Service Composition for IP Smart Object using Realtime Web Protocols: Concept and Research Challenges

The Internet of Things (IoT) refers to a world-wide network of interconnected physical things using standardized communication protocols. Recent development of Internet Protocol (IP) stacks for resource-constrained devices unveils a possibility for the future IoT based on the stable and scalable IP technology much like today's Internet of computers. One important question remains: how can data and events (denoted as services) introduced by a variety of IP networked things be exchanged and aggregated e ciently in various application domains. Because the true value of IoT lies in the interaction of several services from physical things, answers to this question are essential to support a rapid creation of new IoT smart and ubiquitous applications. The problem is known as service composition. This article explains the practicability of the future full-IP IoT with realtime Web protocols to formally state the problem of service composition for IP smart objects, provides literature review, and discusses its research challenges

Impact of EU duty cycle and transmission power limitations for sub-GHz LPWAN SRDs : an overview and future challenges

Long-range sub-GHz technologies such as LoRaWAN, SigFox, IEEE 802.15.4, and DASH7 are increasingly popular for academic research and daily life applications. However, especially in the European Union (EU), the use of their corresponding frequency bands are tightly regulated, since they must confirm to the short-range device (SRD) regulations. Regulations and standards for SRDs exist on various levels, from global to national, but are often a source of confusion. Not only are multiple institutes responsible for drafting legislation and regulations, depending on the type of document can these rules be informational or mandatory. Regulations also vary from region to region; for example, regulations in the United States of America (USA) rely on electrical field strength and harmonic strength, while EU regulations are based on duty cycle and maximum transmission power. A common misconception is the presence of a common 1% duty cycle, while in fact the duty cycle is frequency band-specific and can be loosened under certain circumstances. This paper clarifies the various regulations for the European region, the parties involved in drafting and enforcing regulation, and the impact on recent technologies such as SigFox, LoRaWAN, and DASH7. Furthermore, an overview is given of potential mitigation approaches to cope with the duty cycle constraints, as well as future research directions

A Survey on Virtualization of Wireless Sensor Networks

Wireless Sensor Networks (WSNs) are gaining tremendous importance thanks to their broad range of commercial applications such as in smart home automation, health-care and industrial automation. In these applications multi-vendor and heterogeneous sensor nodes are deployed. Due to strict administrative control over the specific WSN domains, communication barriers, conflicting goals and the economic interests of different WSN sensor node vendors, it is difficult to introduce a large scale federated WSN. By allowing heterogeneous sensor nodes in WSNs to coexist on a shared physical sensor substrate, virtualization in sensor network may provide flexibility, cost effective solutions, promote diversity, ensure security and increase manageability. This paper surveys the novel approach of using the large scale federated WSN resources in a sensor virtualization environment. Our focus in this paper is to introduce a few design goals, the challenges and opportunities of research in the field of sensor network virtualization as well as to illustrate a current status of research in this field. This paper also presents a wide array of state-of-the art projects related to sensor network virtualization

Models and Protocols for Resource Optimization in Wireless Mesh Networks

Wireless mesh networks are built on a mix of fixed and mobile nodes interconnected via wireless links to form a multihop ad hoc network. An emerging application area for wireless mesh networks is their evolution into a converged infrastructure used to share and extend, to mobile users, the wireless Internet connectivity of sparsely deployed fixed lines with heterogeneous capacity, ranging from ISP-owned broadband links to subscriber owned low-speed connections. In this thesis we address different key research issues for this networking scenario. First, we propose an analytical predictive tool, developing a queuing network model capable of predicting the network capacity and we use it in a load aware routing protocol in order to provide, to the end users, a quality of service based on the throughput. We then extend the queuing network model and introduce a multi-class queuing network model to predict analytically the average end-to-end packet delay of the traffic flows among the mobile end users and the Internet. The analytical models are validated against simulation. Second, we propose an address auto-configuration solution to extend the coverage of a wireless mesh network by interconnecting it to a mobile ad hoc network in a transparent way for the infrastructure network (i.e., the legacy Internet interconnected to the wireless mesh network). Third, we implement two real testbed prototypes of the proposed solutions as a proof-of-concept, both for the load aware routing protocol and the auto-configuration protocol. Finally we discuss the issues related to the adoption of ad hoc networking technologies to address the fragility of our communication infrastructure and to build the next generation of dependable, secure and rapidly deployable communications infrastructures

Data storage solutions for the federation of sensor networks

In the near future, most of our everyday devices will be accessible via some network and uniquely identified for interconnection over the Internet. This new paradigm, called Internet of Things (IoT), is already starting to influence our society and is now driving developments in many areas. There will be thousands, or even millions, of constrained devices that will be connected using standard protocols, such as Constrained Application Protocol (CoAP), that have been developed under certain specifications appropriate for this type of devices. In addition, there will be a need to interconnect networks of constrained devices in a reliable and scalable way, and federations of sensor networks using the Internet as a medium will be formed. To make the federation of geographically distributed CoAP based sensor networks possible, a CoAP Usage for REsource LOcation And Discovery (RELOAD) was recently proposed. RELOAD is a peer-to-peer (P2P) protocol that ensures an abstract storage and messaging service to its clients, and it relies on a set of cooperating peers that form a P2P overlay network for this purpose. This protocol allows to define so-called Usages for applications to work on top of this overlay network. The CoAP Usage for RELOAD is, therefore, a way for CoAP based devices to store their resources in a distributed P2P overlay. Although CoAP Usage for RELOAD is an important step towards the federation of sensor networks, in the particular case of IoT there will be consistency and efficiency problems. This happens because the resources of CoAP devices/Things can be in multiple data objects stored at the overlay network, called P2P resources. Thus, Thing resource updates can end up being consuming, as multiple P2P resources will have to be modified. Mechanisms to ensure consistency become, therefore, necessary. This thesis contributes to advances in the federation of sensor networks by proposing mechanisms for RELOAD/CoAP architectures that will allow consistency to be ensured. An overlay network service, required for such mechanisms to operate, is also proposed.Num futuro próximo, a maioria dos nossos dispositivos do dia-a-dia estarão acessíveis através de uma rede e serão identificados de forma única para poderem interligar-se através da Internet. Este novo paradigma, conhecido hoje por Internet das Coisas (IoT), já está a começar a influenciar a nossa sociedade e está agora a impulsionar desenvolvimentos em inúmeras áreas. Teremos milhares, ou mesmo milhões, de dispositivos restritos que utilizarão protocolos padrão que foram desenvolvidos de forma a cumprir determinadas especificações associadas a este tipo de dispositivos, especificações essas que têm a ver com o facto destes dispositivos terem normalmente restrições de memória, pouca capacidade de processamento e muitos possuirem limitações energéticas. Surgirá ainda a necessidade de interligar, de forma fiável e escalonável, redes de dispositivos restritos.(…

Resource design in constrained networks for network lifetime increase

As constrained "things" become increasingly integrated with the Internet and accessible for interactive communication, energy efficient ways to collect, aggregate, and share data over such constrained networks are needed. In this paper, we propose the use of constrained RESTful environments interfaces to build resource collections having a network lifetime increase in mind. More specifically, based on existing atomic resources, collections are created/designed to become available as new resources, which can be observed. Such resource design should not only match client's interests, but also increase network lifetime as much as possible. For this to happen, energy consumption should be balanced/fair among nodes so that node depletion is delayed. When compared with previous approaches, results show that energy efficiency and network lifetime can be increased while reducing control/registration messages, which are used to set up or change observations