LMI based Stability and Stabilization of Second-order Linear Repetitive Processes

This paper develops new results on the stability and control of a class of linear repetitive processes described by a second-order matrix discrete or differential equation. These are developed by transformation of the secondorder dynamics to those of an equivalent first-order descriptor state-space model, thus avoiding the need to invert a possibly ill-conditioned leading coefficient matrix in the original model

Analog, hybrid, and digital simulation

Analog, hybrid, and digital computerized simulation technique

Preconditioning for Sparse Linear Systems at the Dawn of the 21st Century: History, Current Developments, and Future Perspectives

Iterative methods are currently the solvers of choice for large sparse linear systems of equations. However, it is well known that the key factor for accelerating, or even allowing for, convergence is the preconditioner. The research on preconditioning techniques has characterized the last two decades. Nowadays, there are a number of different options to be considered when choosing the most appropriate preconditioner for the specific problem at hand. The present work provides an overview of the most popular algorithms available today, emphasizing the respective merits and limitations. The overview is restricted to algebraic preconditioners, that is, general-purpose algorithms requiring the knowledge of the system matrix only, independently of the specific problem it arises from. Along with the traditional distinction between incomplete factorizations and approximate inverses, the most recent developments are considered, including the scalable multigrid and parallel approaches which represent the current frontier of research. A separate section devoted to saddle-point problems, which arise in many different applications, closes the paper

Investigation of the use of meshfree methods for haptic thermal management of design and simulation of MEMS

This thesis presents a novel approach of using haptic sensing technology combined with virtual environment (VE) for the thermal management of Micro-Electro-Mechanical-Systems (MEMS) design. The goal is to reduce the development cycle by avoiding the costly iterative prototyping procedure. In this regard, we use haptic feedback with virtua lprototyping along with an immersing environment. We also aim to improve the productivity and capability of the designer to better grasp the phenomena operating at the micro-scale level, as well as to augment computational steering through haptic channels. To validate the concept of haptic thermal management, we have implemented a demonstrator with a user friendly interface which allows to intuitively "feel" the temperature field through our concept of haptic texturing. The temperature field in a simple MEMS component is modeled using finite element methods (FEM) or finite difference method (FDM) and the user is able to feel thermal expansion using a combination of different haptic feedback. In haptic application, the force rendering loop needs to be updated at a frequency of 1Khz in order to maintain continuity in the user perception. When using FEM or FDM for our three-dimensional model, the computational cost increases rapidly as the mesh size is reduced to ensure accuracy. Hence, it constrains the complexity of the physical model to approximate temperature or stress field solution. It would also be difficult to generate or refine the mesh in real time for CAD process. In order to circumvent the limitations due to the use of conventional mesh-based techniques and to avoid the bothersome task of generating and refining the mesh, we investigate the potential of meshfree methods in the context of our haptic application. We review and compare the different meshfree formulations against FEM mesh based technique. We have implemented the different methods for benchmarking thermal conduction and elastic problems. The main work of this thesis is to determine the relevance of the meshfree option in terms of flexibility of design and computational charge for haptic physical model

Fourth NASA Workshop on Computational Control of Flexible Aerospace Systems, part 1

The proceedings of the workshop are presented. Some areas of discussion are as follows: modeling, systems identification, and control of flexible aircraft, spacecraft, and robotic systems

From Model-Based to Data-Driven Discrete-Time Iterative Learning Control

This dissertation presents a series of new results of iterative learning control (ILC) that progresses from model-based ILC algorithms to data-driven ILC algorithms. ILC is a type of trial-and-error algorithm to learn by repetitions in practice to follow a pre-defined finite-time maneuver with high tracking accuracy. Mathematically ILC constructs a contraction mapping between the tracking errors of successive iterations, and aims to converge to a tracking accuracy approaching the reproducibility level of the hardware. It produces feedforward commands based on measurements from previous iterations to eliminates tracking errors from the bandwidth limitation of these feedback controllers, transient responses, model inaccuracies, unknown repeating disturbance, etc. Generally, ILC uses an a priori model to form the contraction mapping that guarantees monotonic decay of the tracking error. However, un-modeled high frequency dynamics may destabilize the control system. The existing infinite impulse response filtering techniques to stop the learning at such frequencies, have initial condition issues that can cause an otherwise stable ILC law to become unstable. A circulant form of zero-phase filtering for finite-time trajectories is proposed here to avoid such issues. This work addresses the problem of possible lack of stability robustness when ILC uses an imperfect a prior model. Besides the computation of feedforward commands, measurements from previous iterations can also be used to update the dynamic model. In other words, as the learning progresses, an iterative data-driven model development is made. This leads to adaptive ILC methods. An indirect adaptive linear ILC method to speed up the desired maneuver is presented here. The updates of the system model are realized by embedding an observer in ILC to estimate the system Markov parameters. This method can be used to increase the productivity or to produce high tracking accuracy when the desired trajectory is too fast for feedback control to be effective. When it comes to nonlinear ILC, data is used to update a progression of models along a homotopy, i.e., the ILC method presented in this thesis uses data to repeatedly create bilinear models in a homotopy approaching the desired trajectory. The improvement here makes use of Carleman bilinearized models to capture more nonlinear dynamics, with the potential for faster convergence when compared to existing methods based on linearized models. The last work presented here finally uses model-free reinforcement learning (RL) to eliminate the need for an a priori model. It is analogous to direct adaptive control using data to directly produce the gains in the ILC law without use of a model. An off-policy RL method is first developed by extending a model-free model predictive control method and then applied in the trial domain for ILC. Adjustments of the ILC learning law and the RL recursion equation for state-value function updates allow the collection of enough data while improving the tracking accuracy without much safety concerns. This algorithm can be seen as the first step to bridge ILC and RL aiming to address nonlinear systems

Model learning for trajectory tracking of robot manipulators

Abstract Model based controllers have drastically improved robot performance, increasing task accuracy while reducing control effort. Nevertheless, all this was realized with a very strong assumption: the exact knowledge of the physical properties of both the robot and the environment that surrounds it. This assertion is often misleading: in fact modern robots are modeled in a very approximate way and, more important, the environment is almost never static and completely known. Also for systems very simple, such as robot manipulators, these assumptions are still too strong and must be relaxed. Many methods were developed which, exploiting previous experiences, are able to refine the nominal model: from classic identification techniques to more modern machine learning based approaches. Indeed, the topic of this thesis is the investigation of these data driven techniques in the context of robot control for trajectory tracking. In the first two chapters, preliminary knowledge is provided on both model based controllers, used in robotics to assure precise trajectory tracking, and model learning techniques. In the following three chapters, are presented the novelties introduced by the author in this context with respect to the state of the art: three works with the same premise (an inaccurate system modeling), an identical goal (accurate trajectory tracking control) but with small differences according to the specific platform of application (fully actuated, underactuated, redundant robots). In all the considered architectures, an online learning scheme has been introduced to correct the nominal feedback linearization control law. Indeed, the method has been primarily introduced in the literature to cope with fully actuated systems, showing its efficacy in the accurate tracking of joint space trajectories also with an inaccurate dynamic model. The main novelty of the technique was the use of only kinematics information, instead of torque measurements (in general very noisy), to online retrieve and compensate the dynamic mismatches. After that the method has been extended to underactuated robots. This new architecture was composed by an online learning correction of the controller, acting on the actuated part of the system (the nominal partial feedback linearization), and an offline planning phase, required to realize a dynamically feasible trajectory also for the zero dynamics of the system. The scheme was iterative: after each trial, according to the collected information, both the phases were improved and then repeated until the task achievement. Also in this case the method showed its capability, both in numerical simulations and on real experiments on a robotics platform. Eventually the method has been applied to redundant systems: differently from before, in this context the task consisted in the accurate tracking of a Cartesian end effector trajectory. In principle very similar to the fully actuated case, the presence of redundancy slowed down drastically the learning machinery convergence, worsening the performance. In order to cope with this, a redundancy resolution was proposed that, exploiting an approximation of the learning algorithm (Gaussian process regression), allowed to locally maximize the information and so select the most convenient self motion for the system; moreover, all of this was realized with just the resolution of a quadratic programming problem. Also in this case the method showed its performance, realizing an accurate online tracking while reducing both the control effort and the joints velocity, obtaining so a natural behaviour. The thesis concludes with summary considerations on the proposed approach and with possible future directions of research

Extravehicular activities limitations study. Volume 1: Physiological limitations to extravehicular activity in space

This report contains the results of a comprehensive literature search on physiological aspects of EVA. Specifically, the topics covered are: (1) Oxygen levels; (2) Optimum EVA work; (3) Food and Water; (4) Carbon dioxide levels; (5) Repetitive decompressions; (6) Thermal, and (7) Urine collection. The literature was assessed on each of these topics, followed by statements on conclusions and recommended future research needs