Water Pipeline Leakage Detection Based on Machine Learning and Wireless Sensor Networks

The detection of water pipeline leakage is important to ensure that water supply networks can operate safely and conserve water resources. To address the lack of intelligent and the low efficiency of conventional leakage detection methods, this paper designs a leakage detection method based on machine learning and wireless sensor networks (WSNs). The system employs wireless sensors installed on pipelines to collect data and utilizes the 4G network to perform remote data transmission. A leakage triggered networking method is proposed to reduce the wireless sensor network’s energy consumption and prolong the system life cycle effectively. To enhance the precision and intelligence of leakage detection, we propose a leakage identification method that employs the intrinsic mode function, approximate entropy, and principal component analysis to construct a signal feature set and that uses a support vector machine (SVM) as a classifier to perform leakage detection. Simulation analysis and experimental results indicate that the proposed leakage identification method can effectively identify the water pipeline leakage and has lower energy consumption than the networking methods used in conventional wireless sensor networks

Review on energy efficient opportunistic routing protocol for underwater wireless sensor networks

Currently, the Underwater Sensor Networks (UWSNs) is mainly an interesting area due to its ability to provide a technology to gather many valuable data from underwater environment such as tsunami monitoring sensor, military tactical application, environmental monitoring and many more. However, UWSNs is suffering from limited energy, high packet loss and the use of acoustic communication. In UWSNs most of the energy consumption is used during the forwarding of packet data from the source to the destination. Therefore, many researchers are eager to design energy efficient routing protocol to minimize energy consumption in UWSNs. As the opportunistic routing (OR) is the most promising method to be used in UWSNs, this paper focuses on the existing proposed energy efficient OR protocol in UWSNs. This paper reviews the existing proposed energy efficient OR protocol, classifying them into 3 categories namely sender-side-based, receiver-side-based and hybrid. Furthermore each of the protocols is reviewed in detail, and its advantages and disadvantages are discussed. Finally, we discuss potential future work research directions in UWSNs, especially for energy efficient OR protocol design

Adaptive remote visualization system with optimized network performance for large scale scientific data

This dissertation discusses algorithmic and implementation aspects of an automatically configurable remote visualization system, which optimally decomposes and adaptively maps the visualization pipeline to a wide-area network. The first node typically serves as a data server that generates or stores raw data sets and a remote client resides on the last node equipped with a display device ranging from a personal desktop to a powerwall. Intermediate nodes can be located anywhere on the network and often include workstations, clusters, or custom rendering engines. We employ a regression model-based network daemon to estimate the effective bandwidth and minimal delay of a transport path using active traffic measurement. Data processing time is predicted for various visualization algorithms using block partition and statistical technique. Based on the link measurements, node characteristics, and module properties, we strategically organize visualization pipeline modules such as filtering, geometry generation, rendering, and display into groups, and dynamically assign them to appropriate network nodes to achieve minimal total delay for post-processing or maximal frame rate for streaming applications. We propose polynomial-time algorithms using the dynamic programming method to compute the optimal solutions for the problems of pipeline decomposition and network mapping under different constraints. A parallel based remote visualization system, which comprises a logical group of autonomous nodes that cooperate to enable sharing, selection, and aggregation of various types of resources distributed over a network, is implemented and deployed at geographically distributed nodes for experimental testing. Our system is capable of handling a complete spectrum of remote visualization tasks expertly including post processing, computational steering and wireless sensor network monitoring. Visualization functionalities such as isosurface, ray casting, streamline, linear integral convolution (LIC) are supported in our system. The proposed decomposition and mapping scheme is generic and can be applied to other network-oriented computation applications whose computing components form a linear arrangement

A Survey on Efficient Routing Strategies For The Internet of Underwater Things (IoUT)

The Internet of Underwater Things (IoUT) is an emerging technology that promised to connect the underwater world to the land internet. It is enabled via the usage of the Underwater Acoustic Sensor Network (UASN). Therefore, it is affected by the challenges faced by UASNs such as the high dynamics of the underwater environment, the high transmission delays, low bandwidth, high-power consumption, and high bit error ratio. Due to these challenges, designing an efficient routing protocol for the IoUT is still a trade-off issue. In this paper, we discuss the specific challenges imposed by using UASN for enabling IoUT, we list and explain the general requirements for routing in the IoUT and we discuss how these challenges and requirements are addressed in literature routing protocols. Thus, the presented information lays a foundation for further investigations and futuristic proposals for efficient routing approaches in the IoUT

Drone’s node placement algorithm with routing protocols to enhance surveillance

Flying ad-hoc network (FANET) is characterized by key component features such as communication scheme, energy awareness, and task distribution. In this research, a surveillance space considering standard petroleum pipe was created with three drones viz: drone 1 (D1), master drone (DM), and drone 2 (D2) to survey as FANET. DM aggregate packets from D1, D2 and communicate with the static ground control station (SGCS). The starting point of the three drones and their trajectories during deployment were calculated and simulated. Selection of DM, D1, and D2 was done using battery level before take-off. Simulation results show take-off time difference which depends on the distance of each drone to the SGCS during deployment. D1 take-off first, while DM and D2 followed after 0.0704 and 0.1314 ms respectively. The position-oriented routing protocols results indicated variation of information flow within time notch due to variation in the density of the transmitted packets. Packets delivery periods are 0.00136×103 sec, 0.00110×103 sec, and 0.00246×103 sec for time notch 1, 2, and aggregating time notch respectively. From the results obtained, two algorithms were used successfully in deploying the drone