiten wurde die räumliche Variabilität von Landoberflächenparametern und Flüssen untersucht. Die unterschiedlichen räumlichen Auflösungen der Satelliten können genutzt werden, um zum einen die subskalige Heterogenität zu beschreiben, aber auch, um den Effekt räumlicher Mittelungsverfahren zu testen. Dafür wurden Parameter und Energieflüsse in Abhängigkeit der Landnutzungsklasse untersucht, um typische Verteilungsmuster dieser Größen zu finden. Die Verwendung der Verteilungsmuster (in Form von Wahrscheinlichkeitsdichteverteilungen – PDFs), die für die Albedo und den NDVI aus ETM+ Daten gefunden wurden, bietet ein hohes Potential als Modellinput, um repräsentative PDFs der Energieflüsse auf gröberen Skalen zu erhalten. Die ersten Ergebnisse in der Verwendung der PDFs von Albedo, NDVI, relativer Luftfeuchtigkeit und Windgeschwindigkeit für die Bestimmung von L.E waren sehr ermutigend und zeigten das hohe Potential der Methode. Zusammenfassend lässt sich feststellen, dass die Methode der Ableitung von Oberflächenparametern und Energieflüssen aus Satellitendaten zuverlässige Daten auf verschiedenen zeitlichen und räumlichen Skalen liefert. Die Daten sind für eine detaillierte Analyse der räumlichen Variabilität der Landschaft und für die Beschreibung der subskaligen Heterogenität, wie sie oft in Modellanwendungen benötigt wird, geeignet. Ihre Nutzbarkeit als Inputparameter in Modellen auf verschiedenen Skalen ist das zweite wichtige Ergebnis der Arbeit. Aus Satellitendaten abgeleitete Vegetationsparameter wie der LAI oder die Pflanzenbedeckung liefern realistische Ergebnisse, die zum Beispiel als Modellinput in das Lokalmodell des Deutschen Wetterdienstes implementiert werden konnten und die Modellergebnisse von L.E signifikant verbessert haben. Aber auch thermale Parameter, wie beispielsweise die Oberflächentemperatur aus ETM+ Daten in 30 m Auflösung, wurden als Eingabeparameter eines Soil-Vegetation-Atmosphere-Transfer-Modells (SVAT) verwendet. Dadurch erhält man realistischere Ergebnisse für L.E, die hochaufgelöste Flächeninformationen bieten