15 research outputs found
Estimation of Radio Channel Parameters
Kurzfassung
Diese Dissertation behandelt die Schätzung der Modellparameter einer
Momentanaufnahme des Mobilfunkkanals. Das besondere Augenmerk liegt zum einen
auf der Entwicklung eines generischen Datenmodells für den gemessenen Funkkanal,
welches für die hochauflösende Parameterschätzung geeignet ist. Der zweite
Schwerpunkt dieser Arbeit ist die Entwicklung eines robusten Parameterschätzers
für die Bestimmung der Parameter des entworfenen Modells aus Funkkanalmessdaten.
Entsprechend dieser logischen Abfolge ist auch der Aufbau dieser Arbeit.
Im ersten Teil wird ausgehend von einem aus der Literatur bekannten
strahlenoptischen Modell eine algebraisch handhabbare Darstellung von
beobachteten Wellenausbreitungspfaden entwickelt. Das mathematische Modell
erlaubt die Beschreibung von SISO (single-input-single-output)-
Übertragungssystemen, also von Systemen mit einer Sendeantenne und einer
Empfangsantenne, als auch die Beschreibung von solchen Systemen mit mehreren
Sende- und/oder Empfangsantennen. Diese Systeme werden im Allgemeinen auch als
SIMO- (single-input-multiple-output), MISO- (multiple-input-single-output) oder
MIMO-Systeme (multiple-input-multiple-output) bezeichnet. Im Gegensatz zu
bekannten Konzepten enthält das entwickelte Modell keine Restriktionen bezüglich
der modellierbaren Antennenarrayarchitekturen. Dies ist besonders wichtig in
Hinblick auf die möglichst vollständige Erfassung der räumlichen Struktur des
Funkkanals. Die Flexibilität des Modells ist eine Grundvoraussetzung für die
optimale Anpassung der Antennenstruktur an die Messaufgabe. Eine solche
angepasste Antennenarraystruktur ist zum Beispiel eine zylindrische Anordnung
von Antennenelementen. Sie ist gut geeignet für die Erfassung der räumlichen
Struktur des Funkkanals (Azimut und Elevation) in so genannten Outdoor-
Funkszenarien. Weiterhin wird im ersten Teil eine neue Komponente des
Funkkanaldatenmodells eingeführt, welche den Beitrag verteilter (diffuser)
Streuungen zur Funkübertragung beschreibt. Die neue Modellkomponente spielt eine
Schlüsselrolle bei der Entwicklung eines robusten Parameterschätzers im
Hauptteil dieser Arbeit. Die fehlende Modellierung der verteilten Streuungen ist
eine der Hauptursachen für die begrenzte Anwendbarkeit und die oft kritisierte
fehlende Robustheit von hochauflösenden Funkkanalparameterschätzern, die in der
Literatur etabliert sind. Das neue Datenmodell beschreibt die so genannten
dominanten Ausbreitungspfade durch eine deterministische Abbildung der
Pfadparameter auf den gemessenen Funkkanal. Der Beitrag der verteilten
Streuungen wird mit Hilfe eines zirkularen mittelwertfreien Gaußschen Prozesses
beschrieben. Die Modellparameter der verteilten Streuungen beschreiben dabei die
Kovarianzmatrix dieses Prozesses. Basierend auf dem entwickelten Datenmodell
wird im Anschluss kurz über aktuelle Konzepte für Funkkanalmessgeräte, so
genannte Channel-Sounder, diskutiert.
Im zweiten Teil dieser Arbeit werden in erster Linie Ausdrücke zur Bestimmung
der erzielbaren Messgenauigkeit eines Channel-Sounders abgeleitet. Zu diesem
Zweck wird die untere Schranke für die Varianz der geschätzten Modellparameter,
das heißt der Messwerte, bestimmt. Als Grundlage für die Varianzabschätzung wird
das aus der Parameterschätztheorie bekannte Konzept der Cramér-Rao-Schranke
angewandt. Im Rahmen der Ableitung der Cramér-Rao-Schranke werden außerdem
wichtige Gesichtspunkte für die Entwicklung eines effizienten Parameterschätzers
diskutiert.
Im dritten Teil der Arbeit wird ein Schätzer für die Bestimmung der
Ausbreitungspfadparameter nach dem Maximum-Likelihood-Prinzip entworfen. Nach
einer kurzen Übersicht über existierende Konzepte zur hochauflösenden
Funkkanalparameterschätzung wird die vorliegende Schätzaufgabe analysiert und in
Hinsicht ihres Typs klassifiziert. Unter der Voraussetzung, dass die Parameter
der verteilten Streuungen bekannt sind, lässt sich zeigen, daß sich die
Schätzung der Parameter der Ausbreitungspfade als ein nichtlineares gewichtetes
kleinstes Fehlerquadratproblem auffassen lässt. Basierend auf dieser Erkenntnis
wird ein generischer Algorithmus zur Bestimmung einer globalen Startlösung für
die Parameter eines Ausbreitungspfades vorgeschlagen. Hierbei wird von dem
Konzept der Structure-Least-Squares (SLS)-Probleme Gebrauch gemacht, um die
Komplexität des Schätzproblems zu reduzieren. Im folgenden Teil dieses
Abschnitts wird basierend auf aus der Literatur bekannten robusten numerischen
Algorithmen ein Schätzer zur genauen Bestimmung der Ausbreitungspfadparameter
abgeleitet. Im letzten Teil dieses Abschnitts wird die Anwendung
unterraumbasierter Schätzer zur Bestimmung der Ausbreitungspfadparameter
diskutiert. Es wird ein speichereffizienter Algorithmus zur Signalraumschätzung
entwickelt. Dieser Algorithmus ist eine Grundvoraussetzung für die Anwendung von
mehrdimensionalen Parameterschätzern wie zum Beispiel des R-D unitary ESPRIT
(Estimation of Signal Parameters via Rotational Invariance Techniques) zur
Bestimmung von Funkkanalparametern aus MIMO-Funkkanalmessungen. Traditionelle
Verfahren zur Signalraumschätzung sind hier im Allgemeinen nicht anwendbar, da
sie einen zu großen Speicheraufwand erfordern. Außerdem wird in diesem Teil
gezeigt, dass ESPRIT-Algorithmen auch zur Parameterschätzung von Daten mit so
genannter versteckter Rotations-Invarianzstruktur eingesetzt werden können. Als
Beispiel wird ein ESPRIT-basierter Algorithmus zur Richtungsschätzung in
Verbindung mit multibeam-Antennenarrays (CUBA) abgeleitet.
Im letzten Teil dieser Arbeit wird ein Maximum-Likelihood-Schätzer für die neue
Komponente des Funkkanals, welche die verteilten Streuungen beschreibt,
entworfen. Ausgehend vom Konzept des iterativen Maximum-Likelihood-Schätzers
wird ein Algorithmus entwickelt, der hinreichend geringe numerische Komplexität
besitzt, so dass er praktisch anwendbar ist. In erster Linie wird dabei von der
Toeplitzstruktur der zu schätzenden Kovarianzmatrix Gebrauch gemacht. Aufbauend
auf dem Schätzer für die Parameter der Ausbreitungspfade und dem Schätzer für
die Parameter der verteilten Streuungen wird ein Maximum-Likelihood-Schätzer
entwickelt (RIMAX), der alle Parameter des in Teil I entwickelten Modells der
Funkanalmessung im Verbund schätzt. Neben den geschätzten Parametern des
Datenmodells liefert der Schätzer zusätzlich Zuverlässigkeitsinformationen.
Diese werden unter anderem zur Bestimmung der Modellordnung, das heißt zur
Bestimmung der Anzahl der dominanten Ausbreitungspfade, herangezogen. Außerdem
stellen die Zuverlässigkeitsinformationen aber auch ein wichtiges Schätzergebnis
dar. Die Zuverlässigkeitsinformationen machen die weitere Verarbeitung und
Wertung der Messergebnisse möglich.The theme of this thesis is the estimation of model parameters of a radio channel snapshot. The main focus was the development of a general data model for the measured radio channel, suitable for both high resolution channel parameter estimation on the one hand, and the development of a robust parameter estimator
for the parameters of the designed parametric radio channel model, in line with this logical work flow is this thesis.
In the first part of this work an algebraic representation of observed
propagation paths is developed using a ray-optical model known from literature. The algebraic framework is suitable for the description of SISO (single-input-single-output) radio transmission systems. A SISO system uses one antenna as the transmitter (Tx) and one antenna as the receiver (Rx). The derived expression for the propagation paths is also suitable to describe SIMO (single-input-multiple-output), MISO (multiple-input-single-output), and MIMO (multiple-input-multiple-output) radio channel measurements. In contrast to other models used for high resolution channel parameter estimation the derived model makes no
restriction regarding the structure of the antenna array used throughout the measurement. This is important since the ultimate goal in radio channel sounding is the complete description of the spatial (angular) structure of the radio channel at Tx and Rx. The flexibility of the data model is a prerequisite for the optimisation of the antenna array structure with respect to the measurement
task. Such an optimised antenna structure is a stacked uniform circular beam array, i.e., a cylindrical arrangement of antenna elements. This antenna array configuration is well suited for the measurement of the spatial structure of the radio channel at Tx and/or Rx in outdoor-scenarios. Furthermore, a new component
of the radio channel model is introduced in the first part of this work. It describes the contribution of distributed (diffuse) scattering to the radio transmission. The new component is key for the development of a robust radio channel parameter estimator, which is derived in the main part of this work. The ignorance of the contribution of distributed scattering to radio propagation is one of the main reasons why high-resolution radio channel parameter estimators fail in practice. Since the underlying data model is wrong the estimators produce erroneous results. The improved model describes the so called dominant propagation paths by a deterministic mapping of the propagation path parameters
to the channel observation. The contribution of the distributed scattering is modelled as a zero-mean circular Gaussian process. The parameters of the distributed scattering process determine the structure of the covariance matrix of this process. Based on this data model current concepts for radio channel sounding devices are discussed.
In the second part of this work expressions for the accuracy achievable by a radio channel sounder are derived. To this end the lower bound on the variance of the measurements i.e. the parameter estimates is derived. As a basis for this evaluation the concept of the Cramér-Rao lower bound is employed. On the way to
the Cramér-Rao lower bound for all channel model parameters, important issues for the development of an appropriate parameter estimator are discussed. Among other things the coupling of model parameters is also discussed.
In the third part of this thesis, an estimator, for the propagation path parameters is derived. For the estimator the 'maximum-likelihood' approach is employed. After a short overview of existing high-resolution channel parameter estimators the estimation problem is classified. It is shown, that the estimation of the parameters of the propagation paths can be understood as a
nonlinear weighted least squares problem, provided the parameters of the distributed scattering process are known. Based on this observation a general algorithm for the estimation of raw parameters for the observed propagation paths is developed. The algorithm uses the concept of structured-least-squares (SLS) and compressed maximum likelihood to reduce the numerical complexity of the estimation problem. A robust estimator for the precise estimation of the propagation path parameters is derived. The estimator is based on concepts well known from nonlinear local optimisation theory. In the last part of this chapter the application of subspace based parameter estimation algorithms for path
parameter estimation is discussed. A memory efficient estimator for the signal subspace needed by, e.g., R-D unitary ESPRIT is derived. This algorithm is a prerequisite for the application of signal subspace based algorithms to MIMO-channel sounding measurements. Standard algorithms for signal subspace estimation (economy size SVD, singular value decomposition) are not suitable
since they require an amount of memory which is too large. Furthermore, it is shown that ESPRIT (Estimation of Signal Parameters via Rotational Invariance Techniques) based algorithms can also be employed for parameter estimation from data having hidden rotation invariance structure. As an example an ESPRIT
algorithm for angle estimation using circular uniform beam arrays (circular multi-beam antennas) is derived.
In the final part of this work a maximum likelihood estimator for the new component of the channel model is developed. Starting with the concept of iterative maximum likelihood estimation, an algorithm is developed having a low computational complexity. The low complexity of the algorithm is achieved by exploiting the Toeplitz-structure of the covariance matrix to estimate. Using
the estimator for the (concentrated, dominant, specular-alike) propagation paths and the parametric estimator for the covariance matrix of the process describing the distributed diffuse scattering a joint estimator for all channel parameter is derived (RIMAX). The estimator is a 'maximum likelihood' estimator and uses the genuine SAGE concept to reduce the computational complexity. The estimator provides additional information about the reliability of the estimated channel parameters. This reliability information is used to determine an appropriate model for the observation. Furthermore, the reliability information i.e. the estimate of the covariance matrix of all parameter estimates is also an important parameter estimation result. This information is a prerequisite for further processing and evaluation of the measured channel parameters
Channel Prediction for Mobile MIMO Wireless Communication Systems
Temporal variation and frequency selectivity of wireless channels constitute
a major drawback to the attainment of high gains in capacity
and reliability offered by multiple antennas at the transmitter and receiver
of a mobile communication system. Limited feedback and adaptive transmission
schemes such as adaptive modulation and coding, antenna selection,
power allocation and scheduling have the potential to provide the platform
of attaining the high transmission rate, capacity and QoS requirements in
current and future wireless communication systems. Theses schemes require
both the transmitter and receiver to have accurate knowledge of Channel
State Information (CSI). In Time Division Duplex (TDD) systems, CSI at
the transmitter can be obtained using channel reciprocity. In Frequency Division
Duplex (FDD) systems, however, CSI is typically estimated at the
receiver and fed back to the transmitter via a low-rate feedback link. Due to
the inherent time delays in estimation, processing and feedback, the CSI obtained
from the receiver may become outdated before its actual usage at the
transmitter. This results in significant performance loss, especially in high
mobility environments. There is therefore a need to extrapolate the varying
channel into the future, far enough to account for the delay and mitigate the
performance degradation.
The research in this thesis investigates parametric modeling and prediction
of mobile MIMO channels for both narrowband and wideband systems.
The focus is on schemes that utilize the additional spatial information offered
by multiple sampling of the wave-field in multi-antenna systems to
aid channel prediction. The research has led to the development of several
algorithms which can be used for long range extrapolation of time-varyingchannels. Based on spatial channel modeling approaches, simple and efficient
methods for the extrapolation of narrowband MIMO channels are proposed.
Various extensions were also developed. These include methods for wideband
channels, transmission using polarized antenna arrays, and mobile-to-mobile
systems.
Performance bounds on the estimation and prediction error are vital when
evaluating channel estimation and prediction schemes. For this purpose, analytical
expressions for bound on the estimation and prediction of polarized
and non-polarized MIMO channels are derived. Using the vector formulation
of the Cramer Rao bound for function of parameters, readily interpretable
closed-form expressions for the prediction error bounds were found for cases
with Uniform Linear Array (ULA) and Uniform Planar Array (UPA). The
derived performance bounds are very simple and so provide insight into system
design.
The performance of the proposed algorithms was evaluated using standardized
channel models. The effects of the temporal variation of multipath
parameters on prediction is studied and methods for jointly tracking the
channel parameters are developed. The algorithms presented can be utilized
to enhance the performance of limited feedback and adaptive MIMO
transmission schemes
The University Defence Research Collaboration In Signal Processing
This chapter describes the development of algorithms for automatic detection of anomalies from multi-dimensional, undersampled and incomplete datasets. The challenge in this work is to identify and classify behaviours as normal or abnormal, safe or threatening, from an irregular and often heterogeneous sensor network. Many defence and civilian applications can be modelled as complex networks of interconnected nodes with unknown or uncertain spatio-temporal relations. The behavior of such heterogeneous networks can exhibit dynamic properties, reflecting evolution in both network structure (new nodes appearing and existing nodes disappearing), as well as inter-node relations.
The UDRC work has addressed not only the detection of anomalies, but also the identification of their nature and their statistical characteristics. Normal patterns and changes in behavior have been incorporated to provide an acceptable balance between true positive rate, false positive rate, performance and computational cost. Data quality measures have been used to ensure the models of normality are not corrupted by unreliable and ambiguous data. The context for the activity of each node in complex networks offers an even more efficient anomaly detection mechanism. This has allowed the development of efficient approaches which not only detect anomalies but which also go on to classify their behaviour
The University Defence Research Collaboration In Signal Processing: 2013-2018
Signal processing is an enabling technology crucial to all areas
of defence and security. It is called for whenever humans and
autonomous systems are required to interpret data (i.e. the signal)
output from sensors. This leads to the production of the
intelligence on which military outcomes depend. Signal processing
should be timely, accurate and suited to the decisions
to be made. When performed well it is critical, battle-winning
and probably the most important weapon which you’ve never
heard of.
With the plethora of sensors and data sources that are
emerging in the future network-enabled battlespace, sensing
is becoming ubiquitous. This makes signal processing more
complicated but also brings great opportunities.
The second phase of the University Defence Research Collaboration
in Signal Processing was set up to meet these complex
problems head-on while taking advantage of the opportunities.
Its unique structure combines two multi-disciplinary
academic consortia, in which many researchers can approach
different aspects of a problem, with baked-in industrial collaboration
enabling early commercial exploitation.
This phase of the UDRC will have been running for 5 years
by the time it completes in March 2018, with remarkable results.
This book aims to present those accomplishments and
advances in a style accessible to stakeholders, collaborators and
exploiters
Listening to Distances and Hearing Shapes:Inverse Problems in Room Acoustics and Beyond
A central theme of this thesis is using echoes to achieve useful, interesting, and sometimes surprising results. One should have no doubts about the echoes' constructive potential; it is, after all, demonstrated masterfully by Nature. Just think about the bat's intriguing ability to navigate in unknown spaces and hunt for insects by listening to echoes of its calls, or about similar (albeit less well-known) abilities of toothed whales, some birds, shrews, and ultimately people. We show that, perhaps contrary to conventional wisdom, multipath propagation resulting from echoes is our friend. When we think about it the right way, it reveals essential geometric information about the sources--channel--receivers system. The key idea is to think of echoes as being more than just delayed and attenuated peaks in 1D impulse responses; they are actually additional sources with their corresponding 3D locations. This transformation allows us to forget about the abstract \emph{room}, and to replace it by more familiar \emph{point sets}. We can then engage the powerful machinery of Euclidean distance geometry. A problem that always arises is that we do not know \emph{a priori} the matching between the peaks and the points in space, and solving the inverse problem is achieved by \emph{echo sorting}---a tool we developed for learning correct labelings of echoes. This has applications beyond acoustics, whenever one deals with waves and reflections, or more generally, time-of-flight measurements. Equipped with this perspective, we first address the ``Can one hear the shape of a room?'' question, and we answer it with a qualified ``yes''. Even a single impulse response uniquely describes a convex polyhedral room, whereas a more practical algorithm to reconstruct the room's geometry uses only first-order echoes and a few microphones. Next, we show how different problems of localization benefit from echoes. The first one is multiple indoor sound source localization. Assuming the room is known, we show that discretizing the Helmholtz equation yields a system of sparse reconstruction problems linked by the common sparsity pattern. By exploiting the full bandwidth of the sources, we show that it is possible to localize multiple unknown sound sources using only a single microphone. We then look at indoor localization with known pulses from the geometric echo perspective introduced previously. Echo sorting enables localization in non-convex rooms without a line-of-sight path, and localization with a single omni-directional sensor, which is impossible without echoes. A closely related problem is microphone position calibration; we show that echoes can help even without assuming that the room is known. Using echoes, we can localize arbitrary numbers of microphones at unknown locations in an unknown room using only one source at an unknown location---for example a finger snap---and get the room's geometry as a byproduct. Our study of source localization outgrew the initial form factor when we looked at source localization with spherical microphone arrays. Spherical signals appear well beyond spherical microphone arrays; for example, any signal defined on Earth's surface lives on a sphere. This resulted in the first slight departure from the main theme: We develop the theory and algorithms for sampling sparse signals on the sphere using finite rate-of-innovation principles and apply it to various signal processing problems on the sphere
Abstracts on Radio Direction Finding (1899 - 1995)
The files on this record represent the various databases that originally composed the CD-ROM issue of "Abstracts on Radio Direction Finding" database, which is now part of the Dudley Knox Library's Abstracts and Selected Full Text Documents on Radio Direction Finding (1899 - 1995) Collection. (See Calhoun record https://calhoun.nps.edu/handle/10945/57364 for further information on this collection and the bibliography).
Due to issues of technological obsolescence preventing current and future audiences from accessing the bibliography, DKL exported and converted into the three files on this record the various databases contained in the CD-ROM.
The contents of these files are:
1) RDFA_CompleteBibliography_xls.zip [RDFA_CompleteBibliography.xls: Metadata for the complete bibliography, in Excel 97-2003 Workbook format; RDFA_Glossary.xls: Glossary of terms, in Excel 97-2003 Workbookformat; RDFA_Biographies.xls: Biographies of leading figures, in Excel 97-2003 Workbook format];
2) RDFA_CompleteBibliography_csv.zip [RDFA_CompleteBibliography.TXT: Metadata for the complete bibliography, in CSV format; RDFA_Glossary.TXT: Glossary of terms, in CSV format; RDFA_Biographies.TXT: Biographies of leading figures, in CSV format];
3) RDFA_CompleteBibliography.pdf: A human readable display of the bibliographic data, as a means of double-checking any possible deviations due to conversion
Speech Recognition
Chapters in the first part of the book cover all the essential speech processing techniques for building robust, automatic speech recognition systems: the representation for speech signals and the methods for speech-features extraction, acoustic and language modeling, efficient algorithms for searching the hypothesis space, and multimodal approaches to speech recognition. The last part of the book is devoted to other speech processing applications that can use the information from automatic speech recognition for speaker identification and tracking, for prosody modeling in emotion-detection systems and in other speech processing applications that are able to operate in real-world environments, like mobile communication services and smart homes
Preconditioners for iterative solutions of large-scale linear systems arising from Biot's consolidation equations
Ph.DDOCTOR OF PHILOSOPH