204 research outputs found

    Linear feedback control of transient energy growth and control performance limitations in subcritical plane Poiseuille flow

    Get PDF
    Suppression of the transient energy growth in subcritical plane Poiseuille flow via feedback control is addressed. It is assumed that the time derivative of any of the velocity components can be imposed at the walls as control input, and that full-state information is available. We show that it is impossible to design a linear state-feedback controller that leads to a closed-loop flow system without transient energy growth. In a subsequent step, full-state feedback controllers -- directly targeting the transient growth mechanism -- are designed, using a procedure based on a Linear Matrix Inequalities approach. The performance of such controllers is analyzed first in the linear case, where comparison to previously proposed linear-quadratic optimal controllers is made; further, transition thresholds are evaluated via Direct Numerical Simulations of the controlled three-dimensional Poiseuille flow against different initial conditions of physical interest, employing different velocity components as wall actuation. The present controllers are effective in increasing the transition thresholds in closed loop, with varying degree of performance depending on the initial condition and the actuation component employed

    Some results on disturbance attenuation for Hamiltonian systems via direct discrete-time design

    Get PDF
    The disturbance attenuation and robust disturbance attenuation problems for Hamiltonian systems in the discrete-time setting are considered and some new results are presented. The new results are derived utilizing the recently presented dissipativity equality obtained by adding the dissipation rate function to the classical dissipativity inequality. A selection of the dissipation rate function yields new results. These results include a condition on the dissipation structure of the system to achieve the desired disturbance attenuation level and gives direct construction of optimal control laws for any desired disturbance attenuation level. The results remove the need to solve Hamilton–Jacobi–Isaacs inequalities

    Dynamic output nonfragile reliable control for nonlinear fractional-order glucose–insulin system

    Get PDF
    The main intention of this paper is to scrutinize the problem of internal model-based dynamic output feedback nonfragile reliable control problem for fractional-order glucose–insulin system. Specifically, a robust control law that represents the insulin injection rate is designed in order to regulate the level of glucose in diabetes treatment in the existence of meal disturbance or external glucose infusion due to improper diet. By the construction of suitable Lyapunov functional, a novel set of sufficient conditions is derived with the aid of linear matrix inequalities for obtaining the required dynamic output feedback control law. In particular, the designed controller ensures the robust stability and disturbance attenuation performance against meal disturbance of the glucose–insulin system. Numerical simulation results are performed to verify the advantage of the developed design technique. Specifically, the irregular blood glucose level can be brought down to normal level by injecting suitable rate of insulin to the patient. The result exposes that the level of blood glucose is sustained in the identified ranges via the proposed dynamic output feedback control law.&nbsp

    Variance-constrained multiobjective control and filtering for nonlinear stochastic systems: A survey

    Get PDF
    The multiobjective control and filtering problems for nonlinear stochastic systems with variance constraints are surveyed. First, the concepts of nonlinear stochastic systems are recalled along with the introduction of some recent advances. Then, the covariance control theory, which serves as a practical method for multi-objective control design as well as a foundation for linear system theory, is reviewed comprehensively. The multiple design requirements frequently applied in engineering practice for the use of evaluating system performances are introduced, including robustness, reliability, and dissipativity. Several design techniques suitable for the multi-objective variance-constrained control and filtering problems for nonlinear stochastic systems are discussed. In particular, as a special case for the multi-objective design problems, the mixed H 2 / H ∞ control and filtering problems are reviewed in great detail. Subsequently, some latest results on the variance-constrained multi-objective control and filtering problems for the nonlinear stochastic systems are summarized. Finally, conclusions are drawn, and several possible future research directions are pointed out

    Robust and Resilient State-dependent Control of Continuous-time Nonlinear Systems with General Performance Criteria

    Get PDF
    A novel state-dependent control approach for continuous-time nonlinear systems with general performance criteria is presented in this paper. This controller is optimally robust for model uncertainties and resilient against control feedback gain perturbations in achieving general performance criteria to secure quadratic optimality with inherent asymptotic stability property together with quadratic dissipative type of disturbance reduction. For the system model, unstructured uncertainty description is assumed, which incorporates commonly used types of uncertainties, such as norm-bounded and positive real uncertainties as special cases. By solving a state-dependent linear matrix inequality at each time, sufficient condition for the control solution can be found which satisfies the general performance criteria. The results of this paper unify existing results on nonlinear quadratic regulator, H∞ and positive real control. The efficacy of the proposed technique is demonstrated by numerical simulations of the nonlinear control of the inverted pendulum on a cart system

    Semi-active suspension control problem: some new results using an LPV /H ∞ state feedback input constrained control

    No full text
    International audience— The semi-active suspension control problem faces the challenge of the dissipativity constraints of the semi-active dampers. This induces some compromises (actuator saturation, comfort, road holding...) which need to be taken into account in the control design step. In this paper, a state feedback input constrained control problem for LPV systems is considered with H ∞ performance objective. Stabilization conditions based on the Finsler's Lemma are derived in order to ensure the stability in the presence of the input saturation, and to attenuate the disturbance effects. To this aim, two different Lyapunov functions are used. For the stability analysis, a generalized sector condition for LPV systems is applied to treat the nonlinearity caused by the actuator saturation. The considered performance objective regards the reduction of L 2 gain from the disturbance to the controlled output. The LPV controller is computed from the solution of LMIs considering a polytopic representation for the LPV closed-loop system. These theoretical results are applied to a semi-active suspension system where the dissipativity conditions of the semi-active dampers are recast as saturation conditions on the control inputs. The comfort criteria is used as a performance objective in this study. Some simulation results are presented in order to illustrate the effectiveness of the proposed approach

    Robust moving horizon H∞ control of discrete time-delayed systems with interval time-varying delays

    Get PDF
    In this study, design of a delay-dependent type moving horizon state-feedback control (MHHC) is considered for a class of linear discrete-time system subject to time-varying state delays, norm-bounded uncertainties, and disturbances with bounded energies. The closed-loop robust stability and robust performance problems are considered to overcome the instability and poor disturbance rejection performance due to the existence of parametric uncertainties and time-delay appeared in the system dynamics. Utilizing a discrete-time Lyapunov-Krasovskii functional, some delay-dependent linear matrix inequality (LMI) based conditions are provided. It is shown that if one can find a feasible solution set for these LMI conditions iteratively at each step of run-time, then we can construct a control law which guarantees the closed-loop asymptotic stability, maximum disturbance rejection performance, and closed-loop dissipativity in view of the actuator limitations. Two numerical examples with simulations on a nominal and uncertain discrete-time, time-delayed systems, are presented at the end, in order to demonstrate the efficiency of the proposed method

    Dissipative Stabilization of Linear Systems with Time-Varying General Distributed Delays (Complete Version)

    Full text link
    New methods are developed for the stabilization of a linear system with general time-varying distributed delays existing at the system's states, inputs and outputs. In contrast to most existing literature where the function of time-varying delay is continuous and bounded, we assume it to be bounded and measurable. Furthermore, the distributed delay kernels can be any square-integrable function over a bounded interval, where the kernels are handled directly by using a decomposition scenario without using approximations. By constructing a Krasovski\u{i} functional via the application of a novel integral inequality, sufficient conditions for the existence of a dissipative state feedback controller are derived in terms of matrix inequalities without utilizing the existing reciprocally convex combination lemmas. The proposed synthesis (stability) conditions, which take dissipativity into account, can be either solved directly by a standard numerical solver of semidefinite programming if they are convex, or reshaped into linear matrix inequalities, or solved via a proposed iterative algorithm. To the best of our knowledge, no existing methods can handle the synthesis problem investigated in this paper. Finally, numerical examples are presented to demonstrate the effectiveness of the proposed methodologies.Comment: Accepted by Automatic
    • …
    corecore