Testability Analysis of Synchronous Sequential Circuits Based On Structural Data

Bounds on test sequence length can be used as a testability measure. We give a procedure to compute the upper bound on test sequence length for an arbitrary sequential circuit. We prove that the bound is exact for a certain class of circuits. Three design rules are specified to yield circuits with lower test sequence bounds

Custom Integrated Circuits

Contains reports on twelve research projects.Analog Devices, Inc.International Business Machines, Inc.Joint Services Electronics Program (Contract DAAL03-86-K-0002)Joint Services Electronics Program (Contract DAAL03-89-C-0001)U.S. Air Force - Office of Scientific Research (Grant AFOSR 86-0164)Rockwell International CorporationOKI Semiconductor, Inc.U.S. Navy - Office of Naval Research (Contract N00014-81-K-0742)Charles Stark Draper LaboratoryNational Science Foundation (Grant MIP 84-07285)National Science Foundation (Grant MIP 87-14969)Battelle LaboratoriesNational Science Foundation (Grant MIP 88-14612)DuPont CorporationDefense Advanced Research Projects Agency/U.S. Navy - Office of Naval Research (Contract N00014-87-K-0825)American Telephone and TelegraphDigital Equipment CorporationNational Science Foundation (Grant MIP-88-58764

Cost modelling and concurrent engineering for testable design

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.As integrated circuits and printed circuit boards increase in complexity, testing becomes a major cost factor of the design and production of the complex devices. Testability has to be considered during the design of complex electronic systems, and automatic test systems have to be used in order to facilitate the test. This fact is now widely accepted in industry. Both design for testability and the usage of automatic test systems aim at reducing the cost of production testing or, sometimes, making it possible at all. Many design for testability methods and test systems are available which can be configured into a production test strategy, in order to achieve high quality of the final product. The designer has to select from the various options for creating a test strategy, by maximising the quality and minimising the total cost for the electronic system. This thesis presents a methodology for test strategy generation which is based on consideration of the economics during the life cycle of the electronic system. This methodology is a concurrent engineering approach which takes into account all effects of a test strategy on the electronic system during its life cycle by evaluating its related cost. This objective methodology is used in an original test strategy planning advisory system, which allows for test strategy planning for VLSI circuits as well as for digital electronic systems. The cost models which are used for evaluating the economics of test strategies are described in detail and the test strategy planning system is presented. A methodology for making decisions which are based on estimated costing data is presented. Results of using the cost models and the test strategy planning system for evaluating the economics of test strategies for selected industrial designs are presented

Pseudo-functional testing: bridging the gap between manufacturing test and functional operation.

Yuan, Feng.Thesis (M.Phil.)--Chinese University of Hong Kong, 2009.Includes bibliographical references (leaves 60-65).Abstract also in Chinese.Abstract --- p.iAcknowledgement --- p.iiChapter 1 --- Introduction --- p.1Chapter 1.1 --- Manufacturing Test --- p.1Chapter 1.1.1 --- Functional Testing vs. Structural Testing --- p.2Chapter 1.1.2 --- Fault Model --- p.3Chapter 1.1.3 --- Automatic Test Pattern Generation --- p.4Chapter 1.1.4 --- Design for Testability --- p.6Chapter 1.2 --- Pseudo-Functional Manufacturing Test --- p.13Chapter 1.3 --- Thesis Motivation and Organization --- p.16Chapter 2 --- On Systematic Illegal State Identification --- p.19Chapter 2.1 --- Introduction --- p.19Chapter 2.2 --- Preliminaries and Motivation --- p.20Chapter 2.3 --- What is the Root Cause of Illegal States? --- p.22Chapter 2.4 --- Illegal State Identification Flow --- p.26Chapter 2.5 --- Justification Scheme Construction --- p.30Chapter 2.6 --- Experimental Results --- p.34Chapter 2.7 --- Conclusion --- p.35Chapter 3 --- Compression-Aware Pseudo-Functional Testing --- p.36Chapter 3.1 --- Introduction --- p.36Chapter 3.2 --- Motivation --- p.38Chapter 3.3 --- Proposed Methodology --- p.40Chapter 3.4 --- Pattern Generation in Compression-Aware Pseudo-Functional Testing --- p.42Chapter 3.4.1 --- Circuit Pre-Processing --- p.42Chapter 3.4.2 --- Pseudo-Functional Random Pattern Generation with Multi-Launch Cycles --- p.43Chapter 3.4.3 --- Compressible Test Pattern Generation for Pseudo-Functional Testing --- p.45Chapter 3.5 --- Experimental Results --- p.52Chapter 3.5.1 --- Experimental Setup --- p.52Chapter 3.5.2 --- Results and Discussion --- p.54Chapter 3.6 --- Conclusion --- p.56Chapter 4 --- Conclusion and Future Work --- p.58Bibliography --- p.6

Testability Analysis and Improvements of Register-Transfer Level Digital Circuits

The paper presents novel testability analysis method applicable to register-transfer level digital circuits. It is shown if each module stored in a design library is equipped both with information related to design and information related to testing, then more accurate testability results can be achieved. A mathematical model based on virtual port conception is utilized to describe the information and proposed testability analysis method. In order to be effective, the method is based on the idea of searching two special digraphs developed for the purpose. Experimental results gained by the method are presented and compared with results of existing methods

Testability and redundancy techniques for improved yield and reliability of CMOS VLSI circuits

The research presented in this thesis is concerned with the design of fault-tolerant integrated circuits as a contribution to the design of fault-tolerant systems. The economical manufacture of very large area ICs will necessitate the incorporation of fault-tolerance features which are routinely employed in current high density dynamic random access memories. Furthermore, the growing use of ICs in safety-critical applications and/or hostile environments in addition to the prospect of single-chip systems will mandate the use of fault-tolerance for improved reliability. A fault-tolerant IC must be able to detect and correct all possible faults that may affect its operation. The ability of a chip to detect its own faults is not only necessary for fault-tolerance, but it is also regarded as the ultimate solution to the problem of testing. Off-line periodic testing is selected for this research because it achieves better coverage of physical faults and it requires less extra hardware than on-line error detection techniques. Tests for CMOS stuck-open faults are shown to detect all other faults. Simple test sequence generation procedures for the detection of all faults are derived. The test sequences generated by these procedures produce a trivial output, thereby, greatly simplifying the task of test response analysis. A further advantage of the proposed test generation procedures is that they do not require the enumeration of faults. The implementation of built-in self-test is considered and it is shown that the hardware overhead is comparable to that associated with pseudo-random and pseudo-exhaustive techniques while achieving a much higher fault coverage through-the use of the proposed test generation procedures. The consideration of the problem of testing the test circuitry led to the conclusion that complete test coverage may be achieved if separate chips cooperate in testing each other's untested parts. An alternative approach towards complete test coverage would be to design the test circuitry so that it is as distributed as possible and so that it is tested as it performs its function. Fault correction relies on the provision of spare units and a means of reconfiguring the circuit so that the faulty units are discarded. This raises the question of what is the optimum size of a unit? A mathematical model, linking yield and reliability is therefore developed to answer such a question and also to study the effects of such parameters as the amount of redundancy, the size of the additional circuitry required for testing and reconfiguration, and the effect of periodic testing on reliability. The stringent requirement on the size of the reconfiguration logic is illustrated by the application of the model to a typical example. Another important result concerns the effect of periodic testing on reliability. It is shown that periodic off-line testing can achieve approximately the same level of reliability as on-line testing, even when the time between tests is many hundreds of hours

High level behavioural modelling of boundary scan architecture.

This project involves the development of a software tool which enables the integration of the IEEE 1149.1/JTAG Boundary Scan Test Architecture automatically into an ASIC (Application Specific Integrated Circuit) design. The tool requires the original design (the ASIC) to be described in VHDL-IEEE 1076 Hardware Description Language. The tool consists of the two major elements: i) A parsing and insertion algorithm developed and implemented in 'C'; ii) A high level model of the Boundary Scan Test Architecture implemented in 'VHDL'. The parsing and insertion algorithm is developed to deal with identifying the design Input/Output (I/O) terminals, their types and the order they appear in the ASIC design. It then attaches suitable Boundary Scan Cells to each I/O, except power and ground and inserts the high level models of the full Boundary Scan Architecture into the ASIC without altering the design core structure

Analyse de testabilité au niveau transfert de registres

Synthèse automatique et analyse de testabilité -- Les définitions de base -- Analyse de testabilité à haut niveau d'abstraction -- Analyse de testabilité et d'insertion de points de test au niveau transfert de registres -- Testability analysis and test-point insertion in RTL VHDL specifications for scan-based bist -- Implantation de l'algorithme et résultats expérimentaux

Fault-Tolerant Computing: An Overview

Coordinated Science Laboratory was formerly known as Control Systems LaboratoryNASA / NAG-1-613Semiconductor Research Corporation / 90-DP-109Joint Services Electronics Program / N00014-90-J-127