Ultra-Low-Power Embedded SRAM Design for Battery- Operated and Energy-Harvested IoT Applications

Internet of Things (IoT) devices such as wearable health monitors, augmented reality goggles, home automation, smart appliances, etc. are a trending topic of research. Various IoT products are thriving in the current electronics market. The IoT application needs such as portability, form factor, weight, etc. dictate the features of such devices. Small, portable, and lightweight IoT devices limit the usage of the primary energy source to a smaller rechargeable or non-rechargeable battery. As battery life and replacement time are critical issues in battery-operated or partially energy-harvested IoT devices, ultra-low-power (ULP) system on chips (SoC) are becoming a widespread solution of chip makers’ choice. Such ULP SoC requires both logic and the embedded static random access memory (SRAM) in the processor to operate at very low supply voltages. With technology scaling for bulk and FinFET devices, logic has demonstrated to operate at low minimum operating voltages (VMIN). However, due to process and temperature variation, SRAMs have higher VMIN in scaled processes that become a huge problem in designing ULP SoC cores. This chapter discusses the latest published circuits and architecture techniques to minimize the SRAM VMIN for scaled bulk and FinFET technologies and improve battery life for ULP IoT applications

Design of Low-Voltage Digital Building Blocks and ADCs for Energy-Efficient Systems

Increasing number of energy-limited applications continue to drive the demand for designing systems with high energy efficiency. This tutorial covers the main building blocks of a system implementation including digital logic, embedded memories, and analog-to-digital converters and describes the challenges and solutions to designing these blocks for low-voltage operation

Design and Analysis of Robust Low Voltage Static Random Access Memories.

Static Random Access Memory (SRAM) is an indispensable part of most modern VLSI designs and dominates silicon area in many applications. In scaled technologies, maintaining high SRAM yield becomes more challenging since they are particularly vulnerable to process variations due to 1) the minimum sized devices used in SRAM bitcells and 2) the large array sizes. At the same time, low power design is a key focus throughout the semiconductor industry. Since low voltage operation is one of the most effective ways to reduce power consumption due to its quadratic relationship to energy savings, lowering the minimum operating voltage (Vmin) of SRAM has gained significant interest. This thesis presents four different approaches to design and analyze robust low voltage SRAM: SRAM analysis method improvement, SRAM bitcell development, SRAM peripheral optimization, and advance device selection. We first describe a novel yield estimation method for bit-interleaved voltage-scaled 8-T SRAMs. Instead of the traditional trade-off between write and read, the trade-off between write and half select disturb is analyzed. In addition, this analysis proposes a method to find an appropriate Write Word-Line (WWL) pulse width to maximize yield. Second, low leakage 10-T SRAM with speed compensation scheme is proposed. During sleep mode of a sensor application, SRAM retaining data cannot be shut down so it is important to minimize leakage in SRAM. This work adopts several leakage reduction techniques while compensating performance. Third, adaptive write architecture for low voltage 8-T SRAMs is proposed. By adaptively modulating WWL width and voltage level, it is possible to achieve low power consumption while maintaining high yield without excessive performance degradation. Finally, low power circuit design based on heterojunction tunneling transistors (HETTs) is discussed. HETTs have a steep subthreshold swing beneficial for low voltage operation. Device modeling and design of logic and SRAM are proposed.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/91569/1/daeyeonk_1.pd

ULTRALOW-POWER, LOW-VOLTAGE DIGITAL CIRCUITS FOR BIOMEDICAL SENSOR NODES

Ph.DDOCTOR OF PHILOSOPH

Multi-port Memory Design for Advanced Computer Architectures

In this thesis, we describe and evaluate novel memory designs for multi-port on-chip and off-chip use in advanced computer architectures. We focus on combining multi-porting and evaluating the performance over a range of design parameters. Multi-porting is essential for caches and shared-data systems, especially multi-core System-on-chips (SOC). It can significantly increase the memory access throughput. We evaluate FinFET voltage-mode multi-port SRAM cells using different metrics including leakage current, static noise margin and read/write performance. Simulation results show that single-ended multi-port FinFET SRAMs with isolated read ports offer improved read stability and flexibility over classical double-ended structures at the expense of write performance. By increasing the size of the access transistors, we show that the single-ended multi-port structures can achieve equivalent write performance to the classical double-ended multi-port structure for 9% area overhead. Moreover, compared with CMOS SRAM, FinFET SRAM has better stability and standby power. We also describe new methods for the design of FinFET current-mode multi-port SRAM cells. Current-mode SRAMs avoid the full-swing of the bitline, reducing dynamic power and access time. However, that comes at the cost of voltage drop, which compromises stability. The design proposed in this thesis utilizes the feature of Independent Gate (IG) mode FinFET, which can leverage threshold voltage by controlling the back gate voltage, to merge two transistors into one through high-Vt and low-Vt transistors. This design not only reduces the voltage drop, but it also reduces the area in multi-port current-mode SRAM design. For off-chip memory, we propose a novel two-port 1-read, 1-write (1R1W) phasechange memory (PCM) cell, which significantly reduces the probability of blocking at the bank levels. Different from the traditional PCM cell, the access transistors are at the top and connected to the bitline. We use Verilog-A to model the behavior of Ge2Sb2Te5 (GST: the storage component). We evaluate the performance of the two-port cell by transistor sizing and voltage pumping. Simulation results show that pMOS transistor is more practical than nMOS transistor as the access device when both area and power are considered. The estimated area overhead is 1.7�, compared to single-port PCM cell. In brief, the contribution we make in this thesis is that we propose and evaluate three different kinds of multi-port memories that are favorable for advanced computer architectures

Robust Circuit Design for Low-Voltage VLSI.

Voltage scaling is an effective way to reduce the overall power consumption, but the major challenges in low voltage operations include performance degradation and reliability issues due to PVT variations. This dissertation discusses three key circuit components that are critical in low-voltage VLSI. Level converters must be a reliable interface between two voltage domains, but the reduced on/off-current ratio makes it extremely difficult to achieve robust conversions at low voltages. Two static designs are proposed: LC2 adopts a novel pulsed-operation and modulates its pull-up strength depending on its state. A 3-sigma robustness is guaranteed using a current margin plot; SLC inherently reduces the contention by diode-insertion. Improvements in performance, power, and robustness are measured from 130nm CMOS test chips. SRAM is a major bottleneck in voltage-scaling due to its inherent ratioed-bitcell design. The proposed 7T SRAM alleviates the area overhead incurred by 8T bitcells and provides robust operation down to 0.32V in 180nm CMOS test chips with 3.35fW/bit leakage. Auto-Shut-Off provides a 6.8x READ energy reduction, and its innate Quasi-Static READ has been demonstrated which shows a much improved READ error rate. A use of PMOS Pass-Gate improves the half-select robustness by directly modulating the device strength through bitline voltage. Clocked sequential elements, flip-flops in short, are ubiquitous in today’s digital systems. The proposed S2CFF is static, single-phase, contention-free, and has the same number of devices as in TGFF. It shows a 40% power reduction as well as robust low-voltage operations in fabricated 45nm SOI test chips. Its simple hold-time path and the 3.4x improvement in 3-sigma hold-time is presented. A new on-chip flip-flop testing harness is also proposed, and measured hold-time variations of flip-flops are presented.PhDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/111525/1/yejoong_1.pd

Statistical analysis and design of subthreshold operation memories

This thesis presents novel methods based on a combination of well-known statistical techniques for faster estimation of memory yield and their application in the design of energy-efficient subthreshold memories. The emergence of size-constrained Internet-of-Things (IoT) devices and proliferation of the wearable market has brought forward the challenge of achieving the maximum energy efficiency per operation in these battery operated devices. Achieving this sought-after minimum energy operation is possible under sub-threshold operation of the circuit. However, reliable memory operation is currently unattainable at these ultra-low operating voltages because of the memory circuit's vanishing noise margins which shrink further in the presence of random process variations. The statistical methods, presented in this thesis, make the yield optimization of the sub-threshold memories computationally feasible by reducing the SPICE simulation overhead. We present novel modifications to statistical sampling techniques that reduce the SPICE simulation overhead in estimating memory failure probability. These sampling scheme provides 40x reduction in finding most probable failure point and 10x reduction in estimating failure probability using the SPICE simulations compared to the existing proposals. We then provide a novel method to create surrogate models of the memory margins with better extrapolation capability than the traditional regression methods. These models, based on Gaussian process regression, encode the sensitivity of the memory margins with respect to each individual threshold variation source in a one-dimensional kernel. We find that our proposed additive kernel based models have 32% smaller out-of-sample error (that is, better extrapolation capability outside training set) than using the six-dimensional universal kernel like Radial Basis Function (RBF). The thesis also explores the topological modifications to the SRAM bitcell to achieve faster read operation at the sub-threshold operating voltages. We present a ten-transistor SRAM bitcell that achieves 2x faster read operation than the existing ten-transistor sub-threshold SRAM bitcells, while ensuring similar noise margins. The SRAM bitcell provides 70% reduction in dynamic energy at the cost of 42% increase in the leakage energy per read operation. Finally, we investigate the energy efficiency of the eDRAM gain-cells as an alternative to the SRAM bitcells in the size-constrained IoT devices. We find that reducing their write path leakage current is the only way to reduce the read energy at Minimum Energy operation Point (MEP). Further, we study the effect of transistor up-sizing under the presence of threshold voltage variations on the mean MEP read energy by performing statistical analysis based on the ANOVA test of the full-factorial experimental design.Esta tesis presenta nuevos métodos basados en una combinación de técnicas estadísticas conocidas para la estimación rápida del rendimiento de la memoria y su aplicación en el diseño de memorias de energia eficiente de sub-umbral. La aparición de los dispositivos para el Internet de las cosas (IOT) y la proliferación del mercado portátil ha presentado el reto de lograr la máxima eficiencia energética por operación de estos dispositivos operados con baterias. La eficiencia de energía es posible si se considera la operacion por debajo del umbral de los circuitos. Sin embargo, la operación confiable de memoria es actualmente inalcanzable en estos bajos niveles de voltaje debido a márgenes de ruido de fuga del circuito de memoria, los cuales se pueden reducir aún más en presencia de variaciones randomicas de procesos. Los métodos estadísticos, que se presentan en esta tesis, hacen que la optimización del rendimiento de las memorias por debajo del umbral computacionalmente factible mediante la simulación SPICE. Presentamos nuevas modificaciones a las técnicas de muestreo estadístico que reducen la sobrecarga de simulación SPICE en la estimación de la probabilidad de fallo de memoria. Estos esquemas de muestreo proporciona una reducción de 40 veces en la búsqueda de puntos de fallo más probable, y 10 veces la reducción en la estimación de la probabilidad de fallo mediante las simulaciones SPICE en comparación con otras propuestas existentes. A continuación, se proporciona un método novedoso para crear modelos sustitutos de los márgenes de memoria con una mejor capacidad de extrapolación que los métodos tradicionales de regresión. Estos modelos, basados en el proceso de regresión Gaussiano, codifican la sensibilidad de los márgenes de memoria con respecto a cada fuente de variación de umbral individual en un núcleo de una sola dimensión. Los modelos propuestos, basados en kernel aditivos, tienen un error 32% menor que el error out-of-sample (es decir, mejor capacidad de extrapolación fuera del conjunto de entrenamiento) en comparacion con el núcleo universal de seis dimensiones como la función de base radial (RBF). La tesis también explora las modificaciones topológicas a la celda binaria SRAM para alcanzar velocidades de lectura mas rapidas dentro en el contexto de operaciones en el umbral de tensiones de funcionamiento. Presentamos una celda binaria SRAM de diez transistores que consigue aumentar en 2 veces la operación de lectura en comparacion con las celdas sub-umbral de SRAM de diez transistores existentes, garantizando al mismo tiempo los márgenes de ruido similares. La celda binaria SRAM proporciona una reducción del 70% en energía dinámica a costa del aumento del 42% en la energía de fuga por las operaciones de lectura. Por último, se investiga la eficiencia energética de las células de ganancia eDRAM como una alternativa a los bitcells SRAM en los dispositivos de tamaño limitado IOT. Encontramos que la reducción de la corriente de fuga en el path de escritura es la única manera de reducir la energía de lectura en el Punto Mínimo de Energía (MEP). Además, se estudia el efecto del transistor de dimensionamiento en virtud de la presencia de variaciones de voltaje de umbral en la media de energia de lecture MEP mediante el análisis estadístico basado en la prueba de ANOVA del diseño experimental factorial completo.Postprint (published version

Robust low-power digital circuit design in nano-CMOS technologies

Device scaling has resulted in large scale integrated, high performance, low-power, and low cost systems. However the move towards sub-100 nm technology nodes has increased variability in device characteristics due to large process variations. Variability has severe implications on digital circuit design by causing timing uncertainties in combinational circuits, degrading yield and reliability of memory elements, and increasing power density due to slow scaling of supply voltage. Conventional design methods add large pessimistic safety margins to mitigate increased variability, however, they incur large power and performance loss as the combination of worst cases occurs very rarely. In-situ monitoring of timing failures provides an opportunity to dynamically tune safety margins in proportion to on-chip variability that can significantly minimize power and performance losses. We demonstrated by simulations two delay sensor designs to detect timing failures in advance that can be coupled with different compensation techniques such as voltage scaling, body biasing, or frequency scaling to avoid actual timing failures. Our simulation results using 45 nm and 32 nm technology BSIM4 models indicate significant reduction in total power consumption under temperature and statistical variations. Future work involves using dual sensing to avoid useless voltage scaling that incurs a speed loss. SRAM cache is the first victim of increased process variations that requires handcrafted design to meet area, power, and performance requirements. We have proposed novel 6 transistors (6T), 7 transistors (7T), and 8 transistors (8T)-SRAM cells that enable variability tolerant and low-power SRAM cache designs. Increased sense-amplifier offset voltage due to device mismatch arising from high variability increases delay and power consumption of SRAM design. We have proposed two novel design techniques to reduce offset voltage dependent delays providing a high speed low-power SRAM design. Increasing leakage currents in nano-CMOS technologies pose a major challenge to a low-power reliable design. We have investigated novel segmented supply voltage architecture to reduce leakage power of the SRAM caches since they occupy bulk of the total chip area and power. Future work involves developing leakage reduction methods for the combination logic designs including SRAM peripherals

Product assurance technology for procuring reliable, radiation-hard, custom LSI/VLSI electronics

Advanced measurement methods using microelectronic test chips are described. These chips are intended to be used in acquiring the data needed to qualify Application Specific Integrated Circuits (ASIC's) for space use. Efforts were focused on developing the technology for obtaining custom IC's from CMOS/bulk silicon foundries. A series of test chips were developed: a parametric test strip, a fault chip, a set of reliability chips, and the CRRES (Combined Release and Radiation Effects Satellite) chip, a test circuit for monitoring space radiation effects. The technical accomplishments of the effort include: (1) development of a fault chip that contains a set of test structures used to evaluate the density of various process-induced defects; (2) development of new test structures and testing techniques for measuring gate-oxide capacitance, gate-overlap capacitance, and propagation delay; (3) development of a set of reliability chips that are used to evaluate failure mechanisms in CMOS/bulk: interconnect and contact electromigration and time-dependent dielectric breakdown; (4) development of MOSFET parameter extraction procedures for evaluating subthreshold characteristics; (5) evaluation of test chips and test strips on the second CRRES wafer run; (6) two dedicated fabrication runs for the CRRES chip flight parts; and (7) publication of two papers: one on the split-cross bridge resistor and another on asymmetrical SRAM (static random access memory) cells for single-event upset analysis

Design and analysis of SRAMs for energy harvesting systems

PhD ThesisAt present, the battery is employed as a power source for wide varieties of microelectronic systems ranging from biomedical implants and sensor net-works to portable devices. However, the battery has several limitations and incurs many challenges for the majority of these systems. For instance, the design considerations of implantable devices concern about the battery from two aspects, the toxic materials it contains and its lifetime since replacing the battery means a surgical operation. Another challenge appears in wire-less sensor networks, where hundreds or thousands of nodes are scattered around the monitored environment and the battery of each node should be maintained and replaced regularly, nonetheless, the batteries in these nodes do not all run out at the same time. Since the introduction of portable systems, the area of low power designs has witnessed extensive research, driven by the industrial needs, towards the aim of extending the lives of batteries. Coincidentally, the continuing innovations in the field of micro-generators made their outputs in the same range of several portable applications. This overlap creates a clear oppor-tunity to develop new generations of electronic systems that can be powered, or at least augmented, by energy harvesters. Such self-powered systems benefit applications where maintaining and replacing batteries are impossi-ble, inconvenient, costly, or hazardous, in addition to decreasing the adverse effects the battery has on the environment. The main goal of this research study is to investigate energy harvesting aware design techniques for computational logic in order to enable the capa- II bility of working under non-deterministic energy sources. As a case study, the research concentrates on a vital part of all computational loads, SRAM, which occupies more than 90% of the chip area according to the ITRS re-ports. Essentially, this research conducted experiments to find out the design met-ric of an SRAM that is the most vulnerable to unpredictable energy sources, which has been confirmed to be the timing. Accordingly, the study proposed a truly self-timed SRAM that is realized based on complete handshaking protocols in the 6T bit-cell regulated by a fully Speed Independent (SI) tim-ing circuitry. The study proved the functionality of the proposed design in real silicon. Finally, the project enhanced other performance metrics of the self-timed SRAM concentrating on the bit-line length and the minimum operational voltage by employing several additional design techniques.Umm Al-Qura University, the Ministry of Higher Education in the Kingdom of Saudi Arabia, and the Saudi Cultural Burea