Advanced Knowledge Application in Practice

The integration and interdependency of the world economy leads towards the creation of a global market that offers more opportunities, but is also more complex and competitive than ever before. Therefore widespread research activity is necessary if one is to remain successful on the market. This book is the result of research and development activities from a number of researchers worldwide, covering concrete fields of research

Integrasjon av et minimalistisk sett av sensorer for kartlegging og lokalisering av landbruksroboter

Robots have recently become ubiquitous in many aspects of daily life. For in-house applications there is vacuuming, mopping and lawn-mowing robots. Swarms of robots have been used in Amazon warehouses for several years. Autonomous driving cars, despite being set back by several safety issues, are undeniably becoming the standard of the automobile industry. Not just being useful for commercial applications, robots can perform various tasks, such as inspecting hazardous sites, taking part in search-and-rescue missions. Regardless of end-user applications, autonomy plays a crucial role in modern robots. The essential capabilities required for autonomous operations are mapping, localization and navigation. The goal of this thesis is to develop a new approach to solve the problems of mapping, localization, and navigation for autonomous robots in agriculture. This type of environment poses some unique challenges such as repetitive patterns, large-scale sparse features environments, in comparison to other scenarios such as urban/cities, where the abundance of good features such as pavements, buildings, road lanes, traffic signs, etc., exists. In outdoor agricultural environments, a robot can rely on a Global Navigation Satellite System (GNSS) to determine its whereabouts. It is often limited to the robot's activities to accessible GNSS signal areas. It would fail for indoor environments. In this case, different types of exteroceptive sensors such as (RGB, Depth, Thermal) cameras, laser scanner, Light Detection and Ranging (LiDAR) and proprioceptive sensors such as Inertial Measurement Unit (IMU), wheel-encoders can be fused to better estimate the robot's states. Generic approaches of combining several different sensors often yield superior estimation results but they are not always optimal in terms of cost-effectiveness, high modularity, reusability, and interchangeability. For agricultural robots, it is equally important for being robust for long term operations as well as being cost-effective for mass production. We tackle this challenge by exploring and selectively using a handful of sensors such as RGB-D cameras, LiDAR and IMU for representative agricultural environments. The sensor fusion algorithms provide high precision and robustness for mapping and localization while at the same time assuring cost-effectiveness by employing only the necessary sensors for a task at hand. In this thesis, we extend the LiDAR mapping and localization methods for normal urban/city scenarios to cope with the agricultural environments where the presence of slopes, vegetation, trees render the traditional approaches to fail. Our mapping method substantially reduces the memory footprint for map storing, which is important for large-scale farms. We show how to handle the localization problem in dynamic growing strawberry polytunnels by using only a stereo visual-inertial (VI) and depth sensor to extract and track only invariant features. This eliminates the need for remapping to deal with dynamic scenes. Also, for a demonstration of the minimalistic requirement for autonomous agricultural robots, we show the ability to autonomously traverse between rows in a difficult environment of zigzag-liked polytunnel using only a laser scanner. Furthermore, we present an autonomous navigation capability by using only a camera without explicitly performing mapping or localization. Finally, our mapping and localization methods are generic and platform-agnostic, which can be applied to different types of agricultural robots. All contributions presented in this thesis have been tested and validated on real robots in real agricultural environments. All approaches have been published or submitted in peer-reviewed conference papers and journal articles.Roboter har nylig blitt standard i mange deler av hverdagen. I hjemmet har vi støvsuger-, vaske- og gressklippende roboter. Svermer med roboter har blitt brukt av Amazons varehus i mange år. Autonome selvkjørende biler, til tross for å ha vært satt tilbake av sikkerhetshensyn, er udiskutabelt på vei til å bli standarden innen bilbransjen. Roboter har mer nytte enn rent kommersielt bruk. Roboter kan utføre forskjellige oppgaver, som å inspisere farlige områder og delta i leteoppdrag. Uansett hva sluttbrukeren velger å gjøre, spiller autonomi en viktig rolle i moderne roboter. De essensielle egenskapene for autonome operasjoner i landbruket er kartlegging, lokalisering og navigering. Denne type miljø gir spesielle utfordringer som repetitive mønstre og storskala miljø med få landskapsdetaljer, sammenlignet med andre steder, som urbane-/bymiljø, hvor det finnes mange landskapsdetaljer som fortau, bygninger, trafikkfelt, trafikkskilt, etc. I utendørs jordbruksmiljø kan en robot bruke Global Navigation Satellite System (GNSS) til å navigere sine omgivelser. Dette begrenser robotens aktiviteter til områder med tilgjengelig GNSS signaler. Dette vil ikke fungere i miljøer innendørs. I ett slikt tilfelle vil reseptorer mot det eksterne miljø som (RGB-, dybde-, temperatur-) kameraer, laserskannere, «Light detection and Ranging» (LiDAR) og propriopsjonære detektorer som treghetssensorer (IMU) og hjulenkodere kunne brukes sammen for å bedre kunne estimere robotens tilstand. Generisk kombinering av forskjellige sensorer fører til overlegne estimeringsresultater, men er ofte suboptimale med hensyn på kostnadseffektivitet, moduleringingsgrad og utbyttbarhet. For landbruksroboter så er det like viktig med robusthet for lang tids bruk som kostnadseffektivitet for masseproduksjon. Vi taklet denne utfordringen med å utforske og selektivt velge en håndfull sensorer som RGB-D kameraer, LiDAR og IMU for representative landbruksmiljø. Algoritmen som kombinerer sensorsignalene gir en høy presisjonsgrad og robusthet for kartlegging og lokalisering, og gir samtidig kostnadseffektivitet med å bare bruke de nødvendige sensorene for oppgaven som skal utføres. I denne avhandlingen utvider vi en LiDAR kartlegging og lokaliseringsmetode normalt brukt i urbane/bymiljø til å takle landbruksmiljø, hvor hellinger, vegetasjon og trær gjør at tradisjonelle metoder mislykkes. Vår metode reduserer signifikant lagringsbehovet for kartlagring, noe som er viktig for storskala gårder. Vi viser hvordan lokaliseringsproblemet i dynamisk voksende jordbær-polytuneller kan løses ved å bruke en stereo visuel inertiel (VI) og en dybdesensor for å ekstrahere statiske objekter. Dette eliminerer behovet å kartlegge på nytt for å klare dynamiske scener. I tillegg demonstrerer vi de minimalistiske kravene for autonome jordbruksroboter. Vi viser robotens evne til å bevege seg autonomt mellom rader i ett vanskelig miljø med polytuneller i sikksakk-mønstre ved bruk av kun en laserskanner. Videre presenterer vi en autonom navigeringsevne ved bruk av kun ett kamera uten å eksplisitt kartlegge eller lokalisere. Til slutt viser vi at kartleggings- og lokaliseringsmetodene er generiske og platform-agnostiske, noe som kan brukes med flere typer jordbruksroboter. Alle bidrag presentert i denne avhandlingen har blitt testet og validert med ekte roboter i ekte landbruksmiljø. Alle forsøk har blitt publisert eller sendt til fagfellevurderte konferansepapirer og journalartikler

Robots in Agriculture: State of Art and Practical Experiences

The presence of robots in agriculture has grown significantly in recent years, overcoming some of the challenges and complications of this field. This chapter aims to collect a complete and recent state of the art about the application of robots in agriculture. The work addresses this topic from two perspectives. On the one hand, it involves the disciplines that lead the automation of agriculture, such as precision agriculture and greenhouse farming, and collects the proposals for automatizing tasks like planting and harvesting, environmental monitoring and crop inspection and treatment. On the other hand, it compiles and analyses the robots that are proposed to accomplish these tasks: e.g. manipulators, ground vehicles and aerial robots. Additionally, the chapter reports with more detail some practical experiences about the application of robot teams to crop inspection and treatment in outdoor agriculture, as well as to environmental monitoring in greenhouse farming

Aerospace Medicine and Biology: A continuing bibliography with indexes, supplement 212

A bibliography listing 146 reports, articles, and other documents introduced into the NASA scientific and technical information system is presented. The subject coverage concentrates on the biological, psychological, and environmental factors involved in atmospheric and interplanetary flight. Related topics such as sanitary problems, pharmacology, toxicology, safety and survival, life support systems, and exobiology are also given attention

Task-oriented viewpoint planning for free-form objects

A thesis submitted to the Universitat Politècnica de Catalunya to obtain the degree of Doctor of Philosophy. Doctoral programme: Automatic Control, Robotics and Computer Vision. This thesis was completed at: Institut de Robòtica i Informàtica Industrial, CSIC-UPC.[EN]: This thesis deals with active sensing and its use in real exploration tasks under both scene ambiguities and measurement uncertainties. While object modeling is the implicit objective of most of active sensing algorithms, in this work we have explored new strategies to deal with more generic and more complex tasks. Active sensing requires the ability of moving the perceptual system to gather new information. Our approach uses a robot manipulator with a 3D Time-of-Flight (ToF) camera attached to the end-effector. For a complex task, we have focused our attention on plant phenotyping. Plants are complex objects, with leaves that change their position and size along time. Valid viewpoints for a certain plant are hardly valid for a different one, even belonging to the same species. Some instruments, such as chlorophyll meters or disk sampling tools, require being precisely positioned over a particular location of the leaf. Therefore, their use requires the modeling of specific regions of interest of the plant, including also the free space needed for avoiding obstacles and approaching the leaf with tool. It is easy to observe that predefined camera trajectories are not valid here, and that usually with one single view it is very difficult to acquire all the required information. The overall objective of this thesis is to solve complex active sensing tasks by embedding their exploratory goal into a pre-estimated geometrical model, using information-gain as the fundamental guideline for the reward function. The main contributions can be divided in two groups: first, the evaluation of ToF cameras and their calibration to assess the uncertainty of the measurements (presented in Part I); and second, the proposal of a framework capable of embedding the task, modeled as free and occupied space, and that takes into account the modeled sensor's uncertainty to improve the action selection algorithm (presented in Part II). This thesishas given rise to 14 publications, including 5 indexed journals, and its results have been used in the GARNICS European project. The complete framework is based on the Next-Best-View methodology and it can be summarized in the following main steps. First, an initial view of the object (e.g., a plant) is acquired. From this initial view and given a set of candidate viewpoints, the expected gain obtained by moving the robot and acquiring the next image is computed. This computation takes into account the uncertainty from all the different pixels of the sensor, the expected information based on a predefined task model, and the possible occlusions. Once the most promising view is selected, the robot moves, takes a new image, integrates this information intothe model, and evaluates again the set of remaining views. Finally, the task terminates when enough information is gathered. In our examples, this process enables the robot to perform a measurement on top of a leaf. The key ingredient is to model the complexity of the task in a layered representation of free-occupied occupancy grid maps. This allows to naturally encode the requirements of the task, to maintain and update the belief state with the measurements performed, to simulate and compute the expected gains of all potential viewpoints, and to encode the termination condition. During this work the technology of ToF cameras has incredibly evolved. Nowadays it is very popular and ToF cameras are already embedded in some consumer devices. Although the quality of the measurements has been considerably improved, it is still not uniform in the sensor. We believe, as it has been demonstrated in various experiments in this work, that a careful modeling of the sensor's uncertainty is highly beneficial and helps to design better decision systems. In our case, it enables a more realistic computation of the information gain measure, and consequently, a better selection criterion.[CA]: Aquesta tesi aborda el tema de la percepció activa i el seu ús en tasques d'exploració en entorns reals tot considerant la ambigüitat en l'escena i la incertesa del sistema de percepció. Al contrari de la majoria d'algoritmes de percepció activa, on el modelatge d'objectes sol ser l'objectiu implícit, en aquesta tesi hem explorat noves estratègies per poder tractar tasques genèriques i de major complexitat. Tot sistema de percepció activa requereix un aparell sensorial amb la capacitat de variar els seus paràmetres de forma controlada, per poder, d'aquesta manera, recopilar nova informació per resoldre una tasca determinada. En tasques d'exploració, la posició i orientació del sensor són paràmetres claus per resoldre la tasca. En el nostre estudi hem fet ús d'un robot manipulador com a sistema de posicionament i d'una càmera de profunditat de temps de vol (ToF), adherida al seu efector final, com a sistema de percepció. Com a tasca final, ens hem concentrat en l'adquisició de mesures sobre fulles dins de l'àmbit del fenotipatge de les plantes. Les plantes son objectes molt complexos, amb fulles que canvien de textura, posició i mida al llarg del temps. Això comporta diverses dificultats. Per una banda, abans de dur a terme una mesura sobre un fulla s'ha d'explorar l'entorn i trobar una regió que ho permeti. A més a més, aquells punts de vista que han estat adequats per una determinada planta difícilment ho seran per una altra, tot i sent les dues de la mateixa espècie. Per un altra banda, en el moment de la mesura, certs instruments, tals com els mesuradors de clorofil·la o les eines d'extracció de mostres, requereixen ser posicionats amb molta precisió. És necessari, doncs, disposar d'un model detallat d'aquestes regions d'interès, i que inclogui no només l'espai ocupat sinó també el lliure. Gràcies a la modelització de l'espai lliure es pot dur a terme una bona evitació d'obstacles i un bon càlcul de la trajectòria d'aproximació de l'eina a la fulla. En aquest context, és fàcil veure que, en general, amb un sol punt de vistano n'hi haprou per adquirir tota la informació necessària per prendre una mesura, i que l'ús de trajectòries predeterminades no garanteixen l'èxit. L'objectiu general d'aquesta tesi és resoldre tasques complexes de percepció activa mitjançant la codificació del seu objectiu d'exploració en un model geomètric prèviament estimat, fent servir el guany d'informació com a guia fonamental dins de la funció de cost. Les principals contribucions d'aquesta tesi es poden dividir en dos grups: primer, l'avaluació de les càmeres ToF i el seu calibratge per poder avaluar la incertesa de les seves mesures (presentat en la Part I); i en segon lloc, la proposta d'un sistema capaç de codificar la tasca mitjançant el modelatge de l'espai lliure i ocupat, i que té en compte la incertesa del sensor per millorar la selecció de les accions (presentat en la Part II). Aquesta tesi ha donat lloc a 14 publicacions, incloent 5 en revistes indexades, i els resultats obtinguts s'han fet servir en el projecte Europeu GARNICS. La funcionalitat del sistema complet està basada en els mètodes Next-Best-View (següent-millor-vista) i es pot desglossar en els següents passos principals. En primer lloc, s'obté una vista inicial de l'objecte (p. ex., una planta). A partir d'aquesta vista inicial i d'un conjunt de vistes candidates, s'estima, per cada una d'elles, el guany d'informació resultant, tant de moure la càmera com d'obtenir una nova mesura. És rellevant dir que aquest càlcul té en compte la incertesa de cada un dels píxels del sensor, l'estimació de la informació basada en el model de la tasca preestablerta i les possibles oclusions. Un cop seleccionada la vista més prometedora, el robot es mou a la nova posició, pren una nova imatge, integra aquesta informació en el model i torna a avaluar, un altre cop, el conjunt de punts de vista restants. Per últim, la tasca acaba en el moment que es recopila suficient informació.This work has been partially supported by a JAE fellowship of the Spanish Scientific Research Council (CSIC), the Spanish Ministry of Science and Innovation, the Catalan Research Commission and the European Commission under the research projects: DPI2008-06022: PAU: Percepción y acción ante incertidumbre. DPI2011-27510: PAU+: Perception and Action in Robotics Problems with Large State Spaces. 201350E102: MANIPlus: Manipulación robotizada de objetos deformables. 2009-SGR-155: SGR ROBÒTICA: Grup de recerca consolidat - Grup de Robòtica. FP6-2004-IST-4-27657: EU PACO PLUS project. FP7-ICT-2009-4-247947: GARNICS: Gardening with a cognitive system. FP7-ICT-2009-6-269959: IntellAct: Intelligent observation and execution of Actions and manipulations.Peer Reviewe

Heterogeneous multi-robot system for mapping environmental variables of greenhouses

The productivity of greenhouses highly depends on the environmental conditions of crops, such as temperature and humidity. The control and monitoring might need large sensor networks, and as a consequence, mobile sensory systems might be a more suitable solution. This paper describes the application of a heterogeneous robot team to monitor environmental variables of greenhouses. The multi-robot system includes both ground and aerial vehicles, looking to provide flexibility and improve performance. The multi-robot sensory system measures the temperature, humidity, luminosity and carbon dioxide concentration in the ground and at different heights. Nevertheless, these measurements can be complemented with other ones (e.g., the concentration of various gases or images of crops) without a considerable effort. Additionally, this work addresses some relevant challenges of multi-robot sensory systems, such as the mission planning and task allocation, the guidance, navigation and control of robots in greenhouses and the coordination among ground and aerial vehicles. This work has an eminently practical approach, and therefore, the system has been extensively tested both in simulations and field experiments.The research leading to these results has received funding from the RoboCity2030-III-CM project (Robótica aplicada a la mejora de la calidad de vida de los ciudadanos. fase III; S2013/MIT-2748), funded by Programas de Actividades I+ D en la Comunidad de Madrid and co-funded by Structural Funds of the EU, and from the DPI2014-56985-Rproject (Protección robotizada de infraestructuras críticas) funded by the Ministerio de Economía y Competitividad of Gobierno de España. This work is framed on the SAVIER (Situational Awareness Virtual EnviRonment) Project, which is both supported and funded by Airbus Defence & Space. The experiments were performed in an educational greenhouse of the E.T.S.I.Agrónomos of Technical University of Madrid.Peer Reviewe