Electrostatic Discharge Protection and Latch-Up Design and Methodologies for ASIC Development

Electrostatic discharge (ESD) has been an issue in devices, circuits, and systems for electronics for many decades, as early as the 1970s, and continued to be an issue until today. In this chapter, the issue of ESD protection design and methods for Application-Specific Integrated Circuits (ASICs) will be discussed. The chapter will discuss ESD design in an ASIC environment. The discussion will address ESD design layout, design rules and practices, and the method of integration of ESD protection into the ASIC design practice. Part of the methodology is the floor planning of an ASIC design, I/O library, integration of ESD into I/O cells, power distribution, and placement of power pads, in both array and peripheral design methodologies. As part of the ASIC I/O design, guard rings and latch-up interactions will be highlighted

Cell Library Creation using ALF

The design of Integrated Circuit (ASICs and SoCs) typically relies on the availability of a library consisting of predefined components called technology cells. Silicon vendors use proprietary formats to describe technology cells and macro modules in conjunction with numerous translators to feed technology library data to Electronic Design Automation (EDA) tools. Multiple grammar formats are used to represent various aspects of the cells in the same technology library, such as behavior for simulation, timing parameters for synthesis, physical data for layout, noise parameters for signal integrity checks, etc. In addition, most of these formats are highly tool-oriented and are not grammatically consistent. In this paper we will discuss the newly adopted IEEE 1603-2003 Advanced Library Format (ALF) standard which eliminates such drawbacks. This standard defines a grammar for accurate and comprehensive modeling of technology libraries and macro modules in order to bridge the growing gap between new design rules and the analysis required for complex high-end IC implementations

Applications and Challenges of Real-time Mobile DNA Analysis

The DNA sequencing is the process of identifying the exact order of nucleotides within a given DNA molecule. The new portable and relatively inexpensive DNA sequencers, such as Oxford Nanopore MinION, have the potential to move DNA sequencing outside of laboratory, leading to faster and more accessible DNA-based diagnostics. However, portable DNA sequencing and analysis are challenging for mobile systems, owing to high data throughputs and computationally intensive processing performed in environments with unreliable connectivity and power. In this paper, we provide an analysis of the challenges that mobile systems and mobile computing must address to maximize the potential of portable DNA sequencing, and in situ DNA analysis. We explain the DNA sequencing process and highlight the main differences between traditional and portable DNA sequencing in the context of the actual and envisioned applications. We look at the identified challenges from the perspective of both algorithms and systems design, showing the need for careful co-design

Integrated support for Adaptivity and Fault-tolerance in MPSoCs

The technology improvement and the adoption of more and more complex applications in consumer electronics are forcing a rapid increase in the complexity of multiprocessor systems on chip (MPSoCs). Following this trend, MPSoCs are becoming increasingly dynamic and adaptive, for several reasons. One of these is that applications are getting intrinsically dynamic. Another reason is that the workload on emerging MPSoCs cannot be predicted because modern systems are open to new incoming applications at run-time. A third reason which calls for adaptivity is the decreasing component reliability associated with technology scaling. Components below the 32-nm node are more inclined to temporal or even permanent faults. In case of a malfunctioning system component, the rest of the system is supposed to take over its tasks. Thus, the system adaptivity goal shall influence several de- sign decisions, that have been listed below: 1) The applications should be specified such that system adaptivity can be easily supported. To this end, we consider Polyhedral Process Networks (PPNs) as model of computation to specify applications. PPNs are composed by concurrent and autonomous processes that communicate between each other using bounded FIFO channels. Moreover, in PPNs the control is completely distributed, as well as the memories. This represents a good match with the emerging MPSoC architectures, in which processing elements and memories are usually distributed. Most importantly, the simple operational semantics of PPNs allows for an easy adoption of system adaptivity mechanisms. 2) The hardware platform should guarantee the flexibility that adaptivity mechanisms require. Networks-on-Chip (NoCs) are emerging communication infrastructures for MPSoCs that, among many other advantages, allow for system adaptivity. This is because NoCs are generic, since the same platformcan be used to run different applications, or to run the same application with different mapping of processes. However, there is a mismatch between the generic structure of the NoCs and the semantics of the PPN model. Therefore, in this thesis we investigate and propose several communication approaches to overcome this mismatch. 3) The system must be able to change the process mapping at run-time, using process migration. To this end, a process migration mechanism has been proposed and evaluated. This mechanism takes into account specific requirements of the embedded domain such as predictability and efficiency. To face the problem of graceful degradation of the system, we enriched the MADNESS NoC platform by adding fault tolerance support at both software and hardware level. The proposed process migration mechanism can be exploited to cope with permanent faults by migrating the processes running on the faulty processing element. A fast heuristic is used to determine the new mapping of the processes to tiles. The experimental results prove that the overhead in terms of execution time, due to the execution time of the remapping heuristic, together with the actual process migration, is almost negligible compared to the execution time of the whole application. This means that the proposed approach allows the system to change its performance metrics and to react to faults without a substantial impact on the user experience

Sustainable Trusted Computing: A Novel Approach for a Flexible and Secure Update of Cryptographic Engines on a Trusted Platform Module

Trusted computing is gaining an increasing acceptance in the industry and finding its way to cloud computing. With this penetration, the question arises whether the concept of hardwired security modules will cope with the increasing sophistication and security requirements of future IT systems and the ever expanding threats and violations. So far, embedding cryptographic hardware engines into the Trusted Platform Module (TPM) has been regarded as a security feature. However, new developments in cryptanalysis, side-channel analysis, and the emergence of novel powerful computing systems, such as quantum computers, can render this approach useless. Given that, the question arises: Do we have to throw away all TPMs and lose the data protected by them, if someday a cryptographic engine on the TPM becomes insecure? To address this question, we present a novel architecture called Sustainable Trusted Platform Module (STPM), which guarantees a secure update of the TPM cryptographic engines without compromising the system’s trustworthiness. The STPM architecture has been implemented as a proof-of-concept on top of a Xilinx Virtex-5 FPGA platform, demonstrating the test cases with an update of the fundamental hash and asymmetric engines of the TPM

Integrated support for Adaptivity and Fault-tolerance in MPSoCs

The technology improvement and the adoption of more and more complex applications in consumer electronics are forcing a rapid increase in the complexity of multiprocessor systems on chip (MPSoCs). Following this trend, MPSoCs are becoming increasingly dynamic and adaptive, for several reasons. One of these is that applications are getting intrinsically dynamic. Another reason is that the workload on emerging MPSoCs cannot be predicted because modern systems are open to new incoming applications at run-time. A third reason which calls for adaptivity is the decreasing component reliability associated with technology scaling. Components below the 32-nm node are more inclined to temporal or even permanent faults. In case of a malfunctioning system component, the rest of the system is supposed to take over its tasks. Thus, the system adaptivity goal shall influence several de- sign decisions, that have been listed below: 1) The applications should be specified such that system adaptivity can be easily supported. To this end, we consider Polyhedral Process Networks (PPNs) as model of computation to specify applications. PPNs are composed by concurrent and autonomous processes that communicate between each other using bounded FIFO channels. Moreover, in PPNs the control is completely distributed, as well as the memories. This represents a good match with the emerging MPSoC architectures, in which processing elements and memories are usually distributed. Most importantly, the simple operational semantics of PPNs allows for an easy adoption of system adaptivity mechanisms. 2) The hardware platform should guarantee the flexibility that adaptivity mechanisms require. Networks-on-Chip (NoCs) are emerging communication infrastructures for MPSoCs that, among many other advantages, allow for system adaptivity. This is because NoCs are generic, since the same platformcan be used to run different applications, or to run the same application with different mapping of processes. However, there is a mismatch between the generic structure of the NoCs and the semantics of the PPN model. Therefore, in this thesis we investigate and propose several communication approaches to overcome this mismatch. 3) The system must be able to change the process mapping at run-time, using process migration. To this end, a process migration mechanism has been proposed and evaluated. This mechanism takes into account specific requirements of the embedded domain such as predictability and efficiency. To face the problem of graceful degradation of the system, we enriched the MADNESS NoC platform by adding fault tolerance support at both software and hardware level. The proposed process migration mechanism can be exploited to cope with permanent faults by migrating the processes running on the faulty processing element. A fast heuristic is used to determine the new mapping of the processes to tiles. The experimental results prove that the overhead in terms of execution time, due to the execution time of the remapping heuristic, together with the actual process migration, is almost negligible compared to the execution time of the whole application. This means that the proposed approach allows the system to change its performance metrics and to react to faults without a substantial impact on the user experience

Adaptive Data Migration in Load-Imbalanced HPC Applications

Distributed parallel applications need to maximize and maintain computer resource utilization and be portable across different machines. Balanced execution of some applications requires more effort than others because their data distribution changes over time. Data re-distribution at runtime requires elaborate schemes that are expensive and may benefit particular applications. This dissertation discusses a solution for HPX applications to monitor application execution with APEX and use AGAS migration to adaptively redistribute data and load balance applications at runtime to improve application performance and scaling behavior. This dissertation provides evidence for the practicality of using the Active Global Address Space as is proposed by the ParalleX model and implemented in HPX. It does so by using migration for the transparent moving of objects at runtime and using the Autonomic Performance Environment for eXascale library with experiments that run on homogeneous and heterogeneous machines at Louisiana State University, CSCS Swiss National Supercomputing Centre, and National Energy Research Scientific Computing Center

Universal Reconfigurable Translator Module (URTM) Final Report

This report describes the Universal Reconfigurable Translation Module, or URTM. The URTM was developed by Sigma Space Corporation for NASA in order to translate specific serial protocols, both logically and physically. At present, the prototype configuration has targeted MIL-STD-1553B (RT and BC), IEEE 1394b (Firewire), and ECSS-E-50-12A (SpaceWire). The objectives of this program were to study the feasibility of a configurable URTM to translate serial link data as might be used in a space-flight mission and to design, develop, document, and deliver an engineering prototype model of the URTM with a path to spaceflight. By simply connecting two of the three Physical Interface Modules (PIM) on either end of the RPTM (Reconfigurable Protocol Translator Module), the URTM then self configures via a library of interface translation functions, thereby allowing the two data links to communicate seamlessly