Vehicle to Vehicle Charging (V2V) Bases on Wireless Power Transfer Technology

The slow development of energy storage technology combined with a limited number of plug-in charging stations negatively affects people's desire to purchase pure battery electric vehicles. A new wireless vehicle-to-vehicle charging technology structure is proposed, which can function with plug-in electric vehicles or operate independently. With a limited number of charging stations this technology can be used to increase charging opportunities through vehicle-to-vehicle (V2V) charging. V2V charging requires a number of technical challenges to be overcome, including the angular offset of the wireless power transfer resonant coils. The mutual inductance between two resonant coils is a key parameter for high power and efficient transfer of power. This paper presents the theory of angular offset multi-turn coil design

Sensitivity Analysis of a Bidirectional Wireless Charger for EV

Bidirectional chargers are required to fully integrate Electric Vehicle (EV) into the smart grids. Additionally, wireless chargers ease the charge/discharge process of the EV batteries so that they are becoming more popular to fulfill a V2G scenario. When considering the load of wireless chargers, it is a requirement to know the real output power that these systems offer. The designed output power may differ from the real one as components suffer from tolerance. This paper defines six sensitivity factors to model the severity of the effects of tolerance into the output power. To do so, an electric circuit analysis is used and a mathematical formulation is derived. The six sensitivity factors are computed for a laboratory prototype.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

Power Factor Corrector Design applied to an 85-kHz Wireless Charger

Wireless charging technology extends the battery autonomy by allowing more flexible and practical ways of recharging it even when the electric vehicle is on move. The frequency conversion, which is required to generate a kHz-ranged magnetic field, also leads to considerable harmonics. As a result, the power factor and the corresponding efficiency decrement. This paper proposes a Power Factor Corrector which overcomes this drawback. The most relevant feature of the designed Power Factor Corrector is that it does not need any electrical signal from the secondary side to adjust its operation properly. The simulation results show the ability of the proposed scheme to increment the system efficiency for different State-Of-Charge in the Battery.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

Micro air vehicles energy transportation for a wireless power transfer system

The aim of this work is to demonstrate the feasibility use of an Micro air vehicles (MAV) in order to power wirelessly an electric system, for example, a sensor network, using low-cost and open-source elements. To achieve this objective, an inductive system has been modelled and validated to power wirelessly a sensor node using a Crazyflie 2.0 as MAV. The design of the inductive system must be small and light enough to fulfil the requirements of the Crazyflie. An inductive model based on two resonant coils is presented. Several coils are defined to be tested using the most suitable resonant configuration. Measurements are performed to validate the model and to select the most suitable coil. While attempting to minimize the weight at transmitter’s side, on the receiver side it is intended to efficiently acquire and manage the power obtained from the transmitter. In order to prove its feasibility, a temperature sensor node is used as demonstrator. The experiment results show successfully energy transportation by MAV, and wireless power transfer for the resonant configuration, being able to completely charge the node battery and to power the temperature sensor.Peer ReviewedPostprint (published version

Bi-directional coordination of plug-in electric vehicles with economic model predictive control

© 2017 by the authors. Licensee MDPI, Basel, Switzerland. The emergence of plug-in electric vehicles (PEVs) is unveiling new opportunities to de-carbonise the vehicle parcs and promote sustainability in different parts of the globe. As battery technologies and PEV efficiency continue to improve, the use of electric cars as distributed energy resources is fast becoming a reality. While the distribution network operators (DNOs) strive to ensure grid balancing and reliability, the PEV owners primarily aim at maximising their economic benefits. However, given that the PEV batteries have limited capacities and the distribution network is constrained, smart techniques are required to coordinate the charging/discharging of the PEVs. Using the economic model predictive control (EMPC) technique, this paper proposes a decentralised optimisation algorithm for PEVs during the grid-To-vehicle (G2V) and vehicle-To-grid (V2G) operations. To capture the operational dynamics of the batteries, it considers the state-of-charge (SoC) at a given time as a discrete state space and investigates PEVs performance in V2G and G2V operations. In particular, this study exploits the variability in the energy tariff across different periods of the day to schedule V2G/G2V cycles using real data from the university's PEV infrastructure. The results show that by charging/discharging the vehicles during optimal time partitions, prosumers can take advantage of the price elasticity of supply to achieve net savings of about 63%