Interconnect optimizations for nanometer VLSI design

textAs the semiconductor technology scales into deeper sub-micron domain, billions of transistors can be used on a single system-on-chip (SOC) makes interconnection optimization more important roughly for two reasons. First, congestion, power, timing in routing and buffering requirements make inter- connection optimization more and more challenging. Second, gate delay get- ting shorter while the RC delay gets longer due to scaling. Study of interconnection construction and optimization algorithms in real industry flows and designs ends up with interesting findings. One used to be overlooked but very important and practical problem is how to utilize over- the-block routing resources intelligently. Routing over large IP blocks needs special attention as there is almost no way to insert buffers inside hard IP blocks, which can lead to unsolvable slew/timing violations. In current design flows we have seen, the routing resources over the IP blocks were either dealt as routing blockages leading to a significant waste, or simply treated in the same way as outside-the-block routing resources, which would violate the slew constraints and thus fail buffering. To handle that, this work proposes a novel buffering-aware over-the- block rectilinear Steiner minimum tree (BOB-RSMT) algorithm which helps reclaim the “wasted” over-the-block routing resources while meeting user-specified slew constraints. Proposed algorithm incrementally and efficiently migrates initial tree structures with buffering-awareness to meet slew constraints while minimizing wire-length. Moreover, due to the fact that timing optimization is important for the VLSI design, in this work, timing-driven over-the-block rectilinear Steiner tree (TOB-RST) is also studied to optimize critical paths. This proposed TOB-RST algorithm can be used in routing or post-routing stage to provide high-quality topologies to help close timing. Then a follow-up problem emerges: how to accomplish the whole routing with over-the-block routing resources used properly. Utilizing over-the- block routing resources could dramatically improve the routing solution, yet require special attention, since the slew, affected by different RC on different metal layers, must be constrained by buffering and is easily violated. Moreover, even of all nets are slew-legalized, the routing solution could still suffer from heavy congestion problem. A new global router, BOB-Router, is to solve the over-the-block global routing problem through minimizing overflows, wire-length and via count simultaneously without violating slew constraints. Based on my completed works, BOB-RSMT and BOB-Router tremendously improve the overall routing and buffering quality. Experimental results show that proposed over-the-block rectilinear Steiner tree construction and routing completely satisfies the slew constraints and significantly outperforms the obstacle-avoiding rectilinear Steiner tree construction and routing in terms of wire-length, via count and overflows.Electrical and Computer Engineerin

Fast Repeater Tree Construction

Repeaters are used during physical design of chips to improve the electrical and timing properties of interconnections. They are added along Steiner trees that connect root gates to sinks, creating repeater trees. Their construction became a crucial part of chip design. We present a new algorithm to solve the repeater tree construction problem. We first present an extensive version of the Repeater Tree Problem. Our problem formulation encapsulates most of the constraints that have been studied so far. We also consider several aspects for the first time, for example, slew dependent required arrival times at repeater tree sinks. The employed technology, the properties of available repeaters and metal wires, the shape of the chip, the temperature, the voltages, and many other factors highly influence the results of repeater tree construction. To take all this into account, we extensively preprocess the environment to extract parameters for our algorithms. We first present an algorithm for Steiner tree creation and prove that our algorithm is able to create timing-efficient as well as cost-efficient trees. Our algorithm is based on a delay model that accurately describes the timing that one can achieve after repeater insertion upfront. Next, we deal with the problem of adding repeaters to a given Steiner tree. The predominantly used algorithms to solve this problem use dynamic programming. However, they have several drawbacks. Firstly, potential repeater positions along the Steiner tree have to be chosen upfront. Secondly, the algorithms strictly follow the given Steiner tree and miss optimization opportunities. Finally, dynamic programming causes high running times. We present our new buffer insertion algorithm, Fast Buffering, that overcomes these limitations. It is able to produce results with similar quality to a dynamic programming approach but a much better running time. In addition, we also present improvements to the dynamic programming approach that allows us to push the quality at the expense of a high running time. We have implemented our algorithms as part of the BonnTools physical design optimization suite developed at the Research Institute for Discrete Mathematics in cooperation with IBM. Our implementation deals with all tedious details of a grown real-world chip optimization environment. We have created extensive experimental results on challenging real-world test cases provided by our cooperation partner. Our algorithm can solve about 5.7 million instances per hour

Algorithms for the scaling toward nanometer VLSI physical synthesis

Along the history of Very Large Scale Integration (VLSI), we have successfully scaled down the size of transistors, scaled up the speed of integrated circuits (IC) and the number of transistors in a chip - these are just a few examples of our achievement in VLSI scaling. It is projected to enter the nanometer (timing estimation and buffer planning for global routing and other early stages such as floorplanning. A novel path based buffer insertion scheme is also included, which can overcome the weakness of the net based approaches. Part-2 Circuit clustering techniques with the application in Field-Programmable Gate Array (FPGA) technology mapping The problem of timing driven n-way circuit partitioning with application to FPGA technology mapping is studied and a hierarchical clustering approach is presented for the latest multi-level FPGA architectures. Moreover, a more general delay model is included in order to accurately characterize the delay behavior of the clusters and circuit elements

Timing Closure in Chip Design

Achieving timing closure is a major challenge to the physical design of a computer chip. Its task is to find a physical realization fulfilling the speed specifications. In this thesis, we propose new algorithms for the key tasks of performance optimization, namely repeater tree construction; circuit sizing; clock skew scheduling; threshold voltage optimization and plane assignment. Furthermore, a new program flow for timing closure is developed that integrates these algorithms with placement and clocktree construction. For repeater tree construction a new algorithm for computing topologies, which are later filled with repeaters, is presented. To this end, we propose a new delay model for topologies that not only accounts for the path lengths, as existing approaches do, but also for the number of bifurcations on a path, which introduce extra capacitance and thereby delay. In the extreme cases of pure power optimization and pure delay optimization the optimum topologies regarding our delay model are minimum Steiner trees and alphabetic code trees with the shortest possible path lengths. We presented a new, extremely fast algorithm that scales seamlessly between the two opposite objectives. For special cases, we prove the optimality of our algorithm. The efficiency and effectiveness in practice is demonstrated by comprehensive experimental results. The task of circuit sizing is to assign millions of small elementary logic circuits to elements from a discrete set of logically equivalent, predefined physical layouts such that power consumption is minimized and all signal paths are sufficiently fast. In this thesis we develop a fast heuristic approach for global circuit sizing, followed by a local search into a local optimum. Our algorithms use, in contrast to existing approaches, the available discrete layout choices and accurate delay models with slew propagation. The global approach iteratively assigns slew targets to all source pins of the chip and chooses a discrete layout of minimum size preserving the slew targets. In comprehensive experiments on real instances, we demonstrate that the worst path delay is within 7% of its lower bound on average after a few iterations. The subsequent local search reduces this gap to 2% on average. Combining global and local sizing we are able to size more than 5.7 million circuits within 3 hours. For the clock skew scheduling problem we develop the first algorithm with a strongly polynomial running time for the cycle time minimization in the presence of different cycle times and multi-cycle paths. In practice, an iterative local search method is much more efficient. We prove that this iterative method maximizes the worst slack, even when restricting the feasible schedule to certain time intervals. Furthermore, we enhance the iterative local approach to determine a lexicographically optimum slack distribution. The clock skew scheduling problem is then generalized to allow for simultaneous data path optimization. In fact, this is a time-cost tradeoff problem. We developed the first combinatorial algorithm for computing time-cost tradeoff curves in graphs that may contain cycles. Starting from the lowest-cost solution, the algorithm iteratively computes a descent direction by a minimum cost flow computation. The maximum feasible step length is then determined by a minimum ratio cycle computation. This approach can be used in chip design for several optimization tasks, e.g. threshold voltage optimization or plane assignment. Finally, the optimization routines are combined into a timing closure flow. Here, the global placement is alternated with global performance optimization. Netweights are used to penalize the length of critical nets during placement. After the global phase, the performance is improved further by applying more comprehensive optimization routines on the most critical paths. In the end, the clock schedule is optimized and clocktrees are inserted. Computational results of the design flow are obtained on real-world computer chips

Timing-Driven Macro Placement

Placement is an important step in the process of finding physical layouts for electronic computer chips. The basic task during placement is to arrange the building blocks of the chip, the circuits, disjointly within a given chip area. Furthermore, such positions should result in short circuit interconnections which can be routed easily and which ensure all signals arrive in time. This dissertation mostly focuses on macros, the largest circuits on a chip. In order to optimize timing characteristics during macro placement, we propose a new optimistic timing model based on geometric distance constraints. This model can be computed and evaluated efficiently in order to predict timing traits accurately in practice. Packing rectangles disjointly remains strongly NP-hard under slack maximization in our timing model. Despite of this we develop an exact, linear time algorithm for special cases. The proposed timing model is incorporated into BonnMacro, the macro placement component of the BonnTools physical design optimization suite developed at the Research Institute for Discrete Mathematics. Using efficient formulations as mixed-integer programs we can legalize macros locally while optimizing timing. This results in the first timing-aware macro placement tool. In addition, we provide multiple enhancements for the partitioning-based standard circuit placement algorithm BonnPlace. We find a model of partitioning as minimum-cost flow problem that is provably as small as possible using which we can avoid running time intensive instances. Moreover we propose the new global placement flow Self-Stabilizing BonnPlace. This approach combines BonnPlace with a force-directed placement framework. It provides the flexibility to optimize the two involved objectives, routability and timing, directly during placement. The performance of our placement tools is confirmed on a large variety of academic benchmarks as well as real-world designs provided by our industrial partner IBM. We reduce running time of partitioning significantly and demonstrate that Self-Stabilizing BonnPlace finds easily routable placements for challenging designs – even when simultaneously optimizing timing objectives. BonnMacro and Self-Stabilizing BonnPlace can be combined to the first timing-driven mixed-size placement flow. This combination often finds placements with competitive timing traits and even outperforms solutions that have been determined manually by experienced designers

MODELING AND OPTIMIZATION OF TRANSMISSION NETWORKS

This dissertation focuses on transmission networks. These networks play an important role in communication (including data and voice), energy transmission (such as gas, electrical, and oil), and micro-electronics among other areas. In this dissertation, we consider two different problems associated with transmission networks: the dynamics on a data communication network and the optimal design of a general transmission network located on a non-uniform landscape. The first two parts of this dissertation develop and apply mathematical models of congested Internet connections and describe possible extensions to network traffic state estimation and network security. The third part looks at an optimal network design problem through a variation on the Euclidean Steiner tree problem, a well-known network optimization problem

Characterization of marine venoms

Silvia Saggiomo studied the venoms of four species of jellyfish and stonefish. She found that venoms can be studied to understand their mechanisms of action to improve treatment modalities of sting victims. In addition, venoms can also be used for drug discovery that can have positive impacts for human health

Steiner tree optimization for buffers, blockages and bays

Timing optimization is a critical component of deep submicrometer design and buffer insertion is an essential technique for achieving timing closure. This work studies buffer insertion under the constraint that the buffers either: 1) avoid blockages or 2) are contained within preassigned buffer bay regions. We propose a general Steiner-tree formulation to drive this application and present a maze-routing-based heuristic that either avoids blockages or finds buffer bays. We show that the combination of our Steiner-tree optimization with leading-edge buffer-insertion techniques leads to effective solutions on industry designs

Systematics and Diversity of Annelids

In this Special Issue, we address the state of the art of the systematics of the main annelid groups and the improvements in the diversity they hold, with special emphasis on the latest discoveries in well-studied areas, expeditions to unsurveyed areas or environments, or the use of novel techniques that allow for the improvement of biodiversity knowledge. We are hoping that this Special Issue will provide a platform facilitating a review of current knowledge on the subject, identifying current research problems, as well as indicating directions and research trends for the future

Safety and Reliability - Safe Societies in a Changing World

The contributions cover a wide range of methodologies and application areas for safety and reliability that contribute to safe societies in a changing world. These methodologies and applications include: - foundations of risk and reliability assessment and management - mathematical methods in reliability and safety - risk assessment - risk management - system reliability - uncertainty analysis - digitalization and big data - prognostics and system health management - occupational safety - accident and incident modeling - maintenance modeling and applications - simulation for safety and reliability analysis - dynamic risk and barrier management - organizational factors and safety culture - human factors and human reliability - resilience engineering - structural reliability - natural hazards - security - economic analysis in risk managemen