From FPGA to ASIC: A RISC-V processor experience

This work document a correct design flow using these tools in the Lagarto RISC- V Processor and the RTL design considerations that must be taken into account, to move from a design for FPGA to design for ASIC

Concurrent Design of Embedded Control Software

Embedded software design for mechatronic systems is becoming an increasingly time-consuming and error-prone task. In order to cope with the heterogeneity and complexity, a systematic model-driven design approach is needed, where several parts of the system can be designed concurrently. There is however a trade-off between concurrency efficiency and integration efficiency. In this paper, we present a case study on the development of the embedded control software for a real-world mechatronic system in order to evaluate how we can integrate concurrent and largely independent designed embedded system software parts in an efficient way. The case study was executed using our embedded control system design methodology which employs a concurrent systematic model-based design approach that ensures a concurrent design process, while it still allows a fast integration phase by using automatic code synthesis. The result was a predictable concurrently designed embedded software realization with a short integration time

HERO: Heterogeneous Embedded Research Platform for Exploring RISC-V Manycore Accelerators on FPGA

Heterogeneous embedded systems on chip (HESoCs) co-integrate a standard host processor with programmable manycore accelerators (PMCAs) to combine general-purpose computing with domain-specific, efficient processing capabilities. While leading companies successfully advance their HESoC products, research lags behind due to the challenges of building a prototyping platform that unites an industry-standard host processor with an open research PMCA architecture. In this work we introduce HERO, an FPGA-based research platform that combines a PMCA composed of clusters of RISC-V cores, implemented as soft cores on an FPGA fabric, with a hard ARM Cortex-A multicore host processor. The PMCA architecture mapped on the FPGA is silicon-proven, scalable, configurable, and fully modifiable. HERO includes a complete software stack that consists of a heterogeneous cross-compilation toolchain with support for OpenMP accelerator programming, a Linux driver, and runtime libraries for both host and PMCA. HERO is designed to facilitate rapid exploration on all software and hardware layers: run-time behavior can be accurately analyzed by tracing events, and modifications can be validated through fully automated hard ware and software builds and executed tests. We demonstrate the usefulness of HERO by means of case studies from our research

Towards Lattice Quantum Chromodynamics on FPGA devices

In this paper we describe a single-node, double precision Field Programmable Gate Array (FPGA) implementation of the Conjugate Gradient algorithm in the context of Lattice Quantum Chromodynamics. As a benchmark of our proposal we invert numerically the Dirac-Wilson operator on a 4-dimensional grid on three Xilinx hardware solutions: Zynq Ultrascale+ evaluation board, the Alveo U250 accelerator and the largest device available on the market, the VU13P device. In our implementation we separate software/hardware parts in such a way that the entire multiplication by the Dirac operator is performed in hardware, and the rest of the algorithm runs on the host. We find out that the FPGA implementation can offer a performance comparable with that obtained using current CPU or Intel's many core Xeon Phi accelerators. A possible multiple node FPGA-based system is discussed and we argue that power-efficient High Performance Computing (HPC) systems can be implemented using FPGA devices only.Comment: 17 pages, 4 figure

ACE 16k based stand-alone system for real-time pre-processing tasks

This paper describes the design of a programmable stand-alone system for real time vision pre-processing tasks. The system's architecture has been implemented and tested using an ACE16k chip and a Xilinx xc4028xl FPGA. The ACE16k chip consists basically of an array of 128×128 identical mixed-signal processing units, locally interacting, which operate in accordance with single instruction multiple data (SIMD) computing architectures and has been designed for high speed image pre-processing tasks requiring moderate accuracy levels (7 bits). The input images are acquired using the optical input capabilities of the ACE16k chip, and after being processed according to a programmed algorithm, the images are represented at real time on a TFT screen. The system is designed to store and run different algorithms and to allow changes and improvements. Its main board includes a digital core, implemented on a Xilinx 4028 Series FPGA, which comprises a custom programmable Control Unit, a digital monochrome PAL video generator and an image memory selector. Video SRAM chips are included to store and access images processed by the ACE16k. Two daughter boards hold the program SRAM and a video DAC-mixer card is used to generate composite analog video signal.European Commission IST2001 – 38097Ministerio de Ciencia y Tecnología TIC2003 – 09817- C02 – 01Office of Naval Research (USA) N00014021088

Towards a Holistic CAD Platform for Nanotechnologies

Silicon-based CMOS technologies are predicted to reach their ultimate limits by the middle of the next decade. Research on nanotechnologies is actively conducted, in a world-wide effort to develop new technologies able to maintain the Moore's law. They promise revolutionizing the computing systems by integrating tremendous numbers of devices at low cost. These trends will have a profound impact on the architectures of computing systems and will require a new paradigm of CAD. The paper presents a work in progress on this direction. It is aimed at fitting requirements and constraints of nanotechnologies, in an effort to achieve efficient use of the huge computing power promised by them. To achieve this goal we are developing CAD tools able to exploit efficiently these huge computing capabilities promised by nanotechnologies in the domain of simulation of complex systems composed by huge numbers of relatively simple elements.Comment: Submitted on behalf of TIMA Editions (http://irevues.inist.fr/tima-editions

Achieving High Speed CFD simulations: Optimization, Parallelization, and FPGA Acceleration for the unstructured DLR TAU Code

Today, large scale parallel simulations are fundamental tools to handle complex problems. The number of processors in current computation platforms has been recently increased and therefore it is necessary to optimize the application performance and to enhance the scalability of massively-parallel systems. In addition, new heterogeneous architectures, combining conventional processors with specific hardware, like FPGAs, to accelerate the most time consuming functions are considered as a strong alternative to boost the performance. In this paper, the performance of the DLR TAU code is analyzed and optimized. The improvement of the code efficiency is addressed through three key activities: Optimization, parallelization and hardware acceleration. At first, a profiling analysis of the most time-consuming processes of the Reynolds Averaged Navier Stokes flow solver on a three-dimensional unstructured mesh is performed. Then, a study of the code scalability with new partitioning algorithms are tested to show the most suitable partitioning algorithms for the selected applications. Finally, a feasibility study on the application of FPGAs and GPUs for the hardware acceleration of CFD simulations is presented

LEGaTO: first steps towards energy-efficient toolset for heterogeneous computing

LEGaTO is a three-year EU H2020 project which started in December 2017. The LEGaTO project will leverage task-based programming models to provide a software ecosystem for Made-in-Europe heterogeneous hardware composed of CPUs, GPUs, FPGAs and dataflow engines. The aim is to attain one order of magnitude energy savings from the edge to the converged cloud/HPC.Peer ReviewedPostprint (author's final draft

Direct NN-body code on low-power embedded ARM GPUs

This work arises on the environment of the ExaNeSt project aiming at design and development of an exascale ready supercomputer with low energy consumption profile but able to support the most demanding scientific and technical applications. The ExaNeSt compute unit consists of densely-packed low-power 64-bit ARM processors, embedded within Xilinx FPGA SoCs. SoC boards are heterogeneous architecture where computing power is supplied both by CPUs and GPUs, and are emerging as a possible low-power and low-cost alternative to clusters based on traditional CPUs. A state-of-the-art direct $N$-body code suitable for astrophysical simulations has been re-engineered in order to exploit SoC heterogeneous platforms based on ARM CPUs and embedded GPUs. Performance tests show that embedded GPUs can be effectively used to accelerate real-life scientific calculations, and that are promising also because of their energy efficiency, which is a crucial design in future exascale platforms.Comment: 16 pages, 7 figures, 1 table, accepted for publication in the Computing Conference 2019 proceeding