Photovoltaic stand-alone modular systems, phase 2

The final hardware and system qualification phase of a two part stand-alone photovoltaic (PV) system development is covered. The final design incorporated modular, power blocks capable of expanding incrementally from 320 watts to twenty kilowatts (PK). The basic power unit (PU) was nominally rated 1.28 kWp. The controls units, power collection buses and main lugs, electrical protection subsystems, power switching, and load management circuits are housed in a common control enclosure. Photo-voltaic modules are electrically connected in a horizontal daisy-chain method via Amp Solarlok plugs mating with compatible connectors installed on the back side of each photovoltaic module. A pair of channel rails accommodate the mounting of the modules into a frameless panel support structure. Foundations are of a unique planter (tub-like) configuration to allow for world-wide deployment without restriction as to types of soil. One battery string capable of supplying approximately 240 ampere hours nominal of carryover power is specified for each basic power unit. Load prioritization and shedding circuits are included to protect critical loads and selectively shed and defer lower priority or noncritical power demands. The baseline system, operating at approximately 2 1/2 PUs (3.2 kW pk.) was installed and deployed. Qualification was successfully complete in March 1983; since that time, the demonstration system has logged approximately 3000 hours of continuous operation under load without major incident

System configuration, fault detection, location, isolation and restoration: a review on LVDC Microgrid protections

Low voltage direct current (LVDC) distribution has gained the significant interest of research due to the advancements in power conversion technologies. However, the use of converters has given rise to several technical issues regarding their protections and controls of such devices under faulty conditions. Post-fault behaviour of converter-fed LVDC system involves both active converter control and passive circuit transient of similar time scale, which makes the protection for LVDC distribution significantly different and more challenging than low voltage AC. These protection and operational issues have handicapped the practical applications of DC distribution. This paper presents state-of-the-art protection schemes developed for DC Microgrids. With a close look at practical limitations such as the dependency on modelling accuracy, requirement on communications and so forth, a comprehensive evaluation is carried out on those system approaches in terms of system configurations， fault detection, location, isolation and restoration

Reliability models and analyses of the computing systems

Ph.DDOCTOR OF PHILOSOPH

Derivation of Power System Module Metamodels for Early Shipboard Design Explorations

The U.S. Navy is currently challenged to develop new ship designs under compressed schedules. These ship designs must necessarily incorporate emerging technologies for high power energy conversion in order to enable smaller ship designs with a high degree of electrification and next generation electrified weapons. One way this challenge is being addressed is through development of collaborative concurrent design environment that allows for design space exploration across a wide range of implementation options. The most significant challenge is assurance of a dependable power and energy service via the shipboard Integrated Power and Energy System (IPES). The IPES is largely made up of interconnected power conversion and distribution equipment with allocated functionalities in order to meet demanding Quality of Power, Quality of Service and Survivability requirements. Feasible IPES implementations must fit within the ship hull constraints and must not violate limitations on ship displacement. This Thesis applies the theory of dependability to the use of scalable metamodels for power conversion and distribution equipment within a collaborative concurrent design environment to enable total ship set-based design outcomes that result implementable design specifications for procurement of equipment to be used in the final ship implementation

Z-Source Circuit breaker design and protection schemes for DC micro grid systems

The work presented in this thesis includes recent developments and designs for the novel Z-source dc breaker as well as its application in dc micro grids since it was first proposed for use in dc circuits. The novelty of this work is that the initial Z-source breaker design has been modified and tested extensively in simulation and hardware to provide a more practical solution for dc protection. The first part of this work addresses the design of the breakers and the unique advantages offered by the variations in designs. The second part is focused on protection schemes for multi-breaker systems and using sensor and communication tools to ensure system-wide protection using Z-source breakers. Most of this work has been developed with funding from office of Naval research and is tested primarily for systems replicating an all electric shipboard power system. The results from simulation of large systems and protection schemes are presented in great detail. Laboratory testing for several Z-source breaker designs and multi-breaker systems with a central control is also presented and discussed

Derivation of Power System Module Metamodels for Early Shipboard Design Explorations

The U.S. Navy is currently challenged to develop new ship designs under compressed schedules. These ship designs must necessarily incorporate emerging technologies for high power energy conversion in order to enable smaller ship designs with a high degree of electrification and next generation electrified weapons. One way this challenge is being addressed is through development of collaborative concurrent design environment that allows for design space exploration across a wide range of implementation options. The most significant challenge is assurance of a dependable power and energy service via the shipboard Integrated Power and Energy System (IPES). The IPES is largely made up of interconnected power conversion and distribution equipment with allocated functionalities in order to meet demanding Quality of Power, Quality of Service and Survivability requirements. Feasible IPES implementations must fit within the ship hull constraints and must not violate limitations on ship displacement. This Thesis applies the theory of dependability to the use of scalable metamodels for power conversion and distribution equipment within a collaborative concurrent design environment to enable total ship set-based design outcomes that result implementable design specifications for procurement of equipment to be used in the final ship implementation

Rectifier power converter for marine applications with compensating capacitor and boost converter stage

Environmental concerns and new emissions regulations, as well as increasing power needs for marine electrical grids, are pushing the development of more efficient power converters for shipboard power systems (SPS). The priorities for SPS design are reliability and power density especially in harsh operating conditions. Safety, space, and weight are of paramount importance requirements on a ship. One factor affecting the design of SPS is the high inductive impedance presented by ac generators, which requires high voltage ratios to compensate for. Therefore, ac-dc converters, sitting as they do between ac generators and the dc bus of the SPS, are identified as a point of potential development to improve the form factor and efficiency of SPS. A novel series capacitor compensation technique is proposed and applied to an ac-dc boost rectifier. Time-averaged equations are derived and compared to simulated waveforms generated using MATLAB/Simulink. Total harmonic distortion (THD) and power factor (PF) are calculated and measured. THD is found to be the limiting factor in designing the proposed compensator. The circuit is simulated in one and three phases, and several input-to-output voltage ratios are compared. To verify the practicality of the compensation method, a single-phase 1 kW rated prototype is implemented and practical results are presented and compared with the simulated waveforms. It is found that the compensation method can control THD to acceptable levels for a large range of inductive impedances, suggesting that this solution should be further developed and investigated for application in SPS.Environmental concerns and new emissions regulations, as well as increasing power needs for marine electrical grids, are pushing the development of more efficient power converters for shipboard power systems (SPS). The priorities for SPS design are reliability and power density especially in harsh operating conditions. Safety, space, and weight are of paramount importance requirements on a ship. One factor affecting the design of SPS is the high inductive impedance presented by ac generators, which requires high voltage ratios to compensate for. Therefore, ac-dc converters, sitting as they do between ac generators and the dc bus of the SPS, are identified as a point of potential development to improve the form factor and efficiency of SPS. A novel series capacitor compensation technique is proposed and applied to an ac-dc boost rectifier. Time-averaged equations are derived and compared to simulated waveforms generated using MATLAB/Simulink. Total harmonic distortion (THD) and power factor (PF) are calculated and measured. THD is found to be the limiting factor in designing the proposed compensator. The circuit is simulated in one and three phases, and several input-to-output voltage ratios are compared. To verify the practicality of the compensation method, a single-phase 1 kW rated prototype is implemented and practical results are presented and compared with the simulated waveforms. It is found that the compensation method can control THD to acceptable levels for a large range of inductive impedances, suggesting that this solution should be further developed and investigated for application in SPS