A Scan-Out Power Reduction Method for Multi-Cycle BIST

High test power in logic BIST is a serious problem not only for production test, but also for board test, system debug or field test. Many low power BIST approaches that focus on scan-shift power or capture power have been proposed. However, it is known that a half of scan-shift power is compensated by test responses, which is difficult to control in those approaches. This paper proposes a novel approach that directly reduces scan-out power by modifying some flip-flops\u27 values in scan chains at the last capture. Experimental results show that the proposed method reduces scan-out power up to 30% with little loss of test coverage.2012 IEEE 21st Asian Test Symposium, 19-22 Nov. 2012, Niigata, Japa

A novel scan segmentation design method for avoiding shift timing failure in scan testing

ITC : 2011 IEEE International Test Conference , 20-22 Sep. 2011 , Anaheim, CA, USAHigh power consumption in scan testing can cause undue yield loss which has increasingly become a serious problem for deep-submicron VLSI circuits. Growing evidence attributes this problem to shift timing failures, which are primarily caused by excessive switching activity in the proximities of clock paths that tends to introduce severe clock skew due to IR-drop-induced delay increase. This paper is the first of its kind to address this critical issue with a novel layout-aware scheme based on scan segmentation design, called LCTI-SS (Low-Clock-Tree-Impact Scan Segmentation). An optimal combination of scan segments is identified for simultaneous clocking so that the switching activity in the proximities of clock trees is reduced while maintaining the average power reduction effect on conventional scan segmentation. Experimental results on benchmark and industrial circuits have demonstrated the advantage of the LCTI-SS scheme

Power Droop Reduction In Logic BIST By Scan Chain Reordering

Significant peak power (PP), thus power droop (PD), during test is a serious concern for modern, complex ICs. In fact, the PD originated during the application of test vectors may produce a delay effect on the circuit under test signal transitions. This event may be erroneously recognized as presence of a delay fault, with consequent generation of an erroneous test fail, thus increasing yield loss. Several solutions have been proposed in the literature to reduce the PD during test of combinational ICs, while fewer approaches exist for sequential ICs. In this paper, we propose a novel approach to reduce peak power/power droop during test of sequential circuits with scan-based Logic BIST. In particular, our approach reduces the switching activity of the scan chains between following capture cycles. This is achieved by an original generation and arrangement of test vectors. The proposed approach presents a very low impact on fault coverage and test time

Multi-Cycle Test with Partial Observation on Scan-Based BIST Structure

Field test for reliability is usually performed with small amount of memory resource, and it requires a new technique which might be somewhat different from the conventional manufacturing tests. This paper proposes a novel technique that improves fault coverage or reduces the number of test vectors that is needed for achieving the given fault coverage on scan-based BIST structure. We evaluate a multi-cycle test method that observes the values of partial flip-flops on a chip during capture-mode. The experimental result shows that the partial observation achieves fault coverage improvement with small hardware overhead than the full observation.2011 Asian Test Symposium (ATS), 20-23 Nov. 2011, New Delhi, Indi

REDUCING POWER DURING MANUFACTURING TEST USING DIFFERENT ARCHITECTURES

Power during manufacturing test can be several times higher than power consumption in functional mode. Excessive power during test can cause IR drop, over-heating, and early aging of the chips. In this dissertation, three different architectures have been introduced to reduce test power in general cases as well as in certain scenarios, including field test. In the first architecture, scan chains are divided into several segments. Every segment needs a control bit to enable capture in a segment when new faults are detectable on that segment for that pattern. Otherwise, the segment should be disabled to reduce capture power. We group the control bits together into one or more control chains. To address the extra pin(s) required to shift data into the control chain(s) and significant post processing in the first architecture, we explored a second architecture. The second architecture stitches the control bits into the chains they control as EECBs (embedded enable capture bits) in between the segments. This allows an ATPG software tool to automatically generate the appropriate EECB values for each pattern to maintain the fault coverage. This also works in the presence of an on-chip decompressor. The last architecture focuses primarily on the self-test of a device in a 3D stacked IC when an existing FPGA in the stack can be programmed as a tester. We show that the energy expended during test is significantly less than would be required using low power patterns fed by an on-chip decompressor for the same very short scan chains

Power Minimisation Techniques for Testing Low Power VLSI Circuits (PhD Dissertation)

Testing low power very large scale integrated (VLSI) circuits has recently become an area of concern due to yield and reliability problems. This dissertation focuses on minimising power dissipation during test application at logic level and register-transfer level (RTL) of abstraction of the VLSI design flow. The first part of this dissertation addresses power minimisation techniques in scan sequential circuits at the logic level of abstraction. A new best primary input change (BPIC) technique based on a novel test application strategy has been proposed. The technique increases the correlation between successive states during shifting in test vectors and shifting out test responses by changing the primary inputs such that the smallest number of transitions is achieved. The new technique is test set dependent and it is applicable to small to medium sized full and partial scan sequential circuits. Since the proposed test application strategy depends only on controlling primary input change time, power is minimised with no penalty in test area, performance, test efficiency, test application time or volume of test data. Furthermore, it is shown that partial scan does not provide only the commonly known benefits such as less test area overhead and test application time, but also less power dissipation during test application when compared to full scan. To achieve power savings in large scan sequential circuits a new test set independent multiple scan chain-based technique which employs a new design for test (DFT) architecture and a novel test application strategy, is presented. The technique has been validated using benchmark examples, and it has been shown that power is minimised with low computational time, low overhead in test area and volume of test data, and with no penalty in test application time, test efficiency, or performance. The second part of this dissertation addresses power minimisation techniques for testing low power VLSI circuits using built-in self-test (BIST) at RTL. First, it is important to overcome the shortcomings associated with traditional BIST methodologies. It is shown how a new BIST methodology for RTL data paths using a novel concept called test compatibility classes (TCC) overcomes high test application time, BIST area overhead, performance degradation, volume of test data, fault-escape probability, and complexity of the testable design space exploration. Second, power minimisation in BIST RTL data paths is achieved by analysing the effect of test synthesis and test scheduling on power dissipation during test application and by employing new power conscious test synthesis and test scheduling algorithms. Third, the new BIST methodology has been validated using benchmark examples. Further, it is shown that when the proposed power conscious test synthesis and test scheduling is combined with novel test compatibility classes simultaneous reduction in test application time and power dissipation is achieved with low overhead in computational time

An approach to Measure Transition Density of Binary Sequences for X-filling based Test Pattern Generator in Scan based Design

Switching activity and Transition density computation is an essential stage for dynamic power estimation and testing time reduction. The study of switching activity, transition densities and weighted switching activities of pseudo random binary sequences generated by Linear Feedback shift registers and Feed Forward shift registers plays a crucial role in design approaches of Built-In Self Test, cryptosystems, secure scan designs and other applications. This paper proposed an approach to find transition densities, which plays an important role in choosing of test pattern generator We have analyze conventional and proposed designs using our approache, This work also describes the testing time of benchmark circuits. The outcome of this paper is presented in the form of algorithm, theorems with proofs and analyses table which strongly support the same. The proposed algorithm reduces switching activity and testing time up to 51.56% and 84.61% respectively

AN INCLUSIVE TEST PATTERN GENERATOR USING DATA VOLUME COMPRESSION

Because the BIST power consumption can certainly exceed the utmost ratings when testing as fast as possible, scan patterns should be shifted in a programmable low speed, and just the final couple of cycles and also the capture cycle are applied at its peak frequency. Within this paper, we advise a PRPG for LP BIST applications. The suggested hybrid solution enables someone to efficiently combine test compression with logic BIST, where both techniques could work synergistically to provide top quality test. Therefore, it is a really attractive LP test plan that enables for buying and selling-off test coverage, pattern counts, and toggling rates in an exceedingly flexible manner. Particularly, several hybrid BIST schemes store deterministic top-up patterns around the tester inside a compressed form, after which make use of the existing BIST hardware to decompress these test patterns. The bottom is thus provided by  observe that chain 45 isn't incorporated because it features just one specified scan cell. A high probability of manufacturing confirmed logic value inside a purely pseudorandom fashion is really a rationale behind excluding from the base scan chains hosting just one specified bit. Just like conventional scan-based test, hybrid schemes, because of the high data activity connected with scan-based test operations, may consume a lot more power than the usual circuit under-test is built to function under. The generator mainly is aimed at lowering the switching activity during scan loading because of its preselected toggling (PRESTO) levels. LP PRPG can also be able to serving as a completely functional test data decompress or having the ability to control scan shift-in switching activity through the entire process of encoding

Transition Faults and Transition Path Delay Faults: Test Generation, Path Selection, and Built-In Generation of Functional Broadside Tests

As the clock frequency and complexity of digital integrated circuits increase rapidly, delay testing is indispensable to guarantee the correct timing behavior of the circuits. In this dissertation, we describe methods developed for three aspects of delay testing in scan-based circuits: test generation, path selection and built-in test generation. We first describe a deterministic broadside test generation procedure for a path delay fault model named the transition path delay fault model, which captures both large and small delay defects. Under this fault model, a path delay fault is detected only if all the individual transition faults along the path are detected by the same test. To reduce the complexity of test generation, sub-procedures with low complexity are applied before a complete branch-and-bound procedure. Next, we describe a method based on static timing analysis to select critical paths for test generation. Logic conditions that are necessary for detecting a path delay fault are considered to refine the accuracy of static timing analysis, using input necessary assignments. Input necessary assignments are input values that must be assigned to detect a fault. The method calculates more accurate path delays, selects paths that are critical during test application, and identifies undetectable path delay faults. These two methods are applicable to off-line test generation. For large circuits with high complexity and frequency, built-in test generation is a cost-effective method for delay testing. For a circuit that is embedded in a larger design, we developed a method for built-in generation of functional broadside tests to avoid excessive power dissipation during test application and the overtesting of delay faults, taking the functional constraints on the primary input sequences of the circuit into consideration. Functional broadside tests are scan-based two-pattern tests for delay faults that create functional operation conditions during test application. To avoid the potential fault coverage loss due to the exclusive use of functional broadside tests, we also developed an optional DFT method based on state holding to improve fault coverage. High delay fault coverage can be achieved by the developed method for benchmark circuits using simple hardware

A RANDOM TEST PATTERN GENERATOR WITH ENHANCED FAULT COVERAGE

Particularly, several hybrid BIST schemes store deterministic top-up patterns around the tester inside a compressed form, after which make use of the existing BIST hardware to decompress these test patterns. Just like conventional scan-based test, hybrid schemes, because of the high data activity connected with scan-based test operations, may consume a lot more power than the usual circuit under-test is built to function under. Because the BIST power consumption can certainly exceed the utmost ratings when testing as fast as possible, scan patterns should be shifted in a programmable low speed, and just the final couple of cycles and also the capture cycle are applied at its peak frequency. Within this paper, we advise a PRPG for LP BIST applications. The suggested hybrid solution enables someone to efficiently combine test compression with logic BIST, where both techniques could work synergistically to provide top quality test. Therefore, it is a really attractive LP test plan that enables for buying and selling-off test coverage, pattern counts, and toggling rates in an exceedingly flexible manner. The generator mainly is aimed at lowering the switching activity during scan loading because of its preselected toggling (PRESTO) levels. LP PRPG can also be able to serving as a completely functional test data decompress or having the ability to control scan shift-in switching activity through the entire process of encoding. The bottom is thus provided by  observe that chain 45 isn't incorporated because it features just one specified scan cell. A high probability of manufacturing confirmed logic value inside a purely pseudorandom fashion is really a rationale behind excluding from the base scan chains hosting just one specified bit