Single ICCII Sinusoidal Oscillators Employing Grounded Capacitors

Two inverting second-generation current conveyors (ICCII) based sinusoidal oscillators are presented. The first sinusoidal oscillator is composed of one ICCII, two grounded capacitors and two resistors. The oscillation condition and oscillation frequency can be orthogonally controllable. The second sinusoidal oscillator is composed of one ICCII, two grounded capacitors and three resistors. The oscillation condition and oscillation frequency can be independently controllable through different resistors

On the Systematic Synthesis of OTA-Based KHN Filters

According to the nullor-mirror descriptions of OTA, the NAM expansion method for three different types of KHN filters employing OTAs is considered. The type-A filters employing five OTAs have 32 different forms, the type-B filters employing four OTAs have 32 different forms, and the type-C filters employing three OTAs have eight different forms. At last a total of 72 circuits are received. Having used canonic number of components, the circuits are easy to be integrated and both pole frequency and Q-factor can be tuned electronically through tuning bias currents of the OTAs. The MULTISIM simulation results have been included to verify the workability of the derived circuit

Novel active function blocks and their applications in frequency filters and quadrature oscillators

Kmitočtové filtry a sinusoidní oscilátory jsou lineární elektronické obvody, které jsou používány v široké oblasti elektroniky a jsou základními stavebními bloky v analogovém zpracování signálu. V poslední dekádě pro tento účel bylo prezentováno velké množství stavebních funkčních bloků. V letech 2000 a 2006 na Ústavu telekomunikací, VUT v Brně byly definovány univerzální proudový konvejor (UCC) a univerzální napět'ový konvejor (UVC) a vyrobeny ve spolupráci s firmou AMI Semiconductor Czech, Ltd. Ovšem, stále existuje požadavek na vývoj nových aktivních prvků, které nabízejí nové výhody. Hlavní přínos práce proto spočívá v definici dalších původních aktivních stavebních bloků jako jsou differential-input buffered and transconductance amplifier (DBTA), current follower transconductance amplifier (CFTA), z-copy current-controlled current inverting transconductance amplifier (ZC-CCCITA), generalized current follower differential input transconductance amplifier (GCFDITA), voltage gain-controlled modified current-feedback operational amplifier (VGC-MCFOA), a minus-type current-controlled third-generation voltage conveyor (CC-VCIII-). Pomocí navržených aktivních stavebních bloků byly prezentovány původní zapojení fázovacích článků prvního řádu, univerzální filtry druhého řádu, ekvivalenty obvodu typu KHN, inverzní filtry, aktivní simulátory uzemněného induktoru a kvadraturní sinusoidní oscilátory pracující v proudovém, napět'ovém a smíšeném módu. Chování navržených obvodů byla ověřena simulací v prostředí SPICE a ve vybraných případech experimentálním měřením.Frequency filters and sinusoidal oscillators are linear electric circuits that are used in wide area of electronics and also are the basic building blocks in analogue signal processing. In the last decade, huge number of active building blocks (ABBs) were presented for this purpose. In 2000 and 2006, the universal current conveyor (UCC) and the universal voltage conveyor (UVC), respectively, were designed at the Department of Telecommunication, BUT, Brno, and produced in cooperation with AMI Semiconductor Czech, Ltd. There is still the need to develop new active elements that offer new advantages. The main contribution of this thesis is, therefore, the definition of other novel ABBs such as the differential-input buffered and transconductance amplifier (DBTA), the current follower transconductance amplifier (CFTA), the z-copy current-controlled current inverting transconductance amplifier (ZC-CCCITA), the generalized current follower differential input transconductance amplifier (GCFDITA), the voltage gain-controlled modified current-feedback operational amplifier (VGC-MCFOA), and the minus-type current-controlled third-generation voltage conveyor (CC-VCIII-). Using the proposed ABBs, novel structures of first-order all-pass filters, second-order universal filters, KHN-equivalent circuits, inverse filters, active grounded inductance simulators, and quadrature sinusoidal oscillators working in the current-, voltage-, or mixed-mode are presented. The behavior of the proposed circuits has been verified by SPICE simulations and in selected cases also by experimental measurements.

Supplementary Inductance Simulator Topologies Employing Single DXCCII

In this study, six grounded inductance simulator circuits are presented including additional useful features in comparison to previous dual-X current conveyor (DXCCII) based implementations. To demonstrate the performance and usefulness of the presented circuits, one of them is used to construct a fifth order Butterworth high-pass filter and a current-mode multifunction filter as application examples. Simulation results are given to confirm the theoretical analysis. The derived DXCCII and its applications are simulated using CMOS 0.35 μm technology

Electronically Tunable Current-mode High-order Ladder Low-pass Filters Based on CMOS Technology

This paper describes the design of current mode low-pass ladder filters based on CMOS technology. The filters are derived from passive RLC ladder filter prototypes using new CMOS lossy and lossless integrators. The all-pole and Elliptic approximations are used in the proposed low-pass filter realizations. The proposed two types of filter can be electronically tuned between 10kHz and 100MHz through bias current from 0.03µA to 300µA. The proposed filters use 1.5 V power supply with 3 mW power consumption at 300 µA bias current. The proposed filters are resistorless, use grounded capacitors and are suitable for further integration. The total harmonic distortion (THD) of the low-pass filters is less than 1% over the operating frequency range. PSPICE simulation results, obtained by using TSMC 0.18µm technology, confirm the presented theory

A Study of Voltage-Mode and Current-Mode Filters Using Modified Current Feedback Operational Amplifier

Abstract A Study of Voltage-Mode and Current-Mode Filters Using Modified Current Feedback Operational Amplifier Xin Cui There is a prevalent use of current-mode (CM) circuit techniques in analog integrated circuit design, in view of the fact that CM circuits offer certain advantages over voltage-mode (VM) circuits in terms of certain performance parameters such as propagation delay, dynamic range, and bandwidth. The characteristics of a CM circuit make it not so vulnerable to the current demands of IC design trends, such as continuously decreased size and lower DC supply voltages. Therefore, some active devices that could be exploited in both CM and VM circuits have drawn a lot of attention, such as the second generation current conveyor (CCII) and operational transconductance amplifier (OTA). However, a large amount of effort has been made on VM circuits due to their dominant form of signal processing in analog circuit design for the past several decades. The concept of network transposition, introduced by Bhattacharyya and Swamy as early as in 1971, is a powerful technique to convert a VM circuit to a CM one and vice-versa, with little physical circuit alteration and retaining the same performance as its voltage-mode counterpart. It is especially attractive in transforming those circuits that employ active devices which are transposes of themselves, such as OTA or CCII-. Recently, it has been shown in the literature that a new active element, the modified current feedback operational amplifier (MCFOA), is also its own transpose, and hence can be used to design both VM and CM circuits. It is also known that using the same MCFOA, four equivalent realizations are possible for synthesizing a VM filter function, and further, corresponding four CM filter realizations can be obtained utilizing transposition. However, no detailed study has been conducted with regard to the relative performance of the four equivalent VM structures or the corresponding four CM structures, particularly from the point of view of the non-idealness or the parasitic effects of MCFOA on the performance. This thesis presents a thorough study on band-pass filter (BPF) and notch filter (NF) implemented with MCFOA both in the voltage-mode and their transposed current-mode counterparts. The transfer functions of the four configurations of voltage-mode circuits, as well as that of the current-mode circuits, should be the same when the MCFOA is ideal. However, in practice, they are influenced by parasitic parameters. Accordingly, the performances of the band-pass and notch filters are influenced remarkably by the parasitic parameters of the active device, namely, MCFOA, especially the parasitic resistances for low frequency applications. These effects are studied by comparing the theoretical and SPICE simulation results of the four configurations of the voltage- and current-mode BPF and NF using non-ideal MCFOA. In addition, an improved MCFOA that reduces the effect of parasitic resistances is proposed. Performance of BPF and NF are compared among the four configurations of voltage- and current-mode circuits using the improved MCFOA. They are also compared with those using the original version of MCFOA. It is shown that the proposed MCFOA yields several improvements on the performance of both VM and CM BPFs, such as more attenuation at the low frequencies, and drastic reduction in the ω_p and Q_p errors. Based on the fact that MCFOA is composed of two CCIIs (CCII+ and CCII-), and FTFN can be realized with minor modifications of CCII-, it is natural to compare the performance of BPF using CCII- and FTFN with that using MCFOA. Thus, BPF using CCII- and FTFN and their transposed circuits are also studied. As mentioned earlier, CCII- is its own transpose. However, FTFN does not have a proposed admittance or a hybrid matrix for us to find its transpose. An attempt to find the admittance matrix of FTFN is explored in this thesis. The results show that FTFN can be used as its own transpose only under ideal conditions. Comparisons of performance of BPFs using the original MCFOA, the proposed MCFOA, and CCII-, as well as among their transposes, are presented. It is shown that BPF using the proposed MCFOA exhibits the best performance

Oscillation-based test in a CCII-based bandpass filter

Oscillation based testing (OBT) has proven to be a simple yet effective VLSI test for numerous circuit types. In this work, OBT is applied to test Second-generation Current Conveyor (CCII) based filters for the first time. Adopting a CCII-based band pass filter as a case study, it is shown that OBT can be implemented with a minimally intrusive switched feedback loop to establish the oscillator. Exhaustive fault simulation indicates 98.11% detection of possible short circuit and 100% detection of possible open circuit faults in the circuit under test, in both 0.35μm and 1.2μm CMOS technology nodes.Paper presented at the 8th Latin American Symposium on Circuits and Systems (LASCAS), Bariloche, Argentina, 20-23 February 2017.The Argentina – South Africa Research Cooperation Programme, as administered by the Ministry of Science, Technology and Productive Innovation in Argentina and the National Research Foundation in South Africa.hb201

Circuits for Analog Signal Processing Employing Unconventional Active Elements

Disertační práce se zabývá zaváděním nových struktur moderních aktivních prvků pracujících v napěťovém, proudovém a smíšeném režimu. Funkčnost a chování těchto prvků byly ověřeny prostřednictvím SPICE simulací. V této práci je zahrnuta řada simulací, které dokazují přesnost a dobré vlastnosti těchto prvků, přičemž velký důraz byl kladen na to, aby tyto prvky byly schopny pracovat při nízkém napájecím napětí, jelikož poptávka po přenosných elektronických zařízeních a implantabilních zdravotnických přístrojích stále roste. Tyto přístroje jsou napájeny bateriemi a k tomu, aby byla prodloužena jejich životnost, trend navrhování analogových obvodů směřuje k stále většímu snižování spotřeby a napájecího napětí. Hlavním přínosem této práce je návrh nových CMOS struktur: CCII (Current Conveyor Second Generation) na základě BD (Bulk Driven), FG (Floating Gate) a QFG (Quasi Floating Gate); DVCC (Differential Voltage Current Conveyor) na základě FG, transkonduktor na základě nové techniky BD_QFG (Bulk Driven_Quasi Floating Gate), CCCDBA (Current Controlled Current Differencing Buffered Amplifier) na základě GD (Gate Driven), VDBA (Voltage Differencing Buffered Amplifier) na základě GD a DBeTA (Differential_Input Buffered and External Transconductance Amplifier) na základě BD. Dále je uvedeno několik zajímavých aplikací užívajících výše jmenované prvky. Získané výsledky simulací odpovídají teoretickým předpokladům.The dissertation thesis deals with implementing new structures of modern active elements working in voltage_, current_, and mixed mode. The functionality and behavior of these elements have been verified by SPICE simulation. Sufficient numbers of simulated plots are included in this thesis to illustrate the precise and strong behavior of those elements. However, a big attention to implement active elements by utilizing LV LP (Low Voltage Low Power) techniques is given in this thesis. This attention came from the fact that growing demand of portable electronic equipments and implantable medical devices are pushing the development towards LV LP integrated circuits because of their influence on batteries lifetime. More specifically, the main contribution of this thesis is to implement new CMOS structures of: CCII (Current Conveyor Second Generation) based on BD (Bulk Driven), FG (Floating Gate) and QFG (Quasi Floating Gate); DVCC (Differential Voltage Current Conveyor) based on FG; Transconductor based on new technique of BD_QFG (Bulk Driven_Quasi Floating Gate); CCCDBA (Current Controlled Current Differencing Buffered Amplifier) based on conventional GD (Gate Driven); VDBA (Voltage Differencing Buffered Amplifier) based on GD. Moreover, defining new active element i.e. DBeTA (Differential_Input Buffered and External Transconductance Amplifier) based on BD is also one of the main contributions of this thesis. To confirm the workability and attractive properties of the proposed circuits many applications were exhibited. The given results agree well with the theoretical anticipation.

An Explicit Output Current-mode Quadrature Sinusoidal Oscillator and a Universal Filter Employing Only Grounded Passive Components - a Minimal Realisation

The use of voltage differencing current conveyor as an active device to design a current-mode oscillator along with a universal filter with only grounded passive elements is the main focus of this manuscript. This re-arranging circuit can work as a sinusoidal oscillator as well as a current-mode universal filter, by simple selection of passive switches. Both the circuits employ only two active devices and three grounded passive elements. The designed oscillator provides two distinctive current outputs with a quadrature-phase difference. It also maintains an independent condition of oscillation and frequency of oscillation. Moreover, the basic responses including low pass, high pass, and band pass are easily available from a current-mode universal filter. The low input impedance and high output impedance are amongst the noteworthy features of the current-mode derived filter. Non-ideal, parasitic, and sensitivity analysis of the designed circuits are also incorporated in the manuscript. Cadence PSPICE software simulation results are also included to justify the design idea. Experimental implementation of the described circuit has also been shown by employing special-purpose amplifier integrated circuit, i.e., OPA860

Analysis of Current Conveyor based Switched Capacitor Circuits for Application in ∆Σ Modulators

The reduction in supply voltage, loss of dynamic range and increased noise prevent the analog circuits from taking advantage of advanced technologies. Therefore the trend is to move all signal processing tasks to digital domain where advantages of technology scaling can be used. Due to this, there exists a need for data converters with large signal bandwidths, higher speeds and greater dynamic range to act as an interface between real world analog and digital signals. The Delta Sigma (∆Σ) modulator is a data converter that makes use of large sampling rates and noise shaping techniques to achieve high resolution in the band of interest. The modulator consists of analog integrators and comparators which create a modulated digital bit stream whose average represents the input value. Due to their simplicity, they are popular in narrow band receivers, medical and sensor applications. However Operational Amplifiers (Op-Amps) or Operational Transconductance Amplifiers (OTAs), which are commonly used in data converters, present a bottleneck. Due to low supply voltages, designers rely on folded cascode, multistage cascade and bulk driven topologies for their designs. Although the two stage or multistage cascade topologies offer good gain and bandwidth, they suffer from stability problems due to multiple stages and feedback requiring large compensation capacitors. Therefore other low voltage Switched-Capacitor (SC) circuit techniques were developed to overcome these problems, based on inverters, comparators and unity gain buffers. In this thesis we present an alternative approach to design of ∆Σ modulators using Second Generation Current Conveyors (CCIIs). The important feature of these modulators is the replacement of the traditional Op-Amp based SC integrators with CCII based SC integrators. The main design issues such as the effect of the non-idealities in the CCIIs are considered in the operation of SC circuits and solutions are proposed to cancel them. Design tradeoffs and guidelines for various components of the circuit are presented through analysis of existing and the proposed SC circuits. A two step adaptive calibration technique is presented which uses few additional components to measure the integrator input output characteristic and linearize it for providing optimum performance over a wide range of sampling frequencies while maintaining low power and area. The presented CCII integrator and calibration circuit are used in the design of a 4th order (2-2 cascade) ∆Σ modulator which has been fabricated in UMC 90nm/1V technology through Europractice. Experimental values for Signal to Noise+Distortion Ratio (SNDR), Dynamic Range (DR) and Figure Of Merit (FOM) show that the modulator can compete with state of art reconfigurable Discrete-Time (DT) architectures while using lower gain stages and less design complexity