Solar Photovoltaic and Thermal Energy Systems: Current Technology and Future Trends

Solar systems have become very competitive solutions for residential, commercial, and industrial applications for both standalone and grid connected operations. This paper presents an overview of the current status and future perspectives of solar energy (mainly photovoltaic) technology and the required conversion systems. The focus in the paper is put on the current technology, installations challenges, and future expectations. Various aspects related to the global solar market, the photovoltaic (PV) modules cost and technology, and the power electronics converter systems are addressed. Research trends and recommendations for each of the PV system sectors are also discussed.Junta de Andalucía P11-TIC-7070Ministerio de Ciencia e Innovación TEC2016-78430-

Reliability analysis of single-phase photovoltaic inverters with reactive power support

Reactive power support is expected to be an emerging ancillary requirement for single-phase photovoltaic (PV) inverters. This work assesses related reliability issues and focuses on the second stage or inversion process in PV inverters. Three PV inverter topologies are analyzed and their reliability is determined on a component-by-component level. Limiting operating points are considered for each of these topologies. The capacitor in the dc link, the MOSFETs in the inverting bridge, and the output filter are the components affected. Studies show that varying power-factor operation with a constant real power output increases the energy storage requirement as well as the capacitance required in the dc link in order to produce the double-frequency power ripple. The overall current rating of the MOSFETs and output filter must also be sized to accommodate the current for the apparent power output. Modeling of the inverter verifies the conditions for each of the components under varying reactive power support commands. It is shown that the production of reactive power can significantly increase the capacitance requirement, but the limiting reliability issue comes from the increased output current rating of the MOSFETs

Direct usage of photovoltaic solar panels to supply a freezer motor with variable DC input voltage

In this paper, a single-phase photovoltaic (PV) inverter fed by a boost converter to supply a freezer motor with variable DC input is investigated. The proposed circuit has two stages. Firstly, the DC output of the PV panel that varies between 150 and 300 V will be applied to the boost converter. The boost converter will boost the input voltage to a fixed 300 V DC. Next, this voltage is supplied to the single-phase full-bridge inverter to obtain 230 V AC. In the end, The output of the inverter will feed a freezer motor. The PV panels can be stand-alone or grid-connected. The grid-connected PV is divided into two categories, such as with a transformer and without a transformer, a transformer type has galvanic isolation resulting in increasing the security and also provides no further DC current toward the grid, but it is expensive, heavy and bulky. The transformerless type holds high efficiency and it is cheaper, but it suffers from leakage current between PV and the grid. This paper proposes a stand-alone direct use of PV to supply a freezer; therefore, no grid connection will result in no leakage current between the PV and Grid. The proposed circuit has some features such as no filtering circuit at the output of the inverter, no battery in the system, DC-link instead of AC link that reduces no-loads, having a higher efficiency, and holding enough energy in the DC-link capacitor to get the motor started. The circuit uses no transformers, thus, it is cheaper and has a smaller size. In addition, the system does not require a complex pulse width modulation (PWM) technique, because the motor can operate with a pulsed waveform. The control strategy uses the PWM signal with the desired timing. With this type of square wave, the harmonics (5th and 7th) of the voltage are reduced. The experimental and simulation results are presented to verify the feasibility of the proposed strategy

Multilevel Converters: An Enabling Technology for High-Power Applications

| Multilevel converters are considered today as the state-of-the-art power-conversion systems for high-power and power-quality demanding applications. This paper presents a tutorial on this technology, covering the operating principle and the different power circuit topologies, modulation methods, technical issues and industry applications. Special attention is given to established technology already found in industry with more in-depth and self-contained information, while recent advances and state-of-the-art contributions are addressed with useful references. This paper serves as an introduction to the subject for the not-familiarized reader, as well as an update or reference for academics and practicing engineers working in the field of industrial and power electronics.Ministerio de Ciencia y Tecnología DPI2001-3089Ministerio de Eduación y Ciencia d TEC2006-0386

Short-term performance variations of different photovoltaic system technologies under the humid subtropical climate of Kanpur in India

The study discusses the short-term performance variations of grid-connected photovoltaic (PV) systems installed in Kanpur, India. The analysis presents a holistic view of the performance variations of three PV array technologies [multi-crystalline (multi-Si), copper indium gallium diselenide and amorphous silicon] and two inverter types (high-frequency transformer and low-frequency transformer). The analysis considers the DC–AC conversion efficiency of the inverter, system performance through performance ratio (PR) calculations, energy variations between fixed and tracking systems and the comparison between calculated and simulated data for the examined period. The energy output difference between the tracking and fixed systems of the same PV technology show that these are dependent on differences in temperature coefficient, shading and other system related issues. The PR analysis shows the effect of temperature on the multi-Si system. The difference between the simulated and measured values of the systems was mostly attributed to the irradiance differences. Regarding the inverter evaluation, the results showed that both inverter types underperformed in terms of the conversion efficiency compared with nameplate values

Financial Analysis of a Grid-connected Photovoltaic System in South Florida

In this paper the performance and financial analysis of a grid-connected photovoltaic system installed at Florida Atlantic University (FAU) is evaluated. The power plant has the capacity of 14.8 kW and has been under operation since August 2014. This solar PV system is composed of two 7.4 kW sub-arrays, one fixed and one with single axis tracking. First, an overview of the system followed by local weather characteristics in Boca Raton, Florida is presented. In addition, monthly averaged daily solar radiation in Boca Raton as well as system AC are calculated utilizing the PVwatts simulation calculator. Inputs such as module and inverter specifications are applied to the System Advisor Model (SAM) to design and optimize the system. Finally, the estimated local load demand as well as simulation results are extracted and analyzed.Comment: 6 Pages, IEEE PVSC 2017 Conference, Washington D.