Performance analysis and application development of hybrid WiMAX-WiFi IP video surveillance systems

Traditional Closed Circuit Television (CCTV) analogue cameras installed in buildings and other areas of security interest necessitates the use of cable lines. However, analogue systems are limited by distance; and storing analogue data requires huge space or bandwidth. Wired systems are also prone to vandalism, they cannot be installed in a hostile terrain and in heritage sites, where cabling would distort original design. Currently, there is a paradigm shift towards wireless solutions (WiMAX, Wi-Fi, 3G, 4G) to complement and in some cases replace the wired system. A wireless solution of the Fourth-Generation Surveillance System (4GSS) has been proposed in this thesis. It is a hybrid WiMAX-WiFi video surveillance system. The performance analysis of the hybrid WiMAX-WiFi is compared with the conventional WiMAX surveillance models. The video surveillance models and the algorithm that exploit the advantages of both WiMAX and Wi-Fi for scenarios of fixed and mobile wireless cameras have been proposed, simulated and compared with the mathematical/analytical models. The hybrid WiMAX-WiFi video surveillance model has been extended to include a Wireless Mesh configuration on the Wi-Fi part, to improve the scalability and reliability. A performance analysis for hybrid WiMAX-WiFi system with an appropriate Mobility model has been considered for the case of mobile cameras. A security software application for mobile smartphones that sends surveillance images to either local or remote servers has been developed. The developed software has been tested, evaluated and deployed in low bandwidth Wi-Fi wireless network environments. WiMAX is a wireless metropolitan access network technology that provides broadband services to the connected customers. Major modules and units of WiMAX include the Customer Provided Equipment (CPE), the Access Service Network (ASN) which consist one or more Base Stations (BS) and the Connectivity Service Network (CSN). Various interfaces exist between each unit and module. WiMAX is based on the IEEE 802.16 family of standards. Wi-Fi, on the other hand, is a wireless access network operating in the local area network; and it is based on the IEEE 802.11 standards

Crop Updates 2005 - Farming Systems

This session covers forty four papers from different authors: PLENARY 1. 2005 Outlook, David Stephens and Nicola Telcik, Department of Agriculture FERTILITY AND NUTRITION 2. The effect of higher nitrogen fertiliser prices on rotation and fertiliser strategies in cropping systems, Ross Kingwell, Department of Agriculture and University of Western Australia 3. Stubble management: The short and long term implications for crop nutrition and soil fertility, Wayne Pluske, Nutrient Management Systems and Bill Bowden, Department of Agriculture 4. Stubble management: The pros and cons of different methods, Bill Bowden, Department of Agriculture, Western Australia and Mike Collins, WANTFA 5. Effect of stubble burning and seasonality on microbial processes and nutrient recycling, Frances Hoyle, The University of Western Australia 6. Soil biology and crop production in Western Australian farming systems, D.V. Murphy, N. Milton, M. Osman, F.C. Hoyle, L.K Abbott, W.R. Cookson and S. Darmawanto, The University of Western Australia 7. Urea is as effective as CAN when no rain for 10 days, Bill Crabtree, Crabtree Agricultural Consulting 8. Fertiliser (N,P,S,K) and lime requirements for wheat production in the Merredin district, Geoff Anderson, Department of Agriculture and Darren Kidson, Summit Fertilizers 9. Trace element applications: Up-front verses foliar? Bill Bowden and Ross Brennan, Department of Agriculture 10. Fertcare®, Environmental Product Stewardship and Advisor Standards for thee Fertiliser Industry, Nick Drew, Fertilizer Industry Federation of Australia (FIFA) SOIL AND LAND MANAGEMENT 11. Species response to row spacing, density and nutrition, Bill Bowden, Craig Scanlan, Lisa Sherriff, Bob French and Reg Lunt, Department of Agriculture 12. Investigation into the influence of row orientation in lupin crops, Jeff Russell, Department of Agriculture and Angie Roe, Farm Focus Consultants 13. Deriving variable rate management zones for crops, Ian Maling, Silverfox Solutions and Matthew Adams, DLI 14. In a world of Precision Agriculture, weigh trailers are not passé, Jeff Russell, Department of Agriculture 15. Cover crop management to combat ryegrass resistance and improve yields, Jeff Russell, Department of Agriculture and Angie Roe, Farm Focus Consultants 16. ARGT home page, the place to find information on annual ryegrass toxicity on the web, Dr George Yan, BART Pty Ltd 17. Shallow leading tine (SLT) ripper significantly reduces draft force, improves soil tilth and allows even distribution of subsoil ameliorants, Mohammad Hamza, Glen Riethmuller and Wal Anderson, Department of Agriculture PASTURE ANS SUMMER CROP SYSTEMS 18. New annual pasture legumes for Mediteranean farming systems, Angelo Loi, Phil Nichols, Clinton Revell and David Ferris, Department of Agriculture 19. How sustainable are phase rotations with Lucerne? Phil Ward, CSIRO Plant Industry 20. Management practicalities of summer cropping, Andrea Hills and Sally-Anne Penny, Department of Agriculture 21. Rainfall zone determines the effect of summer crops on winter yields, Andrea Hills, Sally-Anne Penny and David Hall, Department of Agriculture 22. Summer crops and water use, Andrea Hills, Sally-Anne Penny and David Hall, Department of Agriculture, and Michael Robertson and Don Gaydon, CSIRO Brisbane 23. Risk analysis of sorgum cropping, Andrea Hills and Sally-Anne Penny, Department of Agriculture, and Dr Michael Robertson and Don Gaydon, CSIRO Brisbane FARMER DECISION SUPPORT AND ADOPTION 24. Variety release and End Point Royalties – a new system? Tress Walmsley, Department of Agriculture 25. Farming system analaysis using the STEP Tool, Caroline Peek and Megan Abrahams, Department of Agriculture 26. The Leakage Calculator: A simple tool for groundwater recharge assessment, Paul Raper, Department of Agriculture 27. The cost of Salinity Calculator – your tool to assessing the profitability of salinity management options, Richard O’Donnell and Trevor Lacey, Department of Agriculture 28. Climate decision support tools, Meredith Fairbanks and David Tennant, Department of Agriculture 29. Horses for courses – using the best tools to manage climate risk, Cameron Weeks, Mingenew-Irwin Group/Planfarm and Richard Quinlan, Planfarm Agronomy 30. Use of seasonal outlook for making N decisions in Merredin, Meredith Fairbanks and Alexandra Edward, Department of Agriculture 31. Forecasts and profits, Benefits or bulldust? Chris Carter and Doug Hamilton, Department of Agriculture 32. A tool to estimate fixed and variable header and tractor depreciation costs, Peter Tozer, Department of Agriculture 33. Partners in grain: ‘Putting new faces in new places’, Renaye Horne, Department of Agriculture 34. Results from the Grower group Alliance, Tracey Gianatti, Grower Group Alliance 35. Local Farmer Group Network – farming systems research opportunities through local groups, Paul Carmody, Local Farmer Group Network GREENHOUSE GAS AND CLIMATE CHANGE 36. Changing rainfall patterns in the grainbelt, Ian Foster, Department of Agriculture 37. Vulnerability of broadscale agriculture to the impacts of climate change, Michele John, CSIRO (formerly Department of Agriculture) and Ross George, Department of Agriculture 38. Impacts of climate change on wheat yield at Merredin, Imma Farré and Ian Foster, Department of Agriculture 39. Climate change, land use suitability and water security, Ian Kininmonth, Dennis van Gool and Neil Coles, Department of Agriculture 40. Nitrous oxide emissions from cropping systems, Bill Porter, Department of Agriculture, Louise Barton, University of Western Australia 41. The potential of greenhouse sinks to underwrite improved land management in Western Australia, Richard Harper and Peter Ritson, CRC for Greenhouse Accounting and Forest Products Commission, Tony Beck, Tony Beck Consulting Services, Chris Mitchell and Michael Hill, CRC for Greenhouse Accounting 42. Removing uncertainty from greenhouse emissions, Fiona Barker-Reid, Will Gates, Ken Wilson and Rob Baigent, Department of Primary Industries - Victoria and CRC for Greenhouse Accounting (CRCGA), and Ian Galbally, Mick Meyer and Ian Weeks, CSIRO Atmospheric Research and CRCGA 43. Greenhouse in Agriculture Program (GIA), Traci Griffin, CRC for Greenhouse Accounting 44. Grains Greenhouse Accounting framework, D. Rodriguez, M. Probust, M. Meyers, D. Chen, A. Bennett, W. Strong, R. Nussey, I. Galbally and M. Howden CONTACT DETAILS FOR PRINCIPAL AUTHOR

RFID Technology in Intelligent Tracking Systems in Construction Waste Logistics Using Optimisation Techniques

Construction waste disposal is an urgent issue for protecting our environment. This paper proposes a waste management system and illustrates the work process using plasterboard waste as an example, which creates a hazardous gas when land filled with household waste, and for which the recycling rate is less than 10% in the UK. The proposed system integrates RFID technology, Rule-Based Reasoning, Ant Colony optimization and knowledge technology for auditing and tracking plasterboard waste, guiding the operation staff, arranging vehicles, schedule planning, and also provides evidence to verify its disposal. It h relies on RFID equipment for collecting logistical data and uses digital imaging equipment to give further evidence; the reasoning core in the third layer is responsible for generating schedules and route plans and guidance, and the last layer delivers the result to inform users. The paper firstly introduces the current plasterboard disposal situation and addresses the logistical problem that is now the main barrier to a higher recycling rate, followed by discussion of the proposed system in terms of both system level structure and process structure. And finally, an example scenario will be given to illustrate the system’s utilization

Utilising in-vehicle information to detect traffic conditions in vehicular ad-hoc networks

In the last decade, cooperative vehicular network has been one of the most studied areas for developing the intelligent transportation systems (ITS). It is considered as an important approach to share the periodic traffic situations over vehicular ad hoc networks (VANETs) to improve efficiency and safety over the road. In addition to the uses of ITS, VANETs will contribute in service access, cooperative driving, entertainment and navigation for cars of the future. Vehicle to vehicle and vehicle to infrastructure communication are two distinct avenues that make possible efficient delivery of messages through direct wireless transmissions in traffic regions. Furthermore, promising quality of communication performance is desirable for a communication system composed mostly if roaming participants; such a system needs to be dynamic, flexible and infrastructure-less. Thus VANET architecture is a natural fit for ITS. However, there are a number of issues in exchanging traffic data over high mobility of VANET, such as broadcast storms, hidden nodes and network instability. Therefore, vehicular traffic efficiency applications have been investigated recently using VANET. This aspect of research is primarily concerned with increasing the traffic awareness over roads. In this thesis, a novel model, Efficient Traffic Conditions Detection (ETraCD) is proposed to detect the traffic conditions utilising vehicles’ characteristics and in-vehicles sensors information to evaluate traffic situations that are gathered from the nodes (vehicles) in VANET. The model revolves around the core idea to what extent we will be considering the traffic characteristics between groups of cars rather than individual cars. This does not concern the physical transmission of data but the data processing in the network. More precisely, vehicles are clustered into traffic groups based on the similarity of sensors’s data. ETraCD (a) divides the situations of vehicles into clusters, (b) designs a set of metrics to get the correlations among vehicles and (c) detects the traffic condition in certain areas. These approaches have been simulated in NS3 network simulator to investigate the performance of stability of the network, latency, and the accuracy of traffic situations detection. The proposed model applies V2V clustering paradigm for detecting traffic conditions, it has been implemented and its features investigated through simulation runs. It shows the benefit of using the vehicular sensors informations such as ABS, windscreen lights and so on based on V2V communication to provide an efficient traffic conclusion in urban environment. Experiments also show improved overall performance when compared to previous protocols

NASA Tech Briefs, July 1991

Topics include: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences

Proceedings of the Fifth International Mobile Satellite Conference 1997

Satellite-based mobile communications systems provide voice and data communications to users over a vast geographic area. The users may communicate via mobile or hand-held terminals, which may also provide access to terrestrial communications services. While previous International Mobile Satellite Conferences have concentrated on technical advances and the increasing worldwide commercial activities, this conference focuses on the next generation of mobile satellite services. The approximately 80 papers included here cover sessions in the following areas: networking and protocols; code division multiple access technologies; demand, economics and technology issues; current and planned systems; propagation; terminal technology; modulation and coding advances; spacecraft technology; advanced systems; and applications and experiments

Optimal use of computing equipment in an automated industrial inspection context

This thesis deals with automatic defect detection. The objective was to develop the techniques required by a small manufacturing business to make cost-efficient use of inspection technology. In our work on inspection techniques we discuss image acquisition and the choice between custom and general-purpose processing hardware. We examine the classes of general-purpose computer available and study popular operating systems in detail. We highlight the advantages of a hybrid system interconnected via a local area network and develop a sophisticated suite of image-processing software based on it. We quantitatively study the performance of elements of the TCP/IP networking protocol suite and comment on appropriate protocol selection for parallel distributed applications. We implement our own distributed application based on these findings. In our work on inspection algorithms we investigate the potential uses of iterated function series and Fourier transform operators when preprocessing images of defects in aluminium plate acquired using a linescan camera. We employ a multi-layer perceptron neural network trained by backpropagation as a classifier. We examine the effect on the training process of the number of nodes in the hidden layer and the ability of the network to identify faults in images of aluminium plate. We investigate techniques for introducing positional independence into the network's behaviour. We analyse the pattern of weights induced in the network after training in order to gain insight into the logic of its internal representation. We conclude that the backpropagation training process is sufficiently computationally intensive so as to present a real barrier to further development in practical neural network techniques and seek ways to achieve a speed-up. Weconsider the training process as a search problem and arrive at a process involving multiple, parallel search "vectors" and aspects of genetic algorithms. We implement the system as the mentioned distributed application and comment on its performance

Irrigation Systems and Practices in Challenging Environments

The book Irrigation Systems and Practices in Challenging Environments is divided into two interesting sections, with the first section titled Agricultural Water Productivity in Stressed Environments, which consists of nine chapters technically crafted by experts in their own right in their fields of expertise. Topics range from effects of irrigation on the physiology of plants, deficit irrigation practices and the genetic manipulation, to creating drought tolerant variety and a host of interesting topics to cater for the those interested in the plant water soil atmosphere relationships and agronomic practices relevant in many challenging environments, more so with the onslaught of global warming, climate change and the accompanying agro-meteorological impacts. The second section, with eight chapters, deals with systems of irrigation practices around the world, covering different climate zones apart from showing casing practices for sustainable irrigation practices and more efficient ways of conveying irrigation waters - the life blood of agriculture, undoubtedly the most important sector in the world

Irrigation and drainage in the new millennium

Presented at the 2000 USCID international conference, Challenges facing irrigation and drainage in the new millennium on June 20-24 in Fort Collins, Colorado.Includes bibliographical references.A hydrodynamic model for simulating the flow in Basin irrigation system is presented. An explicit McCormack method is used for solving the governing equations. This method doesn't require any special treatment of advancing or receding fronts such as sub-grid technique. The numerical procedure accommodates for three inflow boundary conditions namely line inflow, corner inflow and fan inflow. The results are compared with observed advance and recession times for two level basin irrigation events available in the literature and two field experiments conducted by authors at WALMI, Vadod, Anand, Gujarat, India. A very good comparison of results is observed. The results for various other cases are also presented

Irrigation and drainage in the new millennium

Presented at the 2000 USCID international conference, Challenges facing irrigation and drainage in the new millennium on June 20-24 in Fort Collins, Colorado.Includes bibliographical references.Climate potential in respect to onset, magnitude and risk associated with rainfall for crop production in the Nilwala basin, Southern Sri Lanka was assessed using the daily rainfall of 12 stations scattered in different locations for more than 35 consecutive years (1950-1995). The program CROPWAT was used to assess the irrigation need. It was revealed that rainfall of the basin increases from south to north with increasing elevation and altitude. Within a 70-km distance in the south north gradient, rainfall elevates from 1656 mm at Kekanadura to 4216 mm at Kudawa. The net irrigation requirement of Yala rice in different locations varied from 1012 mm to 1246 mm. It was established that the irrigation need in the Nilwala upper catchment is below 40 % of the total water requirement, but in downstream areas it constitutes above 70% of the total water demand. Therefore both the Yala and Maha seasons in Nilwala downstream areas appeared to be unsuitable for rice cultivation without supplementary irrigation. From April 10th onward until May 20th is the best period for establishment of perennial crops at upper catchment areas. Optimum dates for crop establishment at the mid and lower part of the catchment falls on the 14th meteorological week. It is important to note that delaying crop establishment in Yala by 2 or 3 weeks from the optimum date would result in a considerable increase of irrigation need even in the upper catchment areas; it is not advisable to delay the establishment of Maha rice until October when rice varieties off our month duration are cultivated